Categories

Best Male Threaded Elbow

Eaton Aeroquip 2024-2-4S 90 Degree Male Elbow JIC 37 Degree & NPT End Types Carbon Steel 1/4 JIC m x 1/8 NPT m End Size 1/4 Tube OD 1/8 Male Pipe Size Pack of 4

  • 90-degree male Joint Industry Council (JIC) elbow to connect to an National Pipe Thread (NPT) female thread at a 90-degree angle.
  • Male JIC threads on one end and male NPT threads on the other end for connecting two different threaded ends.
  • Carbon steel for tensile strength and hardness.
  • Standard duty for light to medium pressure applications.
  • Society of Automotive Engineers (SAE)-compliant for SAE standards J512, J513, J514, J1926 and J1453 for functional requirements.
Check Stock

Anderson Metals 50065 Brass Compression Tube Fitting 90 Degree Elbow 3/8 x 3/8 Tube OD,50065-06

  • 90-degree elbow for connecting two tubes at an angle.
  • Female compression tube fitting for connecting to male threaded pipes.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperature range of -65 to 250 degrees F.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Eaton Aeroquip 2043-6-6S 90 Degree Bulkhead Union Elbow JIC 37 Degree End Types Carbon Steel 3/8 JIC m End Size 3/8 Tube OD

  • Bulkhead 45-degree elbow to connect two tubes through a panel and change tube direction by 45 degrees.
  • Male JIC threads at both ends for connecting two threaded tubes.
  • Carbon steel for tensile strength and hardness.
  • Standard duty for light to medium pressure applications.
  • Society of Automotive Engineers (SAE)-compliant for SAE standards J512, J513, J514, J1926 and J1453 for functional requirements.
Check Stock

HangTon SD20 3 Pin Connector Quick Disconnect Waterproof IP68 Right Angle Cable Plug Panel Mount Socket, 25 Amp Power 14 AWG Wire

  • 3 pin panel mount socket and 90-degree angle male plug, any direction elbow.
  • Cable outer diameter range: 8-12mm, Wire Size: ≤4mm² or 12AWG 14 AWG, Contact Diameter: Φ2.8mm. Rated Voltage/Current : AC 380V/25A, Resistance: 1mΩ.
  • Protected against solids & liquids, provide a secure and reliable connection in the harsh environment.
  • Waterproof IP68, plastic shell, threaded coupling, panel mount, quick disconnect, solder, angled cable plug & panel mount socket.
Check Stock

uxcell Push to Connect Tube Fitting Male Elbow 4mm Tube OD X 1/8NPT Thread Pneumatic Air Push Fit Lock Fitting

  • 【UNIVERSAL DESIGN】- Product Name : Elbow Push to Connect Fitting.
  • Type: 90 Deg Swivel Elbow Male Connector.
  • Tube and Thread Size : 4mm OD x 1/8" NPT Male.
  • Operating temperature：-10 - 60 Degree Celsius.
  • 【GOOD DESIGN】- Push-to-connect tube connection on one end and male threads on the other end. A good release cap can withstand greater and stronger pressure without tripping..
  • 【ADVANTAGE】-Have abrasion resistance, light weight, and resistance to crushing and cracking,Compressive and corrosion resistant, good sealing performance and long service life..
  • 【APPLICATION】- Elbow Air Fitting has Quick and simple installation,designed for using to connect with polyethylene, nylon and PU tubing..
Check Stock

uxcell Push to Connect Tube Fitting Male Elbow 6mm Tube OD x M5 Thread Pneumatic Air Push Fit Lock Fitting Blue 5pcs

  • 【UNIVERSAL DESIGN】- Product Name : Elbow Push to Connect Fitting.
  • Type: 90 Deg Swivel Elbow Male Connector.
  • Operating temperature：-10 - 60 Degree Celsius.
  • 【GOOD DESIGN】- Push-to-connect tube connection on one end and male G threads on the other end. A good release cap can withstand greater and stronger pressure without tripping..
  • 【ADVANTAGE】-Have abrasion resistance, light weight, and resistance to crushing and cracking,Compressive and corrosion resistant, good sealing performance and long service life..
  • 【APPLICATION】- Elbow Air Fitting has Quick and simple installation,designed for using to connect with polyethylene, nylon and PU tubing..
Check Stock

uxcell Push to Connect Tube Fitting Male Elbow 4mm Tube OD x M5 Thread Pneumatic Air Push Fit Lock Fitting Blue 2pcs

  • 【UNIVERSAL DESIGN】- Product Name : Elbow Push to Connect Fitting.
  • Type: 90 Deg Swivel Elbow Male Connector.
  • Operating temperature：-10 - 60 Degree Celsius.
  • 【GOOD DESIGN】- Push-to-connect tube connection on one end and male G threads on the other end. A good release cap can withstand greater and stronger pressure without tripping..
  • 【ADVANTAGE】-Have abrasion resistance, light weight, and resistance to crushing and cracking,Compressive and corrosion resistant, good sealing performance and long service life..
  • 【APPLICATION】- Elbow Air Fitting has Quick and simple installation,designed for using to connect with polyethylene, nylon and PU tubing..
Check Stock

uxcell Push to Connect Tube Fitting Male Elbow 12mm Tube OD X 1/4NPT Thread Pneumatic Air Push Fit Lock Fitting 2pcs

  • 【UNIVERSAL DESIGN】- Product Name : Elbow Push to Connect Fitting.
  • Type: 90 Deg Swivel Elbow Male Connector.
  • Tube and Thread Size : 12mm OD x 1/4" NPT Male.
  • Operating temperature：-10 - 60 Degree Celsius.
  • 【GOOD DESIGN】- Push-to-connect tube connection on one end and male threads on the other end. A good release cap can withstand greater and stronger pressure without tripping..
  • 【ADVANTAGE】-Have abrasion resistance, light weight, and resistance to crushing and cracking,Compressive and corrosion resistant, good sealing performance and long service life..
  • 【APPLICATION】- Elbow Air Fitting has Quick and simple installation,designed for using to connect with polyethylene, nylon and PU tubing..
Check Stock

GASHER 15PCS Brass Pipe Fitting Hex Bushing Reducer Adapter Reducing Hex Nipple 3/8 Inch NPT x 1/4 Inch NPT

  • Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
  • Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
  • Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
  • These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..
Check Stock

LABOR SAVING DEVICES 81-000 Creep-Zit Fiberglass Wire Running Kit green

  • Pro 36ft kit, threaded connector wire running rod.
  • 1 luminous Fiber Fuse 6ft push/pull rod with male & female threaded connector ends.
  • 5 Fiber Fuse 6ft push/pull rods with male & female threaded connector ends.
Check Stock

WDIRARA Women s High Waist Casual Snakeskin Long Pants Stretchy Flare Trousers Multicolor L

  • ★ 【Material】:Made of Litorange solid brass ensures its long-lasting use and diffcult to damage, preservative, High temperature resistance than....
  • ★ 【Size】：3/8" Female Swivel Flare x 3/8" Male Flare.Inlet Type: 3/8" Female Inverted Flare, Outlet Type: 3/8"Male Inverted Flare..
  • ★ 【Application】: Use with LP and natural gas, flammable liquids (special order), instrumental, refrigeration. power steering, hydraulic and....
  • ★ 【Easy Installation】：RV 90 degree Elbow brass Connector.And the elbow is able to provide easy installation..
  • ★ 【Package Include】: 1 PCS 3/8" female Flare by 3/8"male flare Elboe adapter. We can provide 12 months free-worry warranty, should be there any....
Check Stock

Dixon TCT30 Iron Style T Cam and Groove Hose Fitting Tank Car Connection 5 Railroad Thread Swivel Nut x 3 30 Degree NPT Male

  • 30 degree bend with two openings for connecting two threaded pipes.
  • One swivel nut end with railroad tank car thread for connecting to male tank car threaded connections and one NPT male threaded end for connecting to NPT female threaded connections.
  • Iron for strength, malleability, and ductility.
Check Stock

Dixon STMC6 Brass Hydraulic Quick-Connect Fitting, 3/4\ Male Coupling x 3/4\-14 Straight

  • Straight through quick connect male coupler for connecting directly to a hose with a male straight thread end to connect with a female straight threaded connection.
  • Straight through quick connect male coupler with a male straight threaded end.
  • Valveless construction provides maximum flow with minimum pressure drop.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability with NBR seal for high tensile strength and resistance to abrasion, tear, and compression set.
  • Used for hydraulic applications in industrial operations.
Check Stock