Goshfun Motherboard Kit for Repairing and Upgrading of NERF Modulus Regulator C1295 Regulator
- The modified body can be refit 12v lithium battery..
- Since the original main body can not modify aluminum battery after changing the flywheel, it is very limited in performance. After the main board is modified, the main board can withstand the voltage of 12-20v, and the lithium battery can be discharged with large rate, which is convenient for subsequent modification of metal flywheel, flywheel cage and other products.
- Feature-rich: Single / three / burst mode, dart count, empty magazine on-hook, flywheel instantaneous stop / noise reduction control, voltage display and low voltage prompt.
- Motherboard kit for repairing and upgrading damaged motherboard of NERF modulus Regulator C1295 REGULATOR.
- Simple installation: the wire is fixed with screw column, can be installed without welding. Wide voltage operation (6-12V). Can hold for most 2s motor.
Check StockBIGTREETECH Direct Octopus V1.1 Silent 32 Bit Control Board 3D + TFT35 E3 V3.0 Two Mode Display Screen 3D Printer Parts for Creality Ender 3/5 CR10
- 【Main Control Chip】Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz..
- 【Strong DIY Support】This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total.
- 【Realize Online Printing】Interfaces with a Raspberry Pi using emulated serial over USB or direct UART to any of the serial ports on the board, to....
- 【Motherboard Expansion Function】Support BLTouch, locked-rotor detection, shutdown after printing, resume printing after power failure, CAN bus, U....
- 【Increase Protection Function】Uses high-performance MOSFETs to increase heating efficiency while also reducing heat generation on the motherboard.....
Check Stock
LRONG 1PC PC Chassis Fan Hub CPU Cooling HUB Fan PWM Hub SATA Controller Speed Controller
- 12V 10-way 4pin SATA fan hub, to solve the problem of insufficient motherboard fan ports. The hub has 10 fan ports, can support 10 fans, can meet various host requirements, and supports 3pin/4pin fans..
- Installation steps: The PWM port is connected to the CPU fan port on the motherboard. The red port is dedicated to the CPU fan. Connect 1 fan to the red portand then connect the rest of the fans. Then you need to connect the fan hub’s PWM cable to the motherboard. Connect the SATA cable to the fan hub..
- Equipped with PWM cable: The hub is equipped with a PWM cable with a length of 40CM, which can support the back line. After the PWM cable is connected to the main board, the temperature control and speed can be controlled by the main board..
- Convenient installation: the hub is fixed with 3M glue, and the back of each hub is equipped with an American 3M glue, which can make the hub work well.
- Package content: 1 X 12V 10-channel 4pin fan hub, 1X PWM connection cable..
Check StockX58 PC Motherboard, LGA 1366 Motherboard 2 DDR3, Gaming Motherboard Support ECC Memory USB2.0 SATA Port PCB Motherboard for Desktop Computer
- 【2×DDR3 MEMORY】: The LGA1366 computer motherboard with main chipset for Intel X58, supports 2×DDR3 DIMM, and the memory type is DDR3 1866MHz, 1600MHz, 1333MHz, support ECC memory..
- 【LGA1366 CPU Slot】: Desktop motherboard LGA1366 with CPU slot LGA 1366, support 1 CPU, plug in the power supply, CPU, hard drive, memory, and display to use..
- 【ALL SOLIDLY CAPACITOR】: Computer motherboard with all solidly capacitor design, the quality of the power supply cooling block is more stable and durable than ordinary capacitors..
- 【SATA PORT】: PC gaming motherboard supports SATA port, which is compact and easy to install. It is easy to use and has high compatibility..
- 【Stable Power Socket】: Motherboard LGA1366 with one 8 pines power socket, one 24 pin power connector, made of high quality PCB material, with high performance and stable performance..
Check StockLGA 775 Motherboard Integrated 6 Channels DDR3 1066/1333MHz for G41 Chipset Desktop Computer 3 in 1 Function of Integrated Graphics Sound Card and Network Card
- 【LGA 775 DDR3 Motherboard】Professional designed DDR3 motherboard possess dual channel, 2 x DDR3 DIMM, CPU socket LGA 775, Main Chipset For G41,is....
- 【Integrated G41 Desktop Motherboard】The LGA775 motherboard possess the function of integrated graphics, sound card and network card, Integrated 6....
- 【Multi Practical Port】Support IDE port, Expansion Slot: 1 x PCI-Ex16 graphics card slot, 1 x PCI slot, 2 x USB2.0 slot, 4 x SATA2.0 interface, 1 x....
- 【Easy to Install】Made of high-quality materials, come with high performance and stable performance,small in size, easy to install, no other....
- 【100% Satisfaction Guarantee】This LGA775 Motherboard has a complete after-sales service, If you have any questions about the product or you are....
Check StockCreality 48CM TF to Micro SD TF Extension Cable Memory Card Adapter for/Raspberry Pi/Arduino GPS TV SDXC Creality CR10/10S/S4/S5/Ender 3/Ender 3 Pro Monoprice Select Mini 3D Printer
- 【Main Control Chip】Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz..
- 【Strong DIY Support】This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total.
- 【Realize Online Printing】Interfaces with a Raspberry Pi using emulated serial over USB or direct UART to any of the serial ports on the board, to....
- 【Motherboard Expansion Function】Support BLTouch, locked-rotor detection, shutdown after printing, resume printing after power failure, CAN bus, U....
- 【Increase Protection Function】Uses high-performance MOSFETs to increase heating efficiency while also reducing heat generation on the motherboard.....
Check Stock
SinLoon DB25 to IDC 26 Pin Cable,Motherboard Slot Plate Parallel Panel DB-25 Female to 26 Pin IDC Socket Flat Cable
- Product Name: Full copper cable core DB25P female to IDC26P female baffle cable.
- IDC26 to DB25 (Parallel). Female to female connection. Perfect for the SmoothStepper, UC400 and other CNC boards.
- The DB25 connector also fits directly into the DB25 slot of most cases. Add 1 motherboard cable adapter DB-25 Female to 26 Pin port to your computer,Ensure smooth data flow from your parallel port. This adapter cable connects to the motherboard or I/O adapter via flat ribbon cabling. Compatible with most brands of motherboards and I/O cards. The 11-inch length exceeds the standard length of cables often provided with motherboards, and provides flexibility for your connection..
- Note:Do not insert the LPT1 pin on the main board. The red side line is the 1st line. The corresponding 1st pin on the main board usually has a red line.003cbr003e The printer port working mode (parallel port mode) in the motherboard BIOS, please set to Normal003cbr003e.
- Package Content: 1 x DB25 to IDC 26 IDC Socket Flat Cable ,Length Cable : 30cm.
Check StockProfessional Main Board Motherboard Compatible with Epson L1800 Flatbed Printer
- Suitable Compatible with printer model: Compatible with Epson L1800.
- Main board motherboard Compatible with Epson L1800 Flatbed Printer.
Check StockDell Optiplex 760 SFF Motherboard F373D 0F373D
- Main Logic System Board Assembly Motherboard.
- Fits DELL Optiplex 760 Small Form Factor SFF Only.
- Motherboard only. Intel CPU/Memory/Fans NOT included.
Check StockDell Optiplex 760 Motherboard M863N
- Main Logic System Board Assembly Motherboard.
- Fits DELL Optiplex 760 Small Form Factor SFF Only.
- Motherboard only. Intel CPU/Memory/Fans NOT included.
Check StockDell Motherboard Tower M858N Optiplex 760
- Main Logic System Board Assembly Motherboard.
- Fits DELL Optiplex 760 Small Form Factor SFF Only.
- Motherboard only. Intel CPU/Memory/Fans NOT included.
Check StockDell Optiplex 760 SFF Motherboard F373D 0F373D (Certified Refurbished)
- Main Logic System Board Assembly Motherboard.
- Fits DELL Optiplex 760 Small Form Factor SFF Only.
- Motherboard only. Intel CPU/Memory/Fans NOT included.
Check StockRocketek Motherboard USB 2.0 9pin Header 1 to 2 Extension Hub Splitter Adapter - Converter MB USB 2.0 Female to 2 Female - 30CM Cable USB 9-pin Internal Cable 9 pin Connector Adapter Port Multiplier …
- Wide Application: Internal 9pin USB Splitter Convert 1 motherboard USB 2.0 male to 2 Females. This adapter as an USB 2.0 motherboard splitter can....
- Easy Install: motherboard internal USB splitter with back 3M glue to stick in your case. Cable length is 30cm, small enough that you can place it main....
- Safe and Reliable:USB 2.0 header hub with wire belt shielding, prevent short circuit of board..
- Wide Compatibility: PC USB splitter motherboard with Win 2000/Win XP/2003/Vista/2008/Win 7/Win 8/Win10/Linux/Mac. Lighting Node Pro.
- After-sale Service: USB header splitter for Lenovo Motherboard with 24-month hassle-free manufacturer's warranty/free lifetime technical & money back....
Check Stock
