Categories

Best Manual Oil Filter Cutter

Cuisinart Deep Fryer, 1.1 Quart

  • EXCEPTIONAL DESIGN: Compact footprint takes up less counter space. Fast heat-up and frying for spur-of-the-moment snacks and meals.
  • CAPACITY: Fry basket holds up to 3/4 pound– maximum oil capacity is 1.1 liter.
  • INCLUDED: Filter cover, anti-odor charcoal filter, basket, detachable basket handle, nonstick diecast bowl with pouring spout, detachable power cord and recipe book.
  • CLEAN UP: Caution- before cleaning make sure appliance and oil have completely cooled. Basket, basket handle and lid are dishwasher safe. Refer to manual on safely removing oil and cleaning the rest of the deepfryer.
  • LIMITED 3-YEAR WARRANTY: Refer to user manual for troubleshooting steps and questions surrounding warranty policies – this product is BPA free.
  • Maximum oil capacity 1.1 liter, Fast heat-up and frying.
  • Nonstick die-cast bowl with attached heating element for superior heating, 1000 Watts.
Check Stock

Subaru Engine Oil Filter & Crush Gasket Kit SOA6351520815 Outback Legacy Impreza Forester XV Crosstrek Ascent

  • Subaru as of 11/1/2022 has updated the oil filters !!!! So the one you remove may not match the one that is currently available from Subaru..
  • Genuine Subaru Engine Oil Filter removes millions of microscopic pollutants and dust particles. Remember to change your engine oil and filter every 6 months or every 7,500 miles depending on conditions where you are. Check your owner’s manual for the replacement schedule that’s right for your Subaru. Don't settle for aftermarket components of questionable quality and always insist on Genuine Subaru Engine Oil Filter replacements..
  • Subaru Part Number: SOA6351520815 (Filter), 803916010 (Crush Gasket).
  • Your package will include 1 of each filter and gasket.
  • 2013-2023 Outback and Legacy (4-Cyl. Only).
Check Stock

Generac 6811 Storage Cover, 5kW-8kW Portables

  • Scheduled maintenance kit is for standby home generators.
  • Kit for 12-18-Kilowatt 760cc - 990cc Engines.
  • Maintenance is recommended every 200-hours or 2-years.
  • Includes a pre-cleaner, air filter, oil filter, oil funnel, (2) spark plugs, chamois, instruction manual and preventative maintenance reminder sticker.
Check Stock

Generac Maintenance Kit for 7kW Home Standby Generator (410cc)

  • Scheduled maintenance kit is for standby home generators.
  • Maintenance is recommended every 200-hours or 2-years.
  • Includes an air filter, oil filter, oil-funnel, spark plugs, wrench, chamois, instruction manual and preventative maintenance reminder sticker.
Check Stock

aingycy Frozen Meat Slicer Hand Slicing Machine Stainless Steel Frozen Beef Mutton Bacon Meat cutter Vegetable Fruit meat cleaver for Home Kitchen and Commercial Use (Sliver)

  • High performance hardness blade – Medozic meat slicer is made of 40CR14 stainless steel. Equipped with an ergonomic handle, the meat cutter can quickly slice frozen beef, meat, lamb, ham and so on..
  • Stable and safe – The meat cutter machine comes with anti-rollover design, stable handle and balanced base to make the meat slicer safer and more stable. The carving roll and hard object fuselage can grasp the table steadily to avoid hurting..
  • Easy and efficient operation – The manual slicer integrated stainless steel handle and a 200mm high hardness alloy steel blade, which is sharp and durable. The cutting length of the blade can reach 190mm, Blade thickness is 5mm..
  • Humanized accessories – Medozic manual cutter equipped with a food tray, which can be used to place food, does not pollute the desktop, it is easy to storage..
  • Easy to clean – Rinse the manual biltong slicer in the sink after using, and then keep it dry. Using a few drops of cooking oil to the food slicer blades and bearings for simple maintenance..
Check Stock

3 STAGE INDUSTRIAL GRADE IN-LINE COALESCING FILTER & DESICCANT AIR DRYER COMBINATION WITH METAL BOWLS FOR SPRAY GUN EQUIPMENT PAINT BOOTH COMPRESSOR PLASMA CUTTER 3/4 AUTO DRAIN

  • 3 STAGE, INDUSTRIAL GRADE COALESCING FILTER PLUS DESICCANT AIR DRYER, IN-LINE TYPE FOR COMPRESSED AIR LINES, PERFECT FOR SPRAY OR PLASMA CUTTER APPLICATIONS..
  • 2 BAGS OF DESICCANT BEADS INCLUDED, BEADS GO FROM BLUE TO PINK WHEN TIME TO CHANGE.
  • STAGE 1: PARTICULATE FILTER / WATER TRAP REMOVES 95% OF MOISTURE AND DEBRIS FROM COMPRESSED AIR LINES. 5u MICRON ELEMENT.
  • STAGE 2: COALESCING FILTER / OIL REMOVING FILTER REMOVES 99.98% OF MOISTURE, OIL AND CONTAMINANTS FROM YOUR COMPRESSED AIR LINES.
  • STAGE 3: DESICCANT DRYER TAKES UP TO 5oz OF DESICCANT BEADS TO THOROUGHLY DRY OUR YOUR COMPRESSED AIR LINES BEFORE THE AIR GETS TO YOUR PNEUMATIC TOOLS.
Check Stock

3 STAGE INDUSTRIAL GRADE IN-LINE COALESCING FILTER & DESICCANT AIR DRYER COMBINATION WITH METAL BOWLS FOR SPRAY GUN EQUIPMENT PAINT BOOTH COMPRESSOR PLASMA CUTTER 1/2 AUTO DRAIN

  • 3 STAGE, INDUSTRIAL GRADE COALESCING FILTER PLUS DESICCANT AIR DRYER, IN-LINE TYPE FOR COMPRESSED AIR LINES, PERFECT FOR SPRAY OR PLASMA CUTTER APPLICATIONS..
  • 2 BAGS OF DESICCANT BEADS INCLUDED, BEADS GO FROM BLUE TO PINK WHEN TIME TO CHANGE.
  • STAGE 1: PARTICULATE FILTER / WATER TRAP REMOVES 95% OF MOISTURE AND DEBRIS FROM COMPRESSED AIR LINES. 5u MICRON ELEMENT.
  • STAGE 2: COALESCING FILTER / OIL REMOVING FILTER REMOVES 99.98% OF MOISTURE, OIL AND CONTAMINANTS FROM YOUR COMPRESSED AIR LINES.
  • STAGE 3: DESICCANT DRYER TAKES UP TO 5oz OF DESICCANT BEADS TO THOROUGHLY DRY OUR YOUR COMPRESSED AIR LINES BEFORE THE AIR GETS TO YOUR PNEUMATIC TOOLS.
Check Stock

SPELAB 2.5 Inch Stainless Steel Exhaust Pipe Kit

  • ★ It CANNOT compatible with Lotos LCOn20, LCON40 or LCON90 Consumables Sets or any other third part consumables set. ★ PACKAGE INCLUDES: Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4” industry type D plug and Air filter regulator, consumables, Instruction Manual, etc..
  • ★ SETUP WITHIN 1 MIN: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min..
Check Stock

Abnaok Gasoline Siphone Hose, Gas Oil Water Fuel Transfer Siphon Pump, Portable Widely Use Hand Fuel Pump, Fuel Transfer Pump with 2 Durable PVC Hoses

  • PREMIUM QUALITY: Rubber hand pump that starts siphoning liquid flow quickly. 2 flexible Duarable PVC transparent hoses provide easy reach into containers, petrol resistant, avoid corrosion..
  • MUST NEEDED: Ideal for emergency gas transfer, it can transfer any liquids like gasoline, oil, water, beer and so on. A good tool at home for multiple usage..
  • EASY TO USE: Lightweight and portable siphon manual pump, ideal for various vehicles without anti-theft filter net, such as lawn Mower, brush cutter, hedge trimmer, etc..
  • SAFE ATTENTION: Don't use mouth to start the siphoning process, not suitable for drink water, salt water and any chemical liquids..
  • 2-MONTH HASSLE-FREE return and money back, please buy with confidence..
Check Stock

slicer

  • 3-Position Manual Slider Button allows blade to stay locked in 3 positions (Fully extended blade, semi-protruding blade, Fully hidden blade).
  • Zirconium Oxide Ceramic Blade with Rounded Tip for Safety = Non-Conductive, Anti-Magnetic, Never Rusts, Chemically Inert (No Oil Coatings) + Stays Sharp Up To 10X Longer Than Steel Blades.
  • 1 Slice Ceramic Blade = Up to 20 Metal Blades = Less Blade Changes = Less $$$ = Less Downtime = Less injuries + Simple No Tool Blade Change (Replacement SKU# 10404 or 10408).
  • Ceramic Blade only protrudes 1/2" - designed primarily for cutting corrugated packaging, foam, vinyl, boxes, cardboard, etc.
  • To cut paper and thinner items please try the Slice 00116 Precision Cutter or 00100 Safety Cutter or use the Pointed Blades 10408.
  • Stylish, durable, and safer to use than traditional utility knives.
  • Dual-sided ceramic blade lasts as long as 20 metal blades.
  • ten times sharper than metal blades and never rusts.
Check Stock

Generac 6483 Scheduled Maintenance Kit for Home Standby Generators with 10 kW 533cc Engines

  • Scheduled maintenance kit is for standby home generators.
  • Maintenance is recommended every 200-hours or 2-years.
  • Includes a pre-cleaner, air filter, oil filter, oil funnel, (2) spark plugs, chamois, instruction manual and maintenance sticker.
Check Stock

ABN Tile & Mosaic Nipper, Cutter Pliers with Carbide Trimming Tips

  • [Fit for Your Tool Kit]: When you need to trim and cut porcelain or tile, depend on the ABN Tile Cutter Hand Tool Ceramic tile Cutter.
  • Use this Manual tile cutter porcelain tile cutter when working on flooring, walls, mosaics, and more.
  • [For Your Project]: Tile cutting tools ceramic cutter allows you to make quick and easy cuts.
  • Use tile cutter tools when it comes to irregular cuts for customizations in tile or stonework.
  • [Built to Last]: Tile manual cutter constructed of chrome vanadium for strength and longevity.
  • No need to worry about tile cutter hand tool ceramic hand tile cutter breaking or bending under the pressure.
  • [Comfort Grip]: Tile cutter includes soft rubber coated handle grips.
  • Tile hand cutter wall tile cutter handle ensures control while in use so that there will be no slips while in use.
  • Handles measure 8 inches (20cm) in length.
  • [Measurements]: The sharp, straight carbide-tipped ends of the manual ceramic cutter have a cutting surface of over 3/4 inches (1.9cm) for tile.
  • Ceramic tile cutter tools spans up to 1/2 inches (1.27cm)....
Check Stock

LOTOS LT5000D 50A Air Inverter Plasma Cutter Dual Voltage 110/220VAC 1/2\ Clean Cut

  • ★ It CANNOT compatible with Lotos LCOn20, LCON40 or LCON90 Consumables Sets or any other third part consumables set. ★ PACKAGE INCLUDES: Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4” industry type D plug and Air filter regulator, consumables, Instruction Manual, etc..
  • ★ SETUP WITHIN 1 MIN: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min..
Check Stock