Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

  • ✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....
Check Stock

Sabre Tools 1/2 Inch x 18 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (1/2\ x 16\ x 18\)

  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills.
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/an....
Check Stock

Makita 2 Piece - 3.25\ HSS Planer Blades for 3.25\ Planers - Fast Cutting for Hard Wood

  • 2 Makita 3.25" High Speed Steel (HSS) Planer Blades For Planning Hard Wood on Makita 3.25” Planers, such as KP0800K, KP0810, XPK01Z, XPK02Z & N1900B & ALL 3.25” Planers | Ideally Suited For Squaring & Framing.
  • CUT FASTER & LONGER with Makita's Double edged blade design featuring a High Speed Steel construction that's indefinitely Resharpenable for continued use on Hard Wood.
  • Optimized for use Makita 3.25" Planers & compatible with all 3.25" Planers, these blades are Ideal for heavy construction planning applications, squaring, framing, and wood finish work..
Check Stock

Khanka Hard Battery Storage Box Holder Carrying Case Replacement for Makita 12V 18V 40V Battery and Charger - Holds 12V 18V 40V 2.0/2.5/3.0/4.0/5.0/6.0-Ah Battery Charger Case Only

  • Tool battery organizer, designed for 12v/18v/40v battery and charger case, this battery organizer is suitable for makita 12v/18v/40v (BL1021B BL1041B....
  • The hard case is suitable for different sizes of makita battery and contains 9 removable dividers for free DIY storage space inside the hard case,....
  • This hard case replacement for makita batteries 18v lithium ion is made of high quality EVA material, shockproof, dustproof and waterproof, protect....
  • The hard shell can ensure your makita battery is safe and convenient, with light weight. The classic zipper design makes it easy to open and close..
  • Note: Only case is sold, makita battery and charger are not included.
Check Stock

Power Wheels Adapter for Makita 18V battery Dock Power,Makita 18V Dock Power Adapter with 12 Gauge Wire,Good Power Convertor for DIY Ride On Fan Truck Robotics RC Toys and Work Lights

  • Fully Applicable: 100% compatible with Makita 18v, our battery power connector fits your battery perfectly, and you can easily install and lock your....
  • Good Quality: Makita 18v battery dock adapter was made of good ABS plastic. Strong,Heat resistant,impact resistance,moisture resistance..
  • Easy to install: Makita 18V battery adapter can lock your battery well. Just move the power installation connector gently to the inside of the groove,....
  • Creativity & Entertainment: Power Wheel Adapter has installed 12 gauge wire.Enjoy yourself in DIY! Good Power Convertor for DIY Ride On Fan, Truck,....
  • Warning: Work with Makita 18v Li-ion Battery Only.Please check if it fits your battery before buying.Compatible with Makita BL1830 BL1840 BL1850....
Check Stock

Makita 162258-0 Vibration-Proof Side Handle

  • Compatible with Makita Power Tool Models 9031, 9501B, 9503BH, 9505BH, 6000LR, 9558NB, 9558PB, 9557PB, 9553NB, DA3010F, 9523NBH, N9501BZ, 9227CY (NOT Included).
  • Please Reference Tool Diagram to Ensure Part Compatibility.
  • Included: (2) Makita Handle Grips (Model #153489-2)(Part Only - Tools NOT Included).
Check Stock

Makita 161374-5 Replacement Reciprocating Saw Shoe for XRJ05Z

  • Fits the Makita XRJ05 Reciprocating Saw (Not Included).
  • Included: (1) Makita Replacement Reciprocating Saw Shoe (Tool NOT Included).
Check Stock

Makita 2 Pack - 4.5” Turbo Diamond Blades For Grinders & Circular Saws - Ultra-Fast Cutting For Concrete, Masonry & Brick - 5/8”, 20mm & 7/8” Arbors

  • ✅ 2 Makita 4-1/2” Premium Diamond Turbo Blades For FAST Concrete, Cinder Block & Brick Cutting | 4 1/2" x 0.79 x 7/8-Inch Arbor, Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
  • ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry.
  • ✅ QUICKLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makita’s Premium High Quality Industrial Diamonds with Makita’s proprietary bond that allows for optimal diamond exposure-to-bond wear ratio for accurate cutting PERFORMANCE, HIGHER TEMPERATURE RESISTANCE & STABILITY, cutting longer and faster than other blades in its class.
  • ✅ AVOID BLADEWEAR & Slow Downs with lower priced blades by relying on Makita’s proprietary matrix bond, allowing for fast, accurate and continuous cutting PERFORMANCE, PRECISION, LONGEVI....
Check Stock

Makita 2 Pack - 4.5” Segmented Rim Diamond Blades For 4.5”+ Grinders & Circular Saws - Long-Lasting Cutting For Concrete, Masonry & Brick - 5/8”, 20mm & 7/8” Arbors

  • ✅ 2 Makita 4-1/2” Premium Segmented Diamond Blades For Long-Lasting & Reliable 1.25” Depth Concrete, Cinder Block & Brick CUTTING | 4 1/2" x 0.79 x 7/8-Inch Arbor, Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
  • ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry.
  • ✅ RELIABLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makita’s Premium High Quality Industrial Diamonds, and Makita’s proprietary industry leading bond matrix that allows for optimal diamond exposure-to-bond wear ratio for accurate cutting PERFORMANCE, HIGHER TEMPERATURE RESISTANCE & STABILITY, cutting longer and faster than other blades in its class.
  • ✅ AVOID BLADE WARPAGE, Premature Wear and slow down periods with lower priced blades by relying on Makita’s advanced air flo....
Check Stock

Podoy Angle Grinder Outer Lock Nut for Compatible with Makita Dewalt Milwaukee Bosch Black & Decker Ryobi 5/8 -11 Fits All 4-1/2 4 Pack

  • For Compatible with Makita:Angle Grinder 9565CV Angle Grinder 9564CV Angle Grinder 9029 Grinder 9069 Angle Grinder 9016DB Angle Grinder 9047L Angle....
  • For Compatible with Makita: 9005BZ Grinder 9015B Grinder 9505BH Grinder 9527PB Grinder 9527NB Angle Grinder 9015DB Angle Grinder 9561CV Angle Grinder....
  • For Compatible with Makita 224399-1, 193465-4, 224568-4 parts. Compatible List is provided below for reference,Outer Nut Size: 5/8"-11,fits all....
  • Package include :4 pcs outer angle grinder flange nuts.
  • Non original aftermarket part,The part/product is not sponsored or endorsed by,or affiliated with the brands it fit,including Makita Dewalt Milwaukee....
Check Stock

Makita 10 Pack - 4 Inch Cut Off Wheels For 4' Grinders - Aggressive Cutting For Metal & Stainless Steel

  • ✅ 10 MAKITA Premium 4” Flat Type 1 Cut Off Wheels for Metal & Stainless Steel (INOX) | Wheel Dimensions: 4-Inch x .045-Inch x 5/8-Inch | Optimized for Makita 4 Inch Angle Grinders and compatible with All 4” Angle Grinders.
  • ✅ CUT 2-3X More than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup.
  • ✅ QUICKLY & Effortlessly Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita’s High-performance aluminum oxide grain and proprietary hard bond matrix.
  • ✅ AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Makita’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION, LONGEVITY, ....
Check Stock

Makita 2 Piece - 4.5” Turbo & Segmented Diamond Blade Set For 4.5”+ Grinders & Circular Saws - Ultra-Fast & Lasting Cutting For Concrete, Masonry & Brick - 5/8”, 20mm & 7/8” Arbors

  • ✅ 2 Makita 4-1/2” Premium Segmented + Turbo Rim Diamond Blades For FAST & RELIABLE Concrete, Cinder Block & Brick Cutting | 4 1/2" x 0.79 x 7/8-Inch Arbor, Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
  • ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry.
  • ✅ 1 SEGMENTED Steel disc is ideal for safe and continuous use with minimal warpage risk due to its advanced air flow cooling technology | RELIABLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makita’s Premium High Quality Industrial Diamonds, and Makita’s proprietary industry leading bond matrix that allows for optimal diamond exposure-to-bond wear ratio.
  • ✅ 1 TURBO Steel disc is ideal for quicker and faster cuts in Concrete & Masonry | AVOID BLADEWEAR & Slow Downs with lower priced blade....
Check Stock

Makita 5 Pack - 4.5" Grinding Wheel For Grinders - Aggressive Grinding For Metal - 4-1/2 x 1/4 x 7/8-Inch

  • ✅ 5 MAKITA Premium 4-1/2” Depressed Grinding Wheels for Metal | 4-1/2-Inch x 1/4-Inch x 7/8-Inch | Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
  • ✅ GRIND 2-3X MORE than lower quality & cost wheels due to this wheel’s carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide balanced Grind Life, Stock Removal Rate, Precision, Power Demands & Heat Buildup, allowing you to grind longer, consistently precise with maximal wheel integrity, moderate power demands and relatively low heat buildup.
  • ✅ EASILY & SMOOTHLY GRIND all steel and metal including welds, carbon steel, structural steel, iron, steel pipes and alloy steel over an extra-long life span due to Makita’s High-performance Brown fused Aluminum Grain and hard bond matrix | Synthetic Resinoid Bond is ideal for fast stock removal, high operating speeds and aggressive grinding action used by professional metal fabrication, auto shops, maintenance repair, construction & general industrial applications.
  • ✅ AVOID Premature Disintegration, Wheel Shatter, & Injury with lower priced wheels by relying on Makita’s proprietary strong bond matrix that binds Premium White Aluminum Ox....
Check Stock