Categories

Best Manual Precise Turret Lathe

BestEquip Metal Lathe 8x16 Maintenance Free Brushless Motor Precision Mini Metal Lathe Variable Spindle Speed Lathe Machine 50-2500 RPM 750 W for Various Types of Metal Turning

  • Sturdy Construction: The mini lathe features a finish that stands up to tear and wear. It is equipped with a 750W brushless motor that needs little....
  • Infinitely Variable Speeds: Revolving Speed Range: 0-2250 RPM. The mini lathe machine comes with variable speeds that give you the convenience to....
  • Works with Precision: Spindle Bore: 0.8" / 21 mm. The metal working lathe will come with a 3-jaw chuck and an extra 4-jaw chuck, which clamp raw....
  • Faster & More Effective: Swing Over Bed: 8.3" / 210 mm. The small metal lathe features a turret post for quick tool change and a cross slide for free....
  • Diversified Application: The lathe produces precision work without taking up a lot of room in your shop or garage, making bushings, spindles,....
Check Stock

How To Run A Lathe: For The Beginner: How To Erect, Care For And Operate A Screw Cutting Engine Lathe

  • ...Bore: 1.5"/38 mm. The metal working lathe is pre-installed with a 3-jaw chuck, 4.9"/125 mm in diameter, that can clamp raw materials tight, and a backsplash guard that prevents metal filings..
  • Stable & Reliable Operation: Swing Over Bed: 8"/210 mm.
  • Swing Over Cross Slide: 32"/800 mm. The small metal lathe features a turret post for quick tool change and a center rest for tight pieces holding, making internal cutting, face cutting, and bevel cutting possible..
  • Wide Application: The lathe produces precision work without taking up a lot of room in your shop or garage, making bushings, spindles, prototypes, models, and more..
Check Stock

How To Run A Lathe: For The Beginner : How To Erect, Care For And Operate A Screw Cutting Engine Lathe

  • ...Bore: 1.5"/38 mm. The metal working lathe is pre-installed with a 3-jaw chuck, 4.9"/125 mm in diameter, that can clamp raw materials tight, and a backsplash guard that prevents metal filings..
  • Stable & Reliable Operation: Swing Over Bed: 8"/210 mm.
  • Swing Over Cross Slide: 32"/800 mm. The small metal lathe features a turret post for quick tool change and a center rest for tight pieces holding, making internal cutting, face cutting, and bevel cutting possible..
  • Wide Application: The lathe produces precision work without taking up a lot of room in your shop or garage, making bushings, spindles, prototypes, models, and more..
Check Stock

VEVOR Metal Lathe, 210x800 Mini Lathe Machine, 2500 RPM Variable Speed Change, 850W Precision Mini Lathe, Metal Working Lathe with Brushless Motor, Milling Machine for Various Metal Turning

  • ...Bore: 1.5"/38 mm. The metal working lathe is pre-installed with a 3-jaw chuck, 4.9"/125 mm in diameter, that can clamp raw materials tight, and a backsplash guard that prevents metal filings..
  • Stable & Reliable Operation: Swing Over Bed: 8"/210 mm.
  • Swing Over Cross Slide: 32"/800 mm. The small metal lathe features a turret post for quick tool change and a center rest for tight pieces holding, making internal cutting, face cutting, and bevel cutting possible..
  • Wide Application: The lathe produces precision work without taking up a lot of room in your shop or garage, making bushings, spindles, prototypes, models, and more..
Check Stock

Mini-Lathe Tools and Projects for Home Machinists (Fox Chapel Publishing) Simple, Practical Designs & Modifications to Extend & Improve the Versatility of Your Small Metal Lathe; Over 200 Photos

  • ...Bore: 1.5"/38 mm. The metal working lathe is pre-installed with a 3-jaw chuck, 4.9"/125 mm in diameter, that can clamp raw materials tight, and a backsplash guard that prevents metal filings..
  • Stable & Reliable Operation: Swing Over Bed: 8"/210 mm.
  • Swing Over Cross Slide: 32"/800 mm. The small metal lathe features a turret post for quick tool change and a center rest for tight pieces holding, making internal cutting, face cutting, and bevel cutting possible..
  • Wide Application: The lathe produces precision work without taking up a lot of room in your shop or garage, making bushings, spindles, prototypes, models, and more..
Check Stock

Learn to Turn, 3rd Edition Revised & Expanded: A Beginner's Guide to Woodturning Techniques and 12 Projects (Fox Chapel Publishing) Step-by-Step Instructions, Troubleshooting, Tips, & Expert Advice

  • ...Bore: 1.5"/38 mm. The metal working lathe is pre-installed with a 3-jaw chuck, 4.9"/125 mm in diameter, that can clamp raw materials tight, and a backsplash guard that prevents metal filings..
  • Stable & Reliable Operation: Swing Over Bed: 8"/210 mm.
  • Swing Over Cross Slide: 32"/800 mm. The small metal lathe features a turret post for quick tool change and a center rest for tight pieces holding, making internal cutting, face cutting, and bevel cutting possible..
  • Wide Application: The lathe produces precision work without taking up a lot of room in your shop or garage, making bushings, spindles, prototypes, models, and more..
Check Stock

Basic Lathework for Home Machinists (Fox Chapel Publishing) Essential Handbook to the Lathe with Hundreds of Photos & Diagrams and Expert Tips & Advice; Learn to Use Your Lathe to Its Full Potential

  • ...Bore: 1.5"/38 mm. The metal working lathe is pre-installed with a 3-jaw chuck, 4.9"/125 mm in diameter, that can clamp raw materials tight, and a backsplash guard that prevents metal filings..
  • Stable & Reliable Operation: Swing Over Bed: 8"/210 mm.
  • Swing Over Cross Slide: 32"/800 mm. The small metal lathe features a turret post for quick tool change and a center rest for tight pieces holding, making internal cutting, face cutting, and bevel cutting possible..
  • Wide Application: The lathe produces precision work without taking up a lot of room in your shop or garage, making bushings, spindles, prototypes, models, and more..
Check Stock

10Pcs Center Drill Bit Set High Speed Steel 4341 Straight Shank Center Drill Bit Combo Drilling Tools 2.5mm for Hole Processing

  • ★High Precise Positioning: This high speed steel center drill bits is mainly used for the prefabricated precise positioning of hole machining, guiding twist drills for hole machining, thereby effectively reducing errors.
  • ★Used for: Use a center drill to make a conical hole for the center of the lathe as a starting point for a standard twist drill. Can be used as a starting hole to prevent the drill bit from deviating from the original route. Used for center cages that need to be processed between parts or workpieces.
  • ★High Performance: This center drill bit is made of high‑quality high-speed steel material, with high hardness and good wear resistance, strong and durable, has a long service life. With good applicability, stability, high processing efficiency, long life expectancy, etc..
  • ★Widely Used: This center countersink drill bit are good for most general purpose applications, which can not only be used on a lathe, but also can be installed at the end of the workpiece in the center of the lathe.
  • ★Note: Please allow slight error due to manual measurement. Thanks for your understanding.Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
Check Stock

VEVOR 27PCS Metal Lathe Gears, Precise Mini Lathe Replacement Gears including Box Gear Set, Slotless Gears, Metal Motor Gears, Variable Gears, Belt Gear for CJ0618 Mini Lathes & Milling Machines

  • 27 PCS Gear Kits: 2 x 80T gears, 1 x 72T gear, 1 x 65T gear, 2 x 60T gears, 1 x 57T gear, 1 x 55T gear, 1 x 54T gear, 2 x 50T gears, 1 x 48T gear, 2 x 45T gears, 1 x 45T gear, 2 x 40T gears, 1 x 35T gear, 1 x 33T gear, 4 x slotless gear, 1 x motor gear, 2 x variable gears, and 1 x belt gear..
  • High-quality Material: The metal lathe gears are made of #45 steel that features impressive plasticity and hardness. They can stand up to wear and corrosion..
  • Precise Gear Teeth: The mini lathe gears have been through a deburring process which left clean and precise gear teeth. With these gears, your lathe can work more efficiently..
  • Easy To Assemble: Follow the lathe instruction or videos online.
  • it is easy for you to install these lathe gears on your mini-lathe..
  • Extensive Compatibility: The metal gear set is compatible with all types of CJ0618 mini-lathe..
Check Stock

CXOYLL Z011A 4-Jaw Chuck for Mini Lathe, Self Centering Mini Lathe Chuck with L-Shaped Wrench, Zinc Alloy Chuck Clamp Accessory Inner Clamping Diameter 1.8-56mm (Silver)

  • ...ize, easy to use. The Mini lathe tools 4 Jaw Chuck has a large clamping range. Outer diameter about 12 mm-65 mm, Inner diameter: about 1.8mm-56mm..
  • 【Woodworking Accessories Self-centering 4 Jaw Lathe Chuck】- The self-centering lathe part contains a delicate oblique angle gear and pinion gears. They contribute to precise processing progress. Widely used for woodworking lathe..
  • 【Scope Applications of the Zinc Alloy Mini Lathe Chuck】- The 4 Jaw design Lathe Chuck is made of high quality zinc alloy material, wear-resistant, strong and durable. Mainly used for mini metal lathe. Since the changeover and setting time is cut, your lathe can work with higher efficiency..
  • 【Practical Lathe Accessories Self Centering Mini Chuck】- The lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • 【Package included】- 1 x Lathe Chuck, 1 x L-shaped Wrench.
  • The 4 Jaw lathe chuck is widely applied to Mini metal lathes for the general turning of shafts and some more delicate materials. It would be the perfect choice for your lathe machine..
Check Stock

MT2 Live Center, 0.0002' High Accuracy 60 Degree Lathe Center with 18mm Shank Diameter for Lathe Wood Metal Turning Tool

  • [Specifications] This MT2 60 degree live center, its runout is 0.0002", the cone shank is 18mm, its hardness is 55-60 hrc.
  • Long-Term Practical: Features excellent dustproof and liquid proof seal while the rolling live center has long service life..
  • Making Material: The rolling lathe live center is made of high quality metal, this rolling lathe live center has high hardness and is durable in use..
  • Working Performance: The rolling lathe live center is professional manufacturing for good working performance..
  • Scope of Application: The rolling lathe live center is suitable for high speed lathe, CNC lathe, and general manual lathe..
Check Stock

4LIFETIMELINES Flaring Tool – Professional Turret Brake Line Flare Tool – 5 Tubing Sizes – Compatible with Stainless Steel Copper Coils

  • 5 TUBING SIZES: The 4LIFETIMELINES heavy duty turret brake line flare tool allows you to create 45 degree highly precise double, single and bubble flares in 5 sizes of tubing, 3/16″, 1/4″, 5/16″, 3/8″ and 4.75mm..
  • COMPATIBLE MATERIALS: This brake flaring tool can work with stainless steel, steel and nickel copper tubing, being a smart and practical solution for brake lines, fuel lines and transmission cooler lines..
  • EASY TO USE: Unlike similar products on the market, this professional flaring tool features a quick-release T handle ensuring fast holder die changeovers for a smooth and user-friendly experience..
  • CONVENIENT TURRET CARRIER: Keep all your dies ready, available and within immediate reach with the convenient turret carrier, which saves you the hassle of groping for small parts or losing them!.
  • PRECISION IS KEY: Keep your brake flares and brake system safe and at optimal length with this highly precise and accurate flaring tool, which requires minimal time, effort and cost!.
Check Stock

BestEquip Metal Lathe, 8\ x 16\ Benchtop Lathe, Mini Metal Lathe 0-2500 RPM Variable Speed, Mini Lathe with 3-Jaw Chuck, Bench Top Metal Lathe, for Various Types of Metal Turning

  • ...s more possibilities for large size or/and heavy workpieces..
  • Professional Compound Rest: The mini lathe machine quick change tool post can achieve positions of internal cutting, face cutting, and bevel cutting by changing the tool post angle and adjusting the compound rest, moving blades freely with feed rod. 4-Way turret tool post (3/8" max tool size)..
  • Supportive & Protective: Soft start, change-over switch for clockwise or counter-clockwise spindle rotation. Equipped with all-metal gears. Steady rest works as end support ensuring chatter-free operation. Backsplash guard included..
  • Adjustable Tailstock: Taper in Tailstock Spindle: MT2. Rotate the lever clockwise to lock the spindle and rotate clockwise to advance the handwheel. To off-set the tailstock for cutting tapers by adjusting the four set screws located on the tailstock base. Travel: compound rest 2-1/8" (54mm), cross slide 3" (76mm)..
Check Stock