Categories

Best Manifold Gaskets

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

GPP Exhaust Manifold Kit Set Compatible with 1999.5-2003 Ford 7.3L Powerstroke Diesel

  • (2) Studs (manifold to exhaust pipe flange).
  • (2) Nuts (manifold to exhaust pipe flange).
  • Interchange P/N: F81Z9431AA, F81Z 9431 AA, F81Z9430AA, F81Z 9430 AA.
Check Stock

MAHLE MS19832 Exhaust Manifold Gasket Set

  • All MAHLE Original gaskets meet or exceed the original equipment specifications providing the finest sealing products available.
  • MAHLE Original gaskets utilizes OE equivalent or better materials in all our gaskets.
  • Exhaust manifold gasket set contains all gaskets required..
  • The contents of MAHLE Original gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts,....
Check Stock

ICT Billet LS3 Intake Manifold Seal Oring Gasket Set 6.2L LS L99 Rectangle Port Gen IV Compatible with Chevy Camaro (2010-2015) Corvette (2008-2013) Caprice SS G8 551278

  • Replace Your Leaking or Worn out Intake Manifold Gaskets with These new OE Spec Intake Manifold Gaskets.
  • Manufactured with High Quality Silicon to Ensure an Air Tight Seal.
  • Molded to Factory Dimensions for a Perfect fit.
  • Compatible with 2008 and up LS3 Rectangle Port Intake Manifolds.
Check Stock

Remflex 2008 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - 4.8L, 5.3L, 6.0L LS2 ('99-'08), 5.7L, LS1 LS6 ('97-'08), includes Vortec, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1440.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Skunk2 372-05-0275 Thermal Intake Manifold Gasket for Honda D-Series Engine

  • With the use of Skunk2 thermal gaskets, air intake temps are minimized which provides the your engine cooler air for combustion, and that means....
  • This and bypassing several heat sources can provide you up to 5 percent more power.
  • Skunk2 Racing thermal intake manifold gaskets are perfect for your....
  • Protects against heat soak and reduces the incoming air temperature before it reaches the cylinder head.
  • Reduces heat transfer into the intake manifold.
Check Stock

Remflex 2006 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • 1-3/8 inch width x 1-1/2 inch width Square Port - Matches the Stock cast iron Head Port.
  • Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, Stock Port, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1404.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Check Stock

LIMICAR Cylinder Head Gasket Set Head Bolts ES72173 (1st Generation) Compatible w/ 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 Chevrolet Silverado Tahoe GMC Yukon Envoy Buick Cadillac 4.8L 5.3L

  • ...Head Gasket systems can withstand high pressures, high temperatures and aggressive media of a car. LIMICAR give technicians not only the gaskets the project requires, but the very best technology available..
  • ✅Package Inclued: Multi-layered Steel(MLS) Head Gaskets.
  • 30PCS Head Bolts(ES72173 1st Generation)..
  • ✅NOTICE: Please check the description and compatibility chart before your purchasing. Head Bolts Size 1: Quantity: 16, Length(mm): 155, Thread Pitch(mm): 2, Thread Size: M11. Head Bolts Size 2: Quantity: 4, Length(mm): 100, Thread Pitch(mm): 2, Thread Size: M11. Head Bolts Size 3: Quantity: 10, Length(mm): 45, Thread Pitch(mm): 1.25, Thread Size: M8..
Check Stock

Finish 1 4.1 VOC Gray Enamel Sealer Undercoat (Gallon)

  • Fast-drying, metallic copper sealant that helps dissipate heat.
  • Prevents gasket burnout and improves heat transfer.
  • Resists all types of automotive fluids, especially gasoline.
  • Typical applications include cylinder head gaskets, carburetor gaskets, exhaust manifold gaskets and other high temperature applications.
Check Stock

Loctite 37464 Grey RTV 598 High Performance Silicone. 80 ml.

  • Fast-drying, metallic copper sealant that helps dissipate heat.
  • Prevents gasket burnout and improves heat transfer.
  • Resists all types of automotive fluids, especially gasoline.
  • Typical applications include cylinder head gaskets, carburetor gaskets, exhaust manifold gaskets and other high temperature applications.
Check Stock

Tektall Alloy 1\ Intake Manifold Spacer Replace for Ford GT-40 5.0 Mustang explorer Cobra 1987-1993 Durable

  • 【Good Quality】 Tektall 1" Intake Manifold Spacer made of High quality alloy.Sturdy and durable, and has reached OEM specifications..
  • 【Fitment】Tektall Alloy 1" Intake Manifold Spacer fit for Ford Mustang 5.0L GT-40 explorer Cobra 1987-1993 year..
  • 【Product Dimension】 THICKNESS 1" Made of High quality alloy..
  • 【High Performance】Tektall Intake Manifold Spacer can reduce heat transfer from the engine to the intake manifold. The result is a colder IAT (don’t forget, colder air is more dense, which means more horsepower!). The end result is increased horsepower and allowed to increase time with fewer explosions..
  • 【Package Includes】 1 X Intake Manifold Spacer, 2 X Gaskets, 1 X Mounting Hardware kit. Please confirm the item if it matches your machine before you purchase..
Check Stock

Dorman 615-188 Engine Intake Manifold Compatible with Select Ford Models

  • Ideal replacement - this intake manifold is engineered to reliably replace the original equipment manifold on select Ford vehicles with 5.4L V8 engines.
  • Made in USA - designed, engineered and manufactured in the United States to deliver consistent quality and precise construction.
  • Proven design - features multiple improvements that make it look slightly different than the factory design but still match factory fit and performance.
  • Complete kit - includes manifold, auxiliary coolant fitting, thermostat, specially designed gaskets, O-ring and self-tapping screws.
Check Stock