Categories

Best Maintenance free Grooved Piping Systems

PannySewCraft Piping Sewing Machine Presser Foot - Fits All Low Shank Snap-On Singer, Brother, Babylock, Euro-Pro, Janome, Kenmore, White, Juki, New Home, Simplicity, Elna and More!

  • ►High Quality Premium Sewing Feet From TFBOY.
  • ►Provides Ease-of-Use for Tasks that Could be Extremely Tedious if Done by Hand.
  • ►Piping Presser Foot With 2 Grooved Holes,Make sure that the biggest thread/rope diameter under the grooved hole is within 5mm,Compatible With Brother,Janome,Singer....
  • ► Settings: Stitch width is suggested to be 0 with length at 1-3. Be sure to use the straight stitch in the CENTER position, otherwise, you will break your needle..
  • ► Pros: Makes a difficult job into a breeze! This particular presser foot will do either single or double piping which makes it a better buy than just the single piping presser feet..
Check Stock

VANICE Piping Sewing Machine Presser Foot - Fits All Low Shank Snap-On Singer, Brother, Babylock, Euro-Pro, Janome, Kenmore, White, Juki, New Home, Simplicity, Elna and More

  • Provides Ease-of-Use for Tasks that Could be Extremely Tedious if Done by Hand.
  • Piping Presser Foot With 2 Grooved Holes,Make sure that the biggest thread/rope diameter under the grooved hole is within 5mm,Compatible With Brother,Janome,Singer....
  • Settings: Stitch width is suggested to be 0 with length at 1-3. Be sure to use the straight stitch in the CENTER position, otherwise, you will break your needle..
  • High Quality Premium Sewing Feet From VANICE.
  • Pros: Makes a difficult job into a breeze! This particular presser foot will do either single or double piping which makes it a better buy than just the single piping presser feet..
Check Stock

QILIMA Aluminum Foil Tape, Professional Adhesive Aluminum Foil Tape for HVAC Pipe, Aluminum Repair Air Duct Tape - 2 Inch by 66 Feet (22 Yards)

  • 003cb003eADHESIVE TAPE:003cbr003e This foil tape with aggressive rubber adhesive sticks well to most surfaces. The vapor shielding tape also adheres to irregular surfaces, irrespective of the weather conditions..
  • 003cb003eEASY TO USE:003cbr003e Ideal for connecting and sealing insulation, maintenance, piping and piping.Very easy to use, good viscosity can be very easy to connect you want to glue pipe or metal joints or other things..
  • 003cb003ePREVENT GREASE AND TO CLEAN:003cbr003e Provides durable bonding at low and high temperatures, resisting flame, moisture/vapor, UV degradation, odor, weather, some chemicals and smoke transmission. Smooth surface can effectively reduce the adhesion of oil, only need..
  • 003cb003eGENERALLY APPLICABLE:003cbr003e Ideal for a variety of applications including general maintenance, sealing hot and cold air piping (excellent HVAC tape), pipe insulation systems, sealing aluminum, stainless steel and plastic joints/joints, temporary repair of metal surfaces, copper pipe fixing, etc..
  • 003cb003eAFTER-SALES GUARANTEE:003c/b003e We emphasize both high quality and leading after-sale customer service. We stand back at our product. Any issue, just contact us via e-mail through your buyer center to enjoy an efficient solution. 24 hours....
Check Stock

Piping Sewing Machine Presser Foot - Fits All Low Shank Snap-On Singer, Brother, Babylock, Euro-Pro, Janome, Kenmore, White, Juki, New Home, Simplicity, Elna and More

  • Piping Presser Foot With 2 Grooved Holes,Make sure that the biggest thread/rope diameter under the grooved hole is within 5mm..
  • Settings: Stitch width is suggested to be 0 with length at 1-3. Be sure to use the straight stitch in the CENTER position, otherwise, you will break your needle..
  • Pros: Makes a difficult job into a breeze! This particular presser foot will do either single or double piping which makes it a better buy than just the single piping presser feet..
  • Provides Ease-of-Use for Tasks that Could be Extremely Tedious if Done by Hand.
  • Fits All Low Shank Snap-On Singer* (Some Singers Require Low Shank Adapter), Babylock, Euro-Pro, Kenmore, White, Juki, New Home, Simplicity, Necchi and Elna Sewing Machines.
Check Stock

Midline Valve PVC Ball Valve Red T-Handle Water Shut-Off 3 in. Solvent Connections White Plastic (482T300)

  • ✔LEAK-FREE: Includes EPDM O-Rings and TPE Seats for a Secure, Leak-Free Seal.
  • ✔RED T-HANDLE: Enables Rapid and Safe Flow Control in Your Water Pipes.
  • ✔SPECIFICATIONS: Fits Both Sch. 40 and Sch. 80 Pipes.
  • ✔IDEAL FOR FLOW CONTROL IN: Landscaping Sprinklers, Pools, Water Park, Aquarium, ETC..
  • ✔PVC PIPING: PVC Piping Systems Feature Improved Performance, Increased Safety, and Better Rust and Corrosion Resistance when Compared with Steel Piping Systems.
Check Stock

HPS AST-138 6061 T6 Seamless Aluminum Round Straight Tubing, 16 Gauge, 1' Length, 1-3/8' OD, 0.065' Wall Thickness

  • Great for custom fabrication project such as DIY air intake, cooling systems and turbo intercooler piping setup.
  • Commonly used in industrial, automotive, marine and aerospace industry.
  • Great for custom fabrication project such as DIY air intake, cooling systems, turbo intercooler piping.
Check Stock

NDS WU-1000-S PVC Pipe Fitting, 1-Inch Slip Union, Schedule 40, EPDM O-ring, White

  • Great for high pressure applications: Use for any residential or commercial high-pressure water flow management needs.
  • It is perfect for indoor plumbing, outdoor irrigation and sprinkler systems, and piping for an above ground pool, hot tub, or spa.
  • Easy maintenance option: Unions are great to use when ease of service and maintenance for a pipe or ball valve is a priority.
  • Easier to use than a coupling to connect pipes, elbows, and other fittings.
  • Schedule 40 compliant: The WU-1000-S Slip Union can be used to create joints with schedule 40 pipe.
  • NSF certified: Drinking water safe and low lead approved.
  • Quality Construction: Made in the USA with quality polyone schedule 40 PVC ii material.
Check Stock

C447-020 2 CAP (SLIP)

  • PVC caps offer a quick, easy way to cap pipe ends, test pipes and clean-outs.
  • Compatible with cast iron, plastic, Copper, or schedule 40 steel piping.
  • May be used for non-pressure drain, waste, and vent (dwv) piping systems and sewer systems indoors and outdoors.
  • Conforms to CSA B602, certified and UPC approved, rated for underground use.
  • Flexible Connectors are leak-proof, rot-proof and sealed against infiltration and exfiltration,.
Check Stock

Jienk 5Pcs Bulkhead Union 3/8\ x 3/8\ Tube OD Push to Connect Tube Fitting, PMM-3/8 Pneumatic Quick Connect Air Fitting

  • 【Bulkhead Design】Pneumatic Fittings is mainly used for air piping, pneumatic tools, do not need joint tools can realize the pipeline connecting or disconnecting the link. Excellent choice for through wall application..
  • 【Durable】The body made of strong thermoplastic (PBT) housings and the ferrule adopts zinc alloy. Operating pressure 0~145 Psi, high pressure resistance, corrosion resistance and a long service life..
  • 【Push Lock】Quick connect fittings easy to install and remove. Just one touch to connect the tube. The release ring adopts ellipse design, removed conveniently..
  • 【Convenience】360°rotation. After installation, the tube direction can be changed easily. Help a lot with the alignment when piping the air line..
  • 【Application】Working temperature range: 32～140°F. Most commonly used in the field for low-pressure hydraulic and pneumatic systems such as Shop Air, General Industrial, Maintenance and Automotive Assembly, Aircraft Controls, Printing, Packaging and Textile. As well as moving parts such as air ride, air horns and air suspension system..
Check Stock

INTBUYING Hydroponic 10 Holes Grow Kit Plant Growing System for Leafy Vegetables Horizonal-2 Pipes 1 Layer

  • WATER TIGHT Rubber Grommets: in connections of DIY hydroponic systems, dutch buckets, dripping systems, siphon aquaponic systems and irrigation systems….
  • LEAK-FREE SEAL: Donut-shaped Rubber Grommets help transfer water or nutrient solution from one reservoir to another one with tubing and barded fittings or piping and 3/4 Inch Vinyl Tubing.
  • DURABLE: periodically replace worn old ones in existing hydroponic systems to ensure air and water tight seals in your hydroponic systems.
  • 3/4 inch Donut Rubber Grommet also goes with SCH40 1/2 inch PVC pipes or pipe's outer diameter matches grommet's inner diamete.
  • The inner diameter of rubber grommet is 3/4" but the drilled hole on the bucket it fits into will need to be 1-1/8 inch.
Check Stock

Rubber Flex Coupling Unparallel 1-1/2” x 1-1/4”, Black

  • COMPATIBILITY. Flexible Coupling Compatible with cast iron, plastic, copper, lead, and steel piping.
  • SIZE. 1-1/2” x 1-1/4” and Unparallel.
  • MARKING. Each Rubber Fitting is marked with part number, size, and certifications..
  • USED. May be used for non-pressure drain, waste, and vent (DWV) piping systems and sewer systems indoors and outdoors..
  • CONVINIENCE. A pair of hose clamps included. No need to use adhesives or tapes for connection..
Check Stock

Rubber Flex Coupling Parallel 2” Tubular x 2\ Tubular

  • FLEXIBLE RUBBER. Flexible rubber parallel coupling that fits with steel piping, copper, cast iron, plastic, copper and lead..
  • HIGHLY DURABLE. Sealed leak-proof flexible connectors with stainless steel clamps that will last.
  • MANY APPLICATIONS. Applications include non-pressure drain, waste, and vent piping systems and sewer systems indoors and outdoors.
  • CERTIFIED AND UPC APPROVED. Conforms to ASTM C1173, CSA B602, Certified and UPC Approved, Rated for underground use..
Check Stock

Rubber Flexible Coupling Parallel 1-1/2 inch x 1-1/2 inch

  • Flexible rubber parallel coupling that fits with steel piping, copper, cast iron, plastic, copper and lead.
  • Applications include non-pressure drain, waste, and vent piping systems and sewer systems indoors and outdoors.
  • Sealed leak-proof flexible connectors with stainless steel clamps that will last.
  • Double fitting size: 1-1/2” x 1-1/2”.
  • Conforms to ASTM C1173, CSA B602, Certified and UPC Approved, Rated for underground use.
Check Stock