Best Mainboard
AEDIKO 20pcs Computer Mainboard Buzzer PC Internal Speaker Computer Motherboard Case Beep Alarm Buzzer
- Mainboard Buzzer Length: Wire Length: 35mm/1.38inch, Total Length: 60mm/2.36inch.
- Buzzer Cable: The Red Line is Positive, the Black Line is Negative.
- Function: The Sound of the PC Internal Speaker Buzzer Can Judge the Working Status of The Motherboard.
- Easy to Install: The Computer Motherboard Internal Speaker Come with 4 Pin Female Header Connector , Just Plug the Buzzer Into the Speaker Interface Of Mainboard Then Work.
- Package Contents: 20pcs Motherboard Computer PC Internal Speaker Buzzer.
Check StockFully Welded Assembled DSO138 2.4
- Update From kuman 13803KThe sensitivity of DSO Shell oscilloscope has been extended in both directions and is higher and wider than DSO138 oscilloscope. It reaches 5mV/div --- 20V/div while DSO138 is only 10mV/div --- 5V/div.
- More Applications Display and MCU are now mounted on the same board (mainboard) to avoid using inter-board pin-headers, Analog channel is placed on a separated board which contains most user install parts. This brings in better separation between analog and digital circuits. Without the analog portion the mainboard can be used in many other applications..
- Rotary encoder has been added It makes parameter adjustment much quicker and easier..
- DSO Shell comes with full enclosure The front panel and top/bottom brackets are flexible for easy user modification..
- Detailed InstructionDetailed assembly instructions are provided in combination with troubleshooting guide and schematic..
Check StockCreality CR-10S 3D Printer HICTOP Filament Monitor Dual Z axis Screw Rods 300x300x400mm
- UPGRADE: CR-10S updated with dual Z axies leading screw rod which make printing quality better and more stable, with different mainboard and firmware....
- RESUME PRINTS: CR-10S has the ability to resume prints even after a power outage or lapse occurs..
- FILAMENT MONITOR: CR-10S mainboard with filament alarming function, this function can detective if filament is running out or not..
- WITH TWO COLORS (BLUE AND ORANGE) decorative strips inside. You can use either of them as per your preference..
- EASY ASSEMBLY: Delivery with three sets, just need about 10 minutes to assemble well..
Check StockCablecc USB 3.1 Front Panel Socket & USB 2.0 to PCI-E Express Card Adapter for Motherboard
- Connector1: USB 2.0 Socket Connector2: USB 3.1 Front Panel Header.
- The adapter is a converter to convert the available PCI-E of a motherboard into a USB 3.1 header..
- Thus the USB 3.1 port of a housing can also be supplied with USB 3.1 without a suitable mainboard. The compact adapter can be inserted directly and....
- Converter plug-in for the mainboard Fits into any USB 3.0 header Bundling in USB 3.1 with up to 10 GBit / s.
- The adapter is the perfect solution to use the USB 3.1 connectors with Type-C or Type-A. Thus, two data lines with 5 Gbps each are available, which....
Check StockLEP1 Customs LVL23P2 Easy to Assemble Pandora s Box Bartop Arcade Cabinet Kit
- [3A Games Mainboard]: Real Pandora's Box EX. Preloaded 3300 games. Pandora Box EX Support up to 4 Players to enjoy the games at the same time! Playing....
- [Full HD Supports 1920x1080 Resolution]: The mainboard has two kinds of video output ports: HD and VGA,VGA only outputs 1280x720 resolution, HD....
- [Home Edition Version]: This is not a Jamma Standard Arcade board, home edition arcade board with more stable system and easier DIY function. Wiring....
- [Advantages of Full DIY Kit]: Home Edition Arcade kit with power cord, buttons, joysticks which makes this a whole complete kit, easy to install, no....
- [Complete list of Games]: Please feel free to contact for the Pandora Box EX games list. Pandora Box EX Support language: English / Korean /....
Check Stock
Creality Ender 5 Pro 3D Printer Upgrade Silent Motherboard and Metal Feeder Extruder with Capricorn Bowden PTFE Tube
- 【Upgraded V4.2.2 silent Mainboard】Ender 5 pro Upgrade Motherboard Silent Mainboard with TMC2208 Driver.
- 【Metal Extruder Frame】Creality Ender 5 Pro 3D Printer is a highly durable metal extruder . This feature provides stronger pressure while pushing filament through the 3D Printer's nozzle.
- 【Premium PTFE Tube-High】The Capricorn Bowden PTFE Tubing has a 1.9mm ± 0.05mm inner diameter, reducing any excess wiggle room and preventing the filament from buckling inside of the tube.
- 【Cube Frame 3D Printer】Ender 5 Pro has a rigid extruded aluminum cube frame, making it very sturdy when assembled properly, which goes a long way to increasing print quality.
- 【1-year warranty】We have equality warranty and provide after-sale customer service for the product. If any quality issue, Please feel free to contact us via Amazon, we will offer professional instructions and solutions timely..
Check StockOfficial Creality Ender 5 Pro 3D Printer Upgrade Silent Mainboard with Metal Extruder Frame Use Capricorn Bowden PTFE Tubing 220 x 220 x 300mm Build Volume
- Upgraded Silent Mainboard : Ender 5 Pro 3d printer comes with upgraded V4.2.2 silent Mainboard with TMC2208 drivers, allowing for quieter and more....
- Capricorn Premium XS Bowden Tubing: Imported Capricorn blue tube with high temperature resistant makes feeding smoother and ensure great printing....
- Metal Extruder Kit: Ender 5 Pro adopts Creality metal extruder which has better stronger pressure to pushing filament into printer nozzle, improving....
- Brand Power Supply: Built-in brand power supply, heat up the hot bed to 110℃ in 5 minutes..
- Semi-Assembled Kits: Creality ender 5 pro comes with several partially assembled kits, very easy to assemble and allow you to learn about the basic....
Check StockDesktop Motherboard, Inter X99 LGA 2011 Gaming Motherboard with 2 NVME/6 SATA, 8 DDR4 RAM, RJ45 Gigabit Network Card
- RJ45 Slot: With rear 4 USB3.0, mainboard's gigabit network card keeps high-speed stable connection.(For more parameters, can see the detailed description).
- 8 DDR4 Memory Slot: Supports four generations of DDR4, mainboard is with eight memory slots, supports ordinary memory and ECC server memory..
- And NVME PCIE X4 channel m.2 high-speed hard disk theoretical bandwidth can be up to 4GB / S. (Advisors: If you have any questions, please feel free to contact us through Amazon, we will provide you with detailed and easy to understand answers).
- Plug and Play: Desktop motherboard installation is simple, which does not require particularly complicated operations..
- Motherboard Operation Test: After many inspections before leaving the factory, motherboard's quality is guaranteed, you can use it with confidence..
Check StockOfficial Creality Ender 5 Pro 3D Printer Upgrade Silent Mother Board Metal Feeder Extruder and Capricorn Bowden PTFE Tubing 220 x 220 x 300mm Build Volume
- Upgraded Silent Mainboard V4.2.2: Ender 5 Pro 3d printer comes with upgraded V4.2.2 silent Mainboard with TMC2208 drivers, allowing for quieter and....
- Metal Extruder Kit: Ender 5 Pro adopts Creality metal extruder which has better stronger pressure to pushing filament into printer nozzle, improving....
- Capricorn Premium XS Bowden Tubing: Imported Capricorn blue tube with high temperature resistant makes feeding smoother and ensure great printing....
- Brand Power Supply: Built-in brand power supply, heat up the hot bed to 110¡æ in 5 minutes..
- Semi-Assembled Kits: Ender 5 Pro comes with several partially assembled kits, very easy to assemble and allow you to learn about the basic....
Check StockCreality Sermoon D1 3D Printer Silent Motherboard Double Z-axis Sheet Metal Base 4.3-inch Touch Screen Large Printing Size 280 x 260 x 310mm
- Silent Mainboard&Excellent Extrusion Kit: Sermoon D1 equipped with self-developed 32 bit silent mainboard, which makes it possible to enjoy your....
- Industrial-grade Printing: Semi-closed chamber with sheet metal base features provides higher stability and a silent printing environment. Aluminum....
- Double Z-axis: Sermoon D1 use the double Z-axis design concept. By using double z-axis, T-type double screw rod, V-wheel synchronous component and....
- Convenient and smart: Sermoon D1 is endowed with 45 degree installed 4.3-inch Color Touch Screen, which makes it easy to view and operation. The....
- What you will get: A Ceality Sermoon D1 3D printer which combines perfect fusion of modern aesthetics and technological, lifetime technical....
Check StockEPOMAKER SKYLOONG SK64 64 Keys Hot Swappable Mechanical Keyboard with RGB Backlit PBT Keycaps Arrow Keys for Win/Mac/Gaming Gateron Optical Red Panda
- 60% Layout Hot Swappable Keyboard. As a 60% layout compact mechanical keyboard, the SK64 truly makes advantage of each inch to include four separate....
- IP6X Dustproof Mainboard, PBT Thermal Sublimation Keycaps. The mainboard is designed with IP6X dustproof design. No worries of dust on it. You are....
- 16 Million RGB Backlight. With backlighting that’s implemented with understated functionality for each key in mind, RGB has never been more elegant....
- Win+Mac Layout&Type C Interface. Press keys to easily switch between Windows and Mac layout, detailed Windows+Mac layout meets the needs of each user....
- N-Key Rollover and Anti-ghosting. NKRO is vital for gamers so SK64 is n-key rollover and anti-ghosting. You can register as many keys as you can press....
Check StockDEVMO Replacement Printhead Print Head Compatible with Ep-Son L800 L801 L805 R330 R290 R280 T50 TX650 PX650 RX610 RX690
- ★Replacement Printhead for L800 L801 L805 R330 R290 R280 T50 TX650 PX650 RX610 RX690.
- ★Please turn off the power of the printer, before installing this product or it will cause the mainboard chip to burn. After loading the print head,....
- ★If the original print head was broken and there was leaked ink, it's possible the mainboard burned, so please troubleshoot the problem of the....
- ★The printhead requires lots of attention. It is easy damage it if a non-professional replaces the printhead blindly. There is a regulation that....
- ★If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station or find professionals to....
Check StockCreality Official HALOT-ONE CL-60 Resin 3D Printer Integral Lighting Dual Cooling & Filtering System Easy Slicing LCD Resin 3D Printer 5 Monochrome LCD 2K Printing Size Halot One Red
- 【New Integral Light Source Structure】120W Power Super spotlight, 4000uw/m, The self-developed integral light source, Precision light control,The....
- 【Fast Printing&Multiple Application】HALOT-ONE is equipped with a 5.96-inch monochrome LCD with 2K HD resolution, and only needs 1-4 seconds per....
- 【5-inch Touchscreen and new user interface】Compared with other 3D printers in the market, HALOT-ONE is equipped with a larger 5-inch touchscreen,....
- 【High Performance Mainboard and Superb Image Processing Capabilities】The self-developed mainboard of a new generation boasts the main control chip....
- 【Efficient Cooling and Filtration】The ingenious Dual cooling systems allows the machine for quick heat release. The activated carbon air....
Check Stock
