Categories

Best Manual Bending Machine

VEVOR Hydraulic Rebar Bender, 3000W, Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine For Bending Rebar, Steel Bar, Steel

  • 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
  • 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....
Check Stock

VEVOR Hydraulic Rebar Bender, 3000 Wattage Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine for Bending Rebar, Steel Bar, Steel Rod

  • 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
  • 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....
Check Stock

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

Vibration Plate Exercise Machine – Belmint Lymphatic Drainage Machine – 2 Resistance Bands and Fitness Workout Instructions – Equipment Improves Circulation & Strength

  • ...es it easier to maneuver + store in your home. Your home is more comfortable than the gym, as this works well and shakes vigorously..
  • USER-FRIENDLY: It’s fun workout equipment for women or men with it’s bluetooth speaker that can blast music. Choose your own speed level, from 1 - 99 and use the remote instead of bending..
  • HEALING AND PAIN RELIEF: This is used as healing exercise equipment for seniors, arthritis, osteoporosis, after injury, back pain, fibromyalgia etc. It’s vital to ask your doctor for permission before using. With your doctor’s approval, it can be amazing to reduce pain..
  • ONE YEAR WARRANTY: You are buying high performance fitness gear that'll hold up to 265 lbs of weight. And we stand behind that statement with a premium 1 year warranty. If you encounter any issue, please contact us for a replacement or your money back..
  • WEIGHT LOSS: The vibrating platform gives more power to regular exercise movements. Perform exercise steps on the machine to tone, strengthen or burn fat..
Check Stock

Spoon Ring Bender, Ring Bending Tool, Spoon Ring Making Machine Tool Kit for Jewelry Spoon Rings Press DIY

  • QUALITY - Our ring bending tool is made of quality steel, and the white ones in this ring making kit are nylon dies, used for softer materials that might scratch or dent..
  • DESIGN - The ring maker machine includes 9 sizes of bending posts of metal, and reusable negative bend pieces of metal and nylon for each post size. This is a multi-functional ring making tool, it works simple and easy to change the dies..
  • DURABLE - Our ring bending machine is sturdy and durable, works for bending silverware and making rings and jewelry, the thickness of the flatware will be the only limiting factor..
  • SIMPLE - It's simple to set the spoon ring maker machine up, and it's fun and easy to make spoon rings with our ring bender machine, for both beginners and practitioners..
  • SERVICE - If you have any questions about our ring bending kit, please feel free to contact us for solutions..
Check Stock

LiFuJunDong Household Seeding Machine Adjustable Manual Handheld Corn Peanut Seeder Seed Fertilizer Spreader Planter

  • T Wheat, soybean, red bean, pea, corn, broad bean and other granular seeds can be ordered..
  • It can fertilize and sow at the same time, and the amount of seed, the amount of fertilizer and the depth of sowing can be adjusted..
  • It can fertilize and sow 6-8 mu, which is 3-5 times of manual planing and sowing, no oil, no electricity, pure manpower type, simple operation, a few minutes can be learned..
  • The machine has abandoned the traditional manual bending, digging and sowing mode..
  • Inject the fertilizer and seed directly into the soil at one time. Separate the seed from the fertilizer by 5 centimeters. The fertilizer is one centimeter deeper than the seed. Moreover, fertilization and sowing can maintain the same depth, which is more convenient and efficient than traditional planing and sowing..
Check Stock

Micro Jig SG-133 MATCHFIT Setup Gauge by MICROJIG. Dado Stop Accessory, Yellow

  • All-In-One Brake Machine: Industrial 12in 3-in-1 sheet metal machine is a smart choice for shops. This machine combines three functions into one that utilizes up little floor space and enhances work efficiency..
  • Solid Construction: This 3-IN-1 brake shear roll has a heavy cast-iron frame. The slip roll portion of the shear brake roll has hardened and polished shafts for long life. Designed to perform in a harsh condition and can stand for longer life..
  • Flexibility & Precision: The vertical press brake portion of the shear brake roll machine has a maximum bend angle of 90 degrees with adjustable fingers on the top beam to easily assist with making any size boxes. This ensures adjustability and high accuracy..
  • Manual Operation: You can operate the machine with this lever to make any bendings and rollings as you need. Roll diameter: 39mm. Max. Bending angle: 90°Max. thickness: 20Ga..
  • Multiple Utilization: Widely used in factories, workshops, shops, etc. This 12" brake shear roll can be utilized to cut multiple materials. The shear can be used for mild steel, aluminum, brass, copper, lead, plastic, and zinc..
Check Stock

VEVOR 1.5KW Electric Rebar Bender, 1''(25mm) Hydraulic Electric Hand Held Rebar Bender & Happybuy Electric Rebar Cutter, 1.7KW 110V Electric Hydraulic Rebar Cutter

  • Product 1: 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
  • Product 1: 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Product 1: Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Product 1: Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the st....
Check Stock

Happybuy Electric Hydraulic Rebar Cutter, 900W Portable Electric Rebar Cut 5/8' 16mm #5 Rebar within 3 Seconds, 110V

  • 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
  • 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its origi....
Check Stock

VEVOR 1.5 KW Electric Rebar Bender, 1''(25 mm) Hydraulic Electric Hand Held Rebar Bender, within 5 s, 110 V

  • 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
  • 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its origi....
Check Stock

VEVOR SBG-40 Metal Scroll Bender High-Hardened Steel Scroll Bender Combination of Scroll Radius and Angle Bending Universal Metal Rod Bender For Steel Brass Cooper Aluminum

  • 5/8" Bending Capacity: The bender can easily and smoothly bend max thickness stocks the diameter of 5/8" tubes. And The metal bending tool is made of high-hardness steel.
  • it can be used for a long time. The heavy base improves stability during operation..
  • 3 in 1 Bender: Our bender has a multi-function of bending. It can achieve angle bending, radius bending and scroll bending. Thus, the machine can meet different usage needs, making your work more convenient..
  • Different Shape of Materials: The product is able to bend different metal materials such as steel, wrought iron, brass, copper, aluminum, etc. Max flat steel size: 1-3/16" x 5/16"(30 x 8 mm), max round steel size: 5/8" (15.8 mm) , max square steel size: 19/32" (15 mm)..
  • Energy-saving Structure: The metal bender adopts long handle with ergonomic design for effortless operation. At the same time, this iron bender machine has a wide support surface. It can be installed on a bracket or simply on the ground..
  • Universal Usage: A multifunctional steel bender machine produces grids, gates, balcony railing, patio furniture, iron lamps, power construction, road building, bridges pipeline laying or repairing, etc..
Check Stock

Cavnewt Hat brim bender,Hat rack,Hat shaper,Hat organizer for baseball cap,Hat pins for fitted hats,Fitted hats for men,Hat curving band,Hat bender brim,Hat curving tool,Fitted hat,Caps

  • 【Easy to use】Insert the hat into the hat bending tool and leave it for more than 24 hours, the curve of the brim can be perfectly displayed. Use the hat bending tool to stand for more than 24 hours before participating in activities or wearing a hat, and the curve after bending is perfect..
  • 【No environmental restrictions】The hat bending machine is easy to carry and can be used on the table, door hat rack, hat hook, and can also be used outdoors.
  • 【Sturdy and durable】The hat shaper uses high-quality abs, which is flexible in bending and will not be easily broken, caught by the door, and will not break.
  • 【Two options】The hat stylist has a large radius of 2.5 inches and a small radius of 2 inches. The edge bending machine has two bending radii to choose from, and the shape after bending is different..
  • 【Wide Applicable】The hat bending tool is suitable for all visor hats,suitable for sun hats,baseball caps,fishing hats,hunting hats,cowboy hats,sun hats,casual hats, Ashland Cap,Canvas Mesh-Back Cap,Pizza Hat,Trucker Mesh Cap.
Check Stock