Categories

Best Maize Milling Equipment

Mega Mini R8 Milling Machine, the only True Inch machine on the market, .50 inch-per-turn table feed screw, a powerful brushless 500W motor

  • X-Axis Power Feed: The X-Axis power table feed is made of sturdy aluminum material. It is also designed with a handle, buttons, and knobs for simple operation. Voltage: 110V, 60Hz. Revolution Speed: 0-200 RPM. High quality and efficiency to handle all your milling needs..
  • Long Service Life: The power feed for the milling machine features a smooth and strengthened polished surface, which is waterproof, dustproof, and oilproof. That ensures a long service life in harsh working conditions..
  • High Efficiency & Precision: The x-axis power feed is equipped with spiral bevel gears for rapid control. There are bearings to achieve high efficiency and precision as well..
  • Low Noise & Easy Operation: The milling machine power feed features 9 levels of moving speeds, set by the rotary knob on the side. Moreover, it makes little noise when used, an essential piece of equipment for every workshop..
  • Wide Compatibility: This milling table power feed fits multiple vertical knee-type mills with the same mounting pattern and a 5/8" diameter shaft on the end. Such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc..
Check Stock

BestEquip Rotary Table 4inch/100mm Horizontal Vertical Rotary Table 4-Slot Rotary Table for Milling Machine Rotary Table for Milling 360 Degrees Precision Rotary Table

  • 4" Vertical & Horizontal Design: Our rotary table for milling machine is 4"/100mm with 4 slot can be used in both horizontal and vertical....
  • Remarkable Quality: HT200 Casting is mainly used to cast parts subjected to pressure and vibration on mechanical equipment, offering rotary table for....
  • Excellent Precision: The precision rotary table' indexing plate can be graduated 360 Degrees. Resetting dial and hand wheel can be graduated in....
  • Convenient To Adjust: The dial is marked with an accurate scale. Just operate the control handle and adjust it to the desired position, which makes it....
  • Multiple Application: With free wrench and set of screws, the power milling machines are widely used in mini milling machine like index boring,....
Check Stock

JIANXING 4mm 5mm 6mm Carbide Square End Mill Set,4 Flute Cutting Tools,HRC 55 Deg,Tialn Coating，Straight Shank Square Nose End Mills Cutter,CNC Router Bits,Widely Used in Alloy Steels/Hardened Steels(1 Set)

  • 【Cnc 4-Flute End Mill 】Adopt Modern Grinding Machine Equipment For High-Precision Grinding. Resists Wear And Offers High Cutting Performance.
  • 【Material】: Carbide With Tialn Coating For HRC 55 Deg, The Tialn Coating Has Stable Performance And Is Not Easy To Wear Under High Temperature Environment. It Has Higher Hardness And Wear Resistance And Excellent Cutting Performance.
  • 【The 35 degree helix angle design】 Greatly Improves The Production Efficiency, Sharp And Durable, Convenient For Chip Removal.
  • 【Applicable materials】 Include Ordinary Steel, Carbon Steel, Alloy Steel, Hardened Steel, Cast Iron, Etc. The End Milling Cutter Bit Is Suitable For Plane / Side Milling, U-Groove Milling And Other Additive Methods..
  • 【Package Included】: 1set (4mm+5mm+6mm) Carbide End Mill.
Check Stock

ele ELEOPTION Metal Mini Milling Machine DIY Tool Benchtop Wood Lathe Woodworking for Hobby Science Education Modelmaking AC100V~240V

  • 【Application】 Juvenile Activity Center, School General Technical Room, Science and Technology Activity Room Equipment, Science and Technology....
  • 【Material 】Milling Machine Made of advanced aluminum alloy, durable and non-deformable for usage. The Milling is suitable for mini drill and drill....
  • 【Processing Materials】 Wood, Plastic, Aluminum, Copper and other Soft Metal,CAN'T Processing Alloy.When processing harder materials, the feed rate....
  • 【Main parts】 The main components of the headstock, intermediate block, connecting block, vice, large slider, small slider, hand wheel, base and so....
  • Note: Please check the product description carefully, if you have more questions or don't sure about your needs, please contact with our service....
Check Stock

Clabber Girl, Corn Starch, 3.5lb

  • Corn starch or maize starch is the starch derived from the corn (maize) grain. The starch is obtained from the endosperm of the corn.
  • In the kitchen, cornstarch is most often used as a thickening agent for sauces, gravies, glazes, soups, casseroles, pies, and other desserts..
  • It is an excellent gluten-free alternative to flour thickeners in recipes..
  • It is versatile, easily modified, and finds many uses in industry as adhesives, in paper products, as an anti-sticking agent, and textile manufacturing. It has medical uses, such as to supply glucose for people.
  • Cornstarch can also be used to coat fruit in pies, tarts, and other desserts before baking. The thin layer of cornstarch mixes with the fruits' juices and then thickens as it bakes. This prevents pies and other desserts from having a watery or runny texture..
Check Stock

4D Concepts Farmington 3 Tier Folding Weave/Black Iron Shelf Decorative Bookcase

  • This is a wonderful Farmington three tier maize bookcase that is a great bookcase for the kitchen, bathroom or any room in your home. The hand crafted maize husk rectangle shaped shelves are woven over a metal frame to give it the strength needed to support books, pictures, etc. The sculpted metal top and sides of the bookcase give this item a designer look without the designer price. The slotted metal back gives this item a great look as well as offering strength to the unit.
  • 3 shelves made of woven corn husk on a metal frame.
  • Decorative metal frame with scrolled metal.
  • Metal is finished in a rich black paint and wicker is finished in brown color..
Check Stock

Mead Notebook, 1 Subject, College Ruled Paper, 80 Sheets, 11\ x 8-1/2\

  • Stay organized while protecting the planet with a notebook that is made with 100% recycled materials.
  • The 80 college ruled sheets are double-sided for plenty of notetaking space. Pages are perforated so they easily tear out with clean edges..
  • Notebook is 3-hole punched for storage in your favorite binder. Nylon coated, twin wire binding will not snag and resists uncoiling to keep your notes together..
  • This product is made with 100% Recycled Fiber, including 30% post-consumer waste. Notebook covers are made of paper..
  • Sheets measure 11" x 8-1/2" when torn out. Overall size of 11" x 9-1/8". Available in assorted colors: Ginger, Terra Cotta, Maize, Indigo, Moss, Stone..
  • Assorted Colors: Ginger, Terra Cota, Maize, Indigo, Moss, and Stone.
Check Stock

VERTEX 3012-8110 3 Gallon Coolant Pump Kit 120V/1PhaSE

  • Portable and easy to use coolant device..
  • Can be used on drilling, milling machines, small lathes and other equipment that needs cooling..
Check Stock

Milling Cutter, 3.175x2x17mm Straight Shank Engraving Good Durability Spiral Milling Cutter Tungsten Steel Milling Cutter Milling Cutter Single for Repair Tool

  • Made of tungsten steel material, with high hardness and strength, wear resistance and corrosion resistance..
  • The milling cutter is a single‑flute spiral milling cutter with fast processing speed and good chip removal effect..
  • The blade adopts mirror grinding technology, the appearance is not rough, and the milling is glossy..
  • The milling cutter is mainly used for plane milling, notch milling, step face milling and profiling milling..
  • The kit contains 5 spiral milling cutters, with standard size, often used in CNC engraving machine..
Check Stock

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

  • Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
  • High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
  • Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
  • High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
  • Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

Aopin Forstner Drill Bits Professional Carbide Woodworking Hole Saw, Cutting Diameter 22mm, 2Pcs (Blue, Silver)

  • Applications: Can be used for drilling holes on wood and wood products perforation, plastic products, furniture, door hinge..
  • Features: Special heat treatment, cemented carbide. Arc design optimizes chip removal. two blade cutter head, Low cutting resistance. the design of the Forstner drill center point can precise positioning without slipping, sturdy round handle..
  • Instructions: Suitable for hand-held electric drills, portable percussion drills, CNC equipment, engraving machines, bench drills, vertical drilling machines, and other woodworking milling and drilling equipment..
  • Package Content: 2 x Carbide Forstner Bits..
Check Stock

ASZLBYM 11pcs RPMT10T3 MOE R5 Indexable Carbide Milling Inserts Blade Milling Cutter with 5/8\/16mm SRDPN1616H10 Indexable Carbide Milling Tool Holder Metal Lathe Cutting Tools

  • PACKAGE INCLUDES : You will receive 1pc SRDPN1616H10 5/8”/16mm shank diameter carbide lathe milling tool holder , 11pcs RPMT10T3 MOE indexable carbide milling inserts cutters and 1pc T15 wrench..
  • Material : The SRDPN1616H10 5/8" lathe milling tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The RPMT10T3 MOE indexable milling inserts cutter material is carbide, and the coating is CVD Al2O3 TICN, It has good toughness, wear resistance and high temperature resistance, the milling insert can be used for milling cast iron, steel parts and stainless steel..
  • Milling tool holder cutter size : Shank Diameter ( length×width ) : 5/8"*5/8"(16mm*16mm).
  • RPMT10T3 MOE carbide milling insert size : Insert Style : RPMT , thickness: 0.156" ≈ 3.97mm , diameter : 0.393≈ 10mm, P=11° degree..
  • Easy to store: the milling tool holder and carbide milling inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.
Check Stock

BAP400R-50-22-4T Milling Cutter NT40-FMB22 Collet Chuck Holder Indexable End Mill APMT1604 Carbide Inserts for Milling Machines (#1)

  • Adopted New Coating Technology: New coating technology is adopted on the surface, which has good oxidation resistance and high temperature resistance, it can be used for a long time.
  • BAP400R Right-angle Milling Cutter: BAP400R right-angle milling cutter reduces blade wear and saves processing costs.
  • Fast Milling: Fast milling, screw off-position fastening designed, make the Milling Inserts and cutter fit tightly.
  • High Working Performance: This is a high precision Milling Cutter , strong rigidity, good processing effect.
  • High Hardness: The milling cutter is made of high quality material, high hardness with good impact resistance.
Check Stock