Categories

Best Manual Type Solenoid Valve

Appliancemate UHS24 Universal Humidifier Solenoid Valve Replacement 24Volt

  • PARTS NUMBER: UHS24 Universal Humidifier Solenoid Valve Replacement 24Volt.
  • Scope of Application: The UHS24 universal 24 volt solenoid valve can be applied for replacing Aprilaire 4040, General 990-53, Honeywell 320016939-002 and Carrier 4357, widely application, suitable for most type of humidifier.
  • Function: the humidifier solenoid valve can control how much moisture enters into your humidifier to make it possible to maintain proper humidity levels throughout your home.
  • PREMIUM QUALITY – The replacement part is made from durable high quality material and well-tested by the manufacturer.Non original aftermarket part. Fits OEM Standards!.
Check Stock

3/4\ Brass Electric Solenoid Valve,  110V Air Valve Normally Colsed for Water Air Gas Fuel Oil 2W-200-20

  • High quality 3/4inch Brass Electric Solenoid Valve： Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc.  .
  • Normally closed electric solenoid valve: 2 way solenoid valve,Model: 2W-200-20.
  •   3/4" NPT port,   Working temperature range: -5 ℃~80 ℃.
  •  Operating  Pressure: MIN.0kg/cm - MAX.10kg/com  .
  • This solenoid valve 110v was manufactured with a VITON seal,two-way inlet and outlet ports with standard female thread NPT connectionsm and heat and oil resistant Viton gasket.   .
  • Applicable Irrigation Controls (garden, Farm,etc.), Liquid Controls ( Pipeline, Artificial River Etc. and Air Controls ( Lab, Factory, Etc.) -3/4 inch Brass Electric Solenoid Valve Also known as110v solenoid valve,electric solenoid water valve,brass liquid solenoid valve. .
  • This valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, We will gladly replace it..
Check Stock

1\ HEAVY DUTY HIGH FLOW IN-LINE COMPRESSED AIR PRESSURE REGULATOR 180 CFM

  • CO2 pressure regulator has two valves to independently measure flow rate and remaining CO2 tank contents (CO2 tank sold separately).
  • Valves have dual-scale readings in psi and kg/cm.
  • Needle valve flow control provides precise flow adjustment and measurement.
  • Includes flow regulator, needle valve, electronic solenoid, and bubble counter.
  • NOTE:Kindly refer to the Regulator Set Up Procedure provided as a PDF manual in the product description section.
Check Stock

Beduan 12V Plastic Water Electric Solenoid Valve Normally Closed 1/2

  • Voltage: DC 12V. Thread Size : 1/2" G. Working Temperature : 32-212°F ,Working Pressure : 0.01~0.8Mpa.
  • The electric solenoid valve is made of high quality plastic and brass material, with long serving life ..
  • If your central heating or irrigation sprinkler system isn't working correctly it could be down to the solenoid valve. Repair a faulty valve with this brand new, fast acting 12V DC diaphragm-style replacement..
Check Stock

Wyin CO2 Regulator Aquarium 12V DC CO2 Solenoid Pressure Adjustable with Big Dual Gauge Display, Bubble Meter can be Connected, Check Valve, Aquarium Co2 Kit Fits Two Standard US Tanks

  • 【Peace of Mind After Sale】 In order to improve your sense of the use of our product, we provide an additional set of accessories (copper tube+spring iron) for the solenoid valve of this product. If your solenoid valve reaches the service life, you can replace it yourself to extend the service life of the product. If you have any questions, please feel free to contact us!.
  • 【Can be Used for Multiple Aquariums】The CO2 regulator aquarium kits is equipped with multiple bubble meters that can be connected to multiple aquariums at the same time. It is simple and convenient to operate. The module of the bubble counter can be purchased in this shop.
  • 【New upgrade bubble counter】As the water of the co2 generator system bubble counter evaporates quickly, In view of this, we have carried out a new upgrade to the bubbler. The bubble gauge is equipped with a syringe, which can be directly used to inject water (there is a one-way valve inside the generator, only into the water without leakage). And you can also add water during use, no need to close the air outlet, no need to remove the air tube, convenient for your use.
  • 【Waterproof Solenoid Valve 】 Our co2 solenoid valve adopts the new integrated injection molding technology, which is waterproof and do....
Check Stock

Aquarium CO2 Regulator Big Dual Gauge Display with Bubble Counter and Check Valve and Updated 12V DC Solenoid Fits Standard US Tanks

  • Big Dual Gauge Display - 1.6 inch big dual gauge display with clear tick marks and numbers allows you clearly and accurately read the pressure(0-3500....
  • Updated Split-type Solenoid - Newest split-type solenoid dual stage valve for added safety and reliability. Low power consumption solenoid with low....
  • High Precision Structure - This is a great regulator for the aquarium. The built in counter with check valve function on the regulator is adjustable....
  • Strong Compatibility - The CO2 aquarium regulator is compatible with most brands of high density tubing to inject your aquarium with CO2 quickly and....
  • What's in Your Package? - 1 x DoubleSun big dual gauge regulator.
Check Stock

DJ TRANS PARTS – 45RFE 545RFE 68RFE Solenoid Pack – Quality and Tested OEM product – Compatible with Dodge, Chrysler, & Jeep – Years 2004 and Up | Warranty Included with Purchase (RENEWED)

  • COMPATIBLE WITH – Here is a list of products that is compatible with this item. Feel free to google the part numbers as well to ensure it fits your vehicle. Compatible with Chrysler 300 2010-11 Valve Body Solenoid, Chrysler 300C 2010-11 Valve Body, Chrysler Aspen 2007-09 Valve Body Solenoid, Dodge Avenger 2010-11 Valve Body, Dodge Challenger 2010-11 Valve Body, Fit for Dodge Charger 2010-11 Valve Body Solenoid, Dodge Dakota 2004-11 Valve Body Solenoid, Dodge, Durango 2012 Valve Body Solenoid..
  • PRODUCT IS REMANUFACTURED OEM PART– All of DJ Trans Parts items are original OEM products. That being said, they are not brand new but refurbished. They are remanufactured and tested to ensure they work. This means you are getting the actual transmission, valve body, solenoid kit, etc. that your car needs. You can ensure our products will work with OEM parts..
  • PART NUMBERS - Here are the related part numbers of this item - 5RFE 545RFE 68RFE Transmission Solenoid Block Pack.
  • INSTALLATION VIDEOS ONLINE - Searching related installation video on the internet will be recommended. You can find these videos on Google and searching the part numbers online. We recommend to always wear eye protection and start with installation tools..
Check Stock

1/4inch DC 12V 2 Way Normally Closed Electric Solenoid Air Valve

  • .WIC Valve is compatible with SMC valves. Has two holes in the bottom and can be mounted in any position..
  • .2ACK Series valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum)..
  • .Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized..
  • .This solenoid valve has one G1/4" inch DN8 inlet and one G1/4" inch DN8 outlet port. Valve stays close when the coil is de-energized- and it opens when energized..
  • .1/4inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Air Valve WIC Valve 2ACK series 2-way normally closed solenoid valve is to control On/Off of air and inert gas..
Check Stock

Surwit 15810-RAA-A03 VTEC Solenoid Spool Valve Assembly with Oil Pressure Switch & Gasket Compatible with Honda Accord Element CR-V 2.4L Civic Acura RSX 2.0L Part# 15810-RAA-A01 15810-PPA-A01

  • The VTEC system provides the engine with valve timing optimized for both low and high RPM operations. The VTEC solenoid actually allows oil to flow to the internal galleries of the overhead camshaft. This means that the housing of the solenoid is holding back full engine oil pressure. A spool solenoid valve can direct the flow of hydraulic fluid. The valve is made up of spools that rotate or slide to block and open channels in a hydraulic system..
  • This VTEC Solenoid Spool Valve Fits for 2003 - 2011 Honda Element 2.4L, 2002 - 2009 Honda CR-V 2.4L, 2003 - 2007 Honda Accord 2.4L, 2002 - 2006 Acura RSX 2.0L, 2002 - 2005 Honda Civic 2.0L..
  • Customers can find the product you need accurately according to the OE number. OE part number: 917-224, 15810RAAA03, 15810RAAA02, 15810-RAA-A01, 15810PPAA01, 15810PNEG01, 15810-RAA-A03, 917224, 15810-PNE-G01, 15810-RAA-A02..
  • While a VTEC solenoid rarely goes bad, problems with VTEC not engaging properly are extremely common. Most of the time incorrect wiring is to blame, but occasionally something even smaller is the culprit. When a solenoid is bad, may mean the solenoid's plunger is either mechanically stuck in a closed position and therefore always making contact which may eventually cause the starter motor to burn its w....
Check Stock

HNARL Solenoid Lowering Valve 66465GT 66465 Genie Parts for Genie Vertical Mast Lift GR12 GR15 QS12R Scissor Lift GS1530 GS2046 GS3246

  • Part Name:20 Volt Solenoid Lowering Valve.
  • Application:Control Valve used for Vertical Mast Lift Models GR-12, GR-15, GR-20, GRC-12, QS-12R, QS-12W, QS-15R, QS-15W, QS-20R, AND QS-20W. Scissor Lift Models GS-1530, GS-1532, GS-1930, GS-1932, GS-2032, GS-2046, GS-2632, GS-2646, GS-3246..
  • Description:VALVE, 20 VOLT, NC SOLENOID, MANUAL.
  • HNARL provided 100% satisfaction. If there are any problems with the purchase, please feel free to contact us, we will help to fix the problem within 24 hours..
Check Stock

SkyTech AF-LMF/R Remote Controlled Fireplace Gas Valve Control Kit

  • Millivolt safety pilot kit with remote for use with 18 to 30 inch gas logs.
  • Manual On/Off gas valve kit with On/Off remote control.
  • 225 degree rated valve with exclusive safety seal within the gas valve.
  • Includes quick mount pilot assembly, damper clamp, valve, solenoid, flex line, and remote.
  • For use with Natural Gas (LP conversion kits available).
  • Valve kit measures 3 3/4″ W x 4″ D 2 3/4″ H.
Check Stock

Power Speed Steering Valve Related Solenoid A2214600184 Fit for Benz C‑Class (W204) 2008‑2014

  • ...ce the OEM number as a reference: A2214600184, which is made strictly according to the original materials and specifications, and is completely suitable..
  • ☀☀ Applicable to: Fit for Benz C-Class (W204) 2008-2014, direct replacement, (see detailed description below)..
  • ☀☀ Professional Manufacturing: The steering solenoid valve is professionally manufactured with high precision and high reliability. The solenoid valve is durable and stable in quality, and can be used with confidence..
  • ☀☀ Easy to Install: This speed sensing steering solenoid valve is easy to install, remove and replace the old valve. No need for complicated tools, professional manufacturing ensures that we can provide you with higher quality products, which you can buy easily..
  • ☀☀ Standard Specifications: It meets strict quality control standards and is reliable in use. Manufactured according to original specifications. Manufacture in strict accordance with factory quality control standards..
  • ☀☀ Professional Manufacturing: The steering solenoid valve is professionally manufactured with high precision and high reliability. The solenoid valve is durable and stabl....
Check Stock

Electric Solenoid Air Valve G1/8 Vacuum Solenoid Valve Sealing Reduce Wear Resistamt Copper Coil for Industrial Use

  • COPPER FULL TURN COIL: Solenoid valve for a time use is not easy to hot, possess durable life, more durable than ordinary solenoid valve.
  • WEAR RESISTANT: Between solenoid valve internal moving parts has excellent softening oil, effectively reduce wear between parts.
  • RELIABLE SEALING: Solenoid valve using excellent sealing , to ensure that the product performance is stable and reliable, lasting.
  • WIDE APPLICATION: Used for rail transport, vehicle manufacturing, ship engineering, mechanochemistry, mining equipment, biomedicine.
  • AVIATION CAST ALUMINUM VALVE BODY: Die cast aluminum valve body with solid material, the is finely polished, the inner wall is also polished several times, to ensure that the interface is without burr and no air leakage.
Check Stock