Categories

Best Male Header

CZH-LABS DIN Rail Mount DSUB DB50 Male/Female Header Interface Module D-SUB Breakout Board.

  • Standard DB50 Male/Female header connectors. Male header, female header and screw terminal 1:1:1 connects for per line..
  • Rated voltage: 60V. Rated current: 1A / per pin. Operating Temperature: -20ºC to 50ºC.
  • Terminal block: Pitch 3.81mm/0.15" miniaturization screw terminal block. Wire range - 26-16AWG. Strip length - 5mm. Screws - M2,steel,Cr3+ Zn plated.....
  • FR-4 fiber glass PCB, dual copper layers..
  • High quality fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the....
Check Stock

MEIRIYFA USB Header Extension Cable, USB 2.0 9-Pin Male to 9-Pin Female Internal Motherboard Header Cable for USB Ports, Expansion Cards and Motherboard Ports 20.3 inches（2 Pack)

  • 【Applicability】: USB 2.0 9-pin male to 9-pin female internal motherboard header cable, jumper to reduce and eliminate stress on rear USB expansion board or front panel USB ports as well as expansion card and motherboard port connections..
  • 【Extendibility】: The USB 2.0 header extension cable extends your 9-pin USB IDC motherboard header cable length by 20.3inch/515mm, which is more convenient and efficient..
  • 【How to use】: Connect the motherboard USB 9-pin header port to the 9-pin front panel of the PC case. USB enclosure to motherboard header cable, USB internal header cable, USB header cable..
  • 【Safety】: The 9-pin USB 2.0 header protects against short circuit socket design, which can prevent the risk of accidental removal of the circuit board, pins and case short circuit..
  • 【Material】: The 9-pin jumper has a flexible PVC sheath, which is flexible and environmentally friendly, which greatly improves its durability and life..
Check Stock

360 Pieces Multicolored Breadboard Jumper Wire Dupont Wire Ribbon Cables Kit 30CM 20CM 10CM 40 Pin Male to Female, 40 Pin Male to Male, 40 Pin Female to Female, for Arduino and Raspberry Pi

  • EASY-TO-USAGE: The 10 colour repeat clear carrier colour coded 40 PIN ribbon cable, easy to identify each wires in your DIY or prototype.
  • 2.54 Pitch Male or female connector at end of each wires, will easy to support different connection: bread board hole, pin header, female header or other connectors with different pins..
  • WIDE USEAGE: For Use In Development and Prototyping with Arduino, Raspberry Pi, Single Board Computers, Electronics Modules, LoveRPi Kits, and more.
  • PREMIUM QUALITY: We use qualified copper tinned & PVC insulation to manufacture these high-quality cables. It provides a simple, quick and cost-effective solution to mass termination. They also have space and weight saving advantages over other wiring methods and are ideal for use on computers, peripherals, and interface units, audio and digital equipment..
  • MULTIPLE MODEL: This Jump Wire Set includes totally 360 wires to support multiple usage, include three kinds of wires length: 30.5cm/12.0in.
  • 10.4cm/4.0in. Three end connectors: Female to Male, Male to Male, Female to Female..
Check Stock

Miuzei PCB Board Prototype Kit for Electronic Projects Circuit Solder Double-Side Board with 40 Pin 2.54 mm Male to Female Headers Connector 2P&3P Screw Terminal Block Solder Flux Solder Wire

  • ⭐【6 Different Sizes PCB Boards】Double Sided Prototype PCB Boards--1 × 9*7cm, 2 × 8*6cm, 5 × 8*2cm and 5× 7*5cm, 5 × 7*3cm, 5 × 5*4cm PCB....
  • ⭐【Convenient for Projects】The upgrate 0.8mm....
  • ⭐【Header Connector】6 pcs 40 pin Male Header, 4 pcs 40 pin Pitch Right Angle Male Headers, 6 pcs 40 Pin Female Header.
  • ⭐【Screw Terminal Block】8 Pcs Screw Terminal Block: 6 pcs 5.08-301-2P and 6 pcs 5.08-301-3P.
  • Pitch: 5.08mm, Rated Voltage: 300V, Rated Current:....
  • ⭐【High Quality & Warranty】Durable Glass Fiber-FR4 Material (Thickness 1.6mm) is A Very Solid and Durable Prototype Circuit Board.
Check Stock

MEGA 2560 Starter Kit Ultra (100% Arduino IDE Compatible) w/ Battery Holder, Sensors, Modules, Resistor kit and Components (no Supply)

  • ...egister (Series to Parallel IC) 74HC595 - NPN Transistor BC547 - PNP Transistor BC557 - Adjustable Knob Resistor 1kOhm (Potentiometer) - Adjustable Knob Resistor 10kOhm (Potentiometer).
  • - Resistor Pack 1/4W 1% accuracy, with 10pz of each value: 100, 220, 330, 470, 1K, 2K2, 4k7, 10K, 22K, 47K, 100K, 220K, 1M - 40-pin header 2.54 mm -40-pin header at right angle 2.54mm -5 * Capacitors for bypass tantalum 0.1uF -5 * Jumpers for header.
Check Stock

Wishiot 5pcs MPU-6050 Acceleration Sensor 6dof Three-Axis Accelerometer Gyro Sensor IMU with 1pc 40Pin Male Header and 1pc 40Pin Male to Female Dupont Cable for Arduino RC Quadcopter Drone

  • Communication modes: standard IIC communication protocol.
  • Use the chip: MPU-6050, Power supply: 3V-5V.
  • DIY your own project and display the MPU-6050 Sensor Readings on oled via connecting it with R3 MCU Board or NodeMCU ESP32 Devkit.(oled display, R3 MCU board or ESP32 Devkit, breadboards not included in this listing).
  • What you will get: 5pcs MPU-6050 Accelerometer Gyro Sensor with 5pcs 8Pin Straight Pin Header and 5pcs 8P Bend Pin Header, 1pc 40P Female to Male Dupont Cable, 1pc 40P Male Pin Header..
  • How to email us? Please click “WISHIOT”(you can find Sold by WISHIOT under Buy Now button), in the new page, click “Ask a question” to email us.
Check Stock

Smraza 100pcs Double Sided PCB Board Kit, Prototype Boards for DIY Soldering and Electronic Project Circuit Boards Compatible with Arduino Kits, 30PCS 40 Pin 2.54mm Male and Female Header Connector

  • Selection of Multi-Sized Proto Boards - 30 pieces double-sided prototype boards of 4 different size to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects. （10 pieces 2*8cm, 10 pieces 3*7cm, 5 pieces 4*6cm and 5 pieces 5*7cm PCB boards.
  • Header Connector - 10 pieces 40 pin male header, 10 pieces 40 pin pitch right angle male headers, 10 pieces 40 pin female header.
  • pitch: 2.54mm, single row and straight connector.
  • Screw Terminal Block - 5 pieces 5.08-301-2P and 5 pieces 5.08-301-3P.
  • pitch: 5.08mm, rated voltage: 300V, rated current: 16A..
  • Jumper caps - 30 pieces standard 2.54mm pin spacing circuit board jumper cap in 6 colors, 5 pieces per color..
  • Environmental and Elegant Packaging - Compact paper package take little footprint..
Check Stock

USB Front Panel Adapter, JoyReken Vertical USB C Header Adapter, USB 3.1 Type-E Key-A to USB 3.0 20Pin Header Converter for Type C Motherboard

  • Supports all motherboards with USB 3.0/ 3.1 19-pin header.
  • Motherboard: USB 3.0 Internal 19 Pin MB Male Housing Header.
  • Front Panel: USB 3.1 A-Key 20 Pin Front Panel Female Header / NOTE: Does not convert from 5GB/s to 10GB/s.
  • Easy way to access USB-C and support front panel header, doesn't require to have latest motherboard to experience USB-C technology..
  • ** Note on USB current over limit issue: The power from the USB 3.0 header on the motherboard has a power rating at 4.5W (0.9A x 5V). However, many USB-C devices can withdraw power up to 100W (20A x 5V). This may result in a power shut down to protect the motherboard and its components..
Check Stock

Vilros 40 Pin GPIO Solderless Hammer in Header for Raspberry Pi Zero, Zero W, Zero W 2 (Header Only)

  • 40 Pin Male Hammer-In Header Intended for use with the Vilros Raspberry Pi Zero Hammer Header Install Rig.
Check Stock

9pin USB Header Male 1 to 2 Female Extension Splitter Cable Connector Adapter Male 1 to 2 Female

  • This listing is for 1pc multiplier, One connect to motherboard 9pin(10pin) port, Split to 2x 9-Pin(10-pin).
  • Connector(s) B: 2X 9Pin USB Header Female.
Check Stock

risingsaplings TCS34725 RGB Color Sensor Colour Recognition Module RGB IIC Development Board with IR Filter and White LED for Arduino STM32

  • come with 7 Pin male pin header and right angel pin header.
Check Stock

risingsaplings Rpi Pi GPIO Breakout Board 3 Types Output Terminal Block Module for Raspberry Pi 2 3 4 Zero

  • The module has been soldered and assembled. Support for Raspberry Pi 2 3 4 Zero..
  • 3 Type Output: Male Pin Header, Female Pin Header and Terminal Blocks..
  • With 4pcs double-screw bolts and 8pcs screws. (Noted: the module not included Raspberry Pi Board)..
Check Stock

OBD-II Breakout Diagnostic Box, OBD2 Pinout Tester Detector

  • The OBD-II breakout box with male and female header connectors, so that this breakout box can be placed between the vehicle and the diagnosis tool. Very handy if you want to measure CAN bus signals..
  • To provide quick access to all 16 pin connections during repair and diagnosis of the vehicle..
  • OBD-II breakout header cable length 420mm/16", to facilitate plugging in equipment..
  • Standard 4mm banana sockets. The five color sockets correspond to different pinouts, which is convenient for you to identify pinouts with different functions..
Check Stock