Categories

Best Manual Pipe Flaring Tool

HVAC Flaring Tool Kit for 1/4 - 3/4 Copper Pipe Flare Tool 45°Eccentric Single Tubing Flaring Tool with Pipe Cutter & Deburring Tool for Copper Aluminum Pipes Refrigeration Air Conditioner Repair

  • The accuracy eccentric cone flaring tool produces 45 Degree flares in soft copper, brass, aluminum or stainless steel pipes. Widely used in HVAC, air conditioners, air heaters, refrigerators maintenance, etc..
  • Our HVAC Flaring Tool Kit comes with 2 types of flaring clamps applicable pipe O.D.Inch: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" Metric: 6mm, 9mm, 10mm 12mm, 16mm, 19mm)..
  • The eccentric flaring cone provides for easy clamping and removal of tubing, Large feed screw handle for smooth turning with little effort (NOTE: It will only do single flare - not double flare!).
  • The flare tool is designed with a clutch in the rotating handle, which will automatically disconnect when the flaring is completed..
  • Package includes 1x Flaring Tool, 2x Clamp(inch & metric type), 1x Deburring Tool, 1x Tube Cutter for O.D. 6-50mm tubes, 1x Manual Book, 1x Suitcase..
Check Stock

Tubing Flaring Swage Tool Kit - Heavy Duty Steel Swage Tool Set for Copper Plastic Aluminum Thin Pipe With Tubing Cutter Tubing Bender & Ratchet Wrench

  • Note: The picture is for reference only, the actual product shall prevail. Material:Aluminum alloy steel cutter body, surface plating..
  • Tubing Cutter: suitable for cutting pipe diameter between (3-28mm)1/8-inch to 1-1/8 Inch for Pipe Copper PVC Thin Stainless Steel Tube..
  • 3 in 1 Pipe Bender: Three sizes of tubing 1/4", 5/16" and 3/8". Bending 0-180 degree copper , aluminum ,brass,and thin stainless steel pipes in the....
  • Double Flaring Tool Kit:This flaring tool kit is an tool for pipe flaring, and it can be used to make single or double flares on copper, brass and....
  • Easy to Use:The Screw of the pipe cutters provide easy control of cutting pressure for clean cuts.Flare groove rollers make rotation simple and....
Check Stock

ICOOL Single Flaring Tool & Swaging Tool Kit Brake Line Flaring Tool with Ratchet Wrench & Tubing Cutter for Copper HVAC Water Gas Pipe Brass Magnesium and Soft Steel Lines

  • 【TOTAL PACKAGE】This comprehensive 10 pcs tool kit includes 1 flaring cone, 2 flaring bars, 5 swaging adapters, 1 tube cutter, 1 ratchet wrench and....
  • 【RANGE OF FLARING】Flaring tool applies to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4"O.D. tubing.
  • 【RANGE OF SWAGING】Swage adapters are suitable for 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing.
  • 【OTHER TOOLS】Tube cutter applies to copper pipe/ tubing, HVAC water gas pipe, brass, magnesium and soft steel lines, its cutting capacity is....
  • 【DURABILITY & PORTABILITY】 The flaring tool kit is solid and handy, which is built from the toughest steel and chrome plated. A hard plastic....
Check Stock

ABN Bubble Flare Tool & Double Flaring Kit – Tubing Bender Flare Tool & Pipe Cutter (1/8in to 5/8in / 3-16mm)

  • MAKE DOUBLE & BUBBLE FLARES: The ABN Double Flare Kit & Bubble Flaring Tool create flares for bending brake and fuel pipes, lines, braking pipe repairs, water, gas, refrigeration, and more.
  • Fixed head and angles make clean, precise flares.
  • Yoke type compressor with T-bar handle for firm grip.
  • For 3/16″, 1/4″, 5/16″, 3/8″, 1/2”, 4mm, 4.75mm, 6mm, 8mm, 10mm steel, aluminum, and copper tubing.
  • QUICK & PRECISE CUTS: Use the included small pipe cutter to cut 1/8-inch to 5/8-inch (3-16mm) steel, aluminum, and copper tubing.
  • Pull back the blade and revolve the pipe while compressing.
  • 2 rollers prevent skipping and jumping for most consistent tracking.
  • Cutting wheel life and adjustment amount for each turn of tool is directly proportionate to the hardness of material being cut.
  • BUILT TO LAST: Swivel constructed from chrome-plated alloy steel to reduce friction.
  • Yoke forged from heat-treated steel for maximum strength and longevity that resists corrosion.
  • EASY STORAGE: Heavy-duty 11.9” x 2.8” x 9.2” inch (30.2cm x 7.1cm x 23.4cm) plastic blow-molded carrying case with latches and handle for easy transportation, safe storage, and quick organization.
  • Includes double flaring and bubble flaring instruct....
Check Stock

Bonvoisin Hydraulic Tubing Expander Flaring Tool 2 in 1 Swaging Tool Kit 3/16’’-7/8’’ Copper Pipe Expanding 45° Flare Tool with Tubing Cutter 6 Dies for HVAC Air Conditioner Refrigerator Repair

  • [Expanding & Flaring 2 in 1] - This hydraulic swaging tool kit can be used for flaring and expanding of copper pipes, which can meet your maintenance....
  • [Parameters] - Suitable for 12 different pipe diameters: Φ3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”, 6mm, 10mm, 12mm, 22mm.....
  • [High Efficient & Portable] - Compared with manual flaring tools, hydraulic type is more time-saving, labor-saving and more efficient. The thickened....
  • [Wide Application] - This repair tool is applicable to soft copper / aluminum pipes, and widely used in the maintenance of HVAC, refrigerators, air....
  • [One-year Warranty] - Within one year of purchase, if something goes wrong with the product, you can replace it for free..
Check Stock

8 Pcs Swaging Tool Drill Bit Set HVAC Repairing Set Air Conditioner Manual Copper Pipe Swage Tube Tool with Copper Pipe Cutter and Deburring Tool for Copper Aluminum and Thin Stainless Steel Tube

  • 【What You Will Get】: This air conditioning copper pipe flaring tool set contains 8 tools: 6 Pcs different size drill bits, 1 Pc mini copper pipe cutter, 1 Pc deburring tool, complete set of tools, very suitable for air conditioning copper pipe flaring operation during HVAC installation, no complicated learning, easy to use..
  • 【Drill size】: 6 different sizes of drill bits, including 1/4'', 3/8'', 1/2'', 5/8'', 3/4'', 7/8''.
  • Handle diameter: 7 mm (hexagonal handle), pipe reaming tool is a necessary accessory for repairing air conditioners..
  • 【Mini copper pipe cutter】: 3-28mm (1/8" - 1 1/8") copper pipe cutter can cut copper pipe, steel pipe, stainless steel pipe, aluminum pipe PVC and iron. Note: Cutting PVC pipe is not recommended because it is much more difficult to cut..
  • 【Deburring Tool】: The blade is mounted on the handle can rotate 360 degrees, this tool helps to clean the top of the pipe or tube, it has a compact size and can easily be carried anywhere..
  • 【Why Do You Need HVAC Tools Drill Bit Set】: When connecting copper pipes of air conditioners, the soft copper pipes are expanded by the rotation of the drill bit, so that the two copper pipes are connected without leakage. When used in combination with electric drill and impact....
Check Stock

Wostore Flaring Swage Tool Kit for Copper Plastic Aluminum Pipe With Tubing Cutter & Ratchet Wrench

  • 【ALL IN ONE KIT】：The kit includes 1 flaring cone, 2 flaring bars, 5 swage fittings, 1 tubing cutter, 1 ratchet wrench and 1 storage case..
  • 【EXTENSIVE RANGE OF FLARE ADAPTERS】：Flaring tool apply to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" O.D. tubing..
  • 【COMMON SWAGE FITTINGS】:Swage fittings are used to 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing, a rugged and durable flaring....
  • 【PRACTICAL TOOLS】:Tube cutter:1/8"-1-1/8" (3-28MM) Pipe, Ratchet wrench:3/16",1/4",5/16",3/8" for square valves, such as valves on hose bibs and....
  • 【DURABILITY AND ACCURACY】:This flaring kit swivel-type swaging adapters and flaring cone are made of the sturdiest steel and chromed for easy....
Check Stock

LIAMTU Tubing Flaring Tools Kit Heavy Duty Steel Swage Tool Set Include Pipe Cutter & Ratchet Wrench

  • ALL INCLUSIVE KIT: LIAMTU tubing flaring tools kit includes all the parts to finish a tubing flaring&swaging work.
  • WIDE RANGE OF APPLICABILITY: this flaring kit can finish 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8"& 3/4" O.D. tubing flaring work.
  • HIGH HARDNESS MATERIALS: the flaring tool, pipe cutter and ratchet spanner are made of the sturdiest steel materials and chromed finished for easy....
  • SELF-CENTERING YOKE: two bars included covering nine sizes with a self-centering, slip-on forged steel yoke to help form professional and quality....
  • EASY TO CARRY: all parts can be put into a blue color hand carrying plastic case.
Check Stock

Wostore Double Flaring Tool Kit for 3/16″-5/8″ 7 Dies Automotive Line Tubing Cutter with Replacement Blade and Remear

  • 【Set Included】Flare bar x 1, flaring cone x 1, flare adapters x 7, tubing cutter x 1 and carrying case x 1..
  • 【Multifunction】Double or single automotive flaring tool set,Creates 45 degree double or single flares for bending brake and fuel pipes, lines, braking pipe repairs, water, gas, refrigeration. Suitable for most soft steel, aluminum, brass and copper pipes.Pipe cutter has 2 rollers secure the tube better.
  • Fold-away slide lock tube reamer deburring blade for a better connection.
  • 【Application】Double automotive flare tool kit suitable: 3/16”, 1/4”, 5/16”, 3/8″, 7/16″, 1/2″, 5/8″(5,6,8,10,12,14,16mm).
  • Tubing cutter has a 1/8 to 1-1/8 inches (3-30mm) capacity with inner outer reamer..
  • 【Durable Design】Yoke Heat-treated steel material for maximum strength and longevity that resists corrosion.Swivel constructed from chrome-plated alloy steel to reduce friction..
  • 【Portable】Heavy-duty plastic blow-molded carrying case with latches and handle for easy transportation, safe storage and quick organization. Instruction includes for use easily..
Check Stock

Wostore Flaring Tool Kit for Copper Pipe HVAC

  • The kit includes 1 flaring cone, 2 flaring bars, 5 swage fittings and 1 storage case..
  • Flaring tool apply to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" O.D.tubing..
  • Swage fittings are used to 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing, a rugged and durable flaring tool, swaging tool kit.
  • Versatile tool kit in a combination tubing flaring and swaging to fit all your needs..
  • This flaring kit swivel-type swaging adapters and flaring cone are made of the sturdiest steel and chromed for easy operation and precision. Plastic....
Check Stock

Wostore Double Flaring Tool Kit for 3/16"-5/8" 7 Dies Automotive Brake Line Tube Cutter with Replacement Blade and Reamer

  • 【Set Included】Flare bar x 1, flaring cone x 1, flare adapters x 7, tubing cutter x 1 and carrying case x 1..
  • 【Multifunction】Double or single automotive flaring tool set,Creates 45 degree double or single flares for bending brake and fuel pipes, lines, braking pipe repairs, water, gas, refrigeration.Suitable for most soft steel,aluminum,brass and copper pipes.Pipe cutter has 2 rollers secure the tube better.
  • Fold-away slide lock tube reamer deburring blade for a better connection.
  • 【Application】Double automotive flare tool kit suitable: 3/16”, 1/4”, 5/16”, 3/8", 7/16", 1/2", 5/8"(5,6,8,10,12,14,16mm).
  • Tubing cutter has a 1/8 to 1-1/8 inches (3-30mm) capacity with inner outer reamer..
  • 【Durable Design】Yoke Heat-treated steel material for maximum strength and longevity that resists corrosion. Swivel constructed from chrome-plated alloy steel to reduce friction..
  • 【Portable】Heavy-duty plastic blow-molded carrying case with latches and handle for easy transportation, safe storage and quick organization. Instruc....
Check Stock

HVAC Flaring and Swaging Tool Kit Flares OD Soft Refrigeration Copper Tubin

  • HVAC Flaring and Swaging Tool Kit Flares OD Soft Refrigeration Copper Tubing.
  • This is a heavy duty steel Flaring and Swaging Tool Kit for flaring and Swaging copper tubing.With this Flaring and Swaging Tool Kit you can flare or....
  • Copper tubing flaring tool + copper tubing swaging kit in a combination tubing flaring./swaging kit to fit all your needs.
  • For 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8"& 3/4" O.D. Tubing. 5 Swage Adapters For: 3-in-1 (3/16",1/4",3/8") ,5/16",1/2",5/8"& 3/4" O.D.Tubing.....
  • Swivel type Swaging adapters and flaring cone are hardened steel chrome finished for easy operation Self centering, slip-on forged steel yoke Blow....
Check Stock

Shankly Flaring Tool Set 9 Piece - Professional Grade Heavy Duty Brake Line Flaring Tool Kit and Swage Tool Flare Tool with Tubing Straightener or Cutter Not a Double Brake Flaring Tool

  • ✅ ALL-INCLUSIVE KIT: Shankly's standard flaring tool kit includes an all-inclusive professional tubing straightener or cutter, allowing the mechanic....
  • ✅ PRECISE AND CONVERTIBLE: This brake line flaring tool swivel-type swaging adapters and flaring cones are made of the strongest steel materials and....
  • ✅ MULTIFUNCTIONAL FLARE ADAPTERS: This is the only flaring tool set a mechanic will require because it includes flaring tool adapters in the....
  • ✅ FITS YOUR APPLICATION: Shankly's flaring tool or brake line tool includes five swage fittings and several useful tube sizes: 3/16”, 1/4”,....
  • ✅ SATISFACTION GUARANTEED: We stand by the word "quality" we assure you that your purchase of this heavy-duty brake line flaring tool or brake tool....
Check Stock