Categories

Best Manufacturer Of Ntc Thermistor

Thetford (618548 Thermistor Assembly

  • 003cb003ePrice For:003c/b003e Each 003cb003e Thermistor Type:003c/b003e NTC 003cb003e Resistance:003c/b003e 5ohm 003cb003e Thermistor Tolerance:003c/b003e -15% to +15% 003cb003e Thermistor Case Style:003c/b003e Radial Leaded 003cb003e No. of Pins:003c/b003e 2 003cb003e Dissipation Constant:003c/b003e 32.4mW/°C 003cb003e Leaded Process Compatible:003c/b003e Yes 003cb003e Mounting Type:003c/b003e Through Hole 003cb003eRoHS Compliant:003c/b003e Yes.
Check Stock

uxcell NTC Thermistors Resistor MF52-103/3435 10K Ohm Inrush Current Limiter Temperature Sensor Pack of 40

  • 【Quality】 - Directly Inserted Negative Temperature NTC Thermistors have large material constant, large B value, with small residual resistance.Thermal shock resistance, with wide range of operating temperature..
  • 【Feature】 - The NTC thermistors are reliable and stable, with wide range of over-current control..
  • 【Advantage】 - With small size and large power, NTC thermistors have strong capacity to inhibit surge current..
  • 【Application】 - NTC Thermistor is widely used for controlling the inrush current of motor, heaters, bulb voltage stabilizer, electronic energy-saving lamp, etc..
Check Stock

Adafruit 259 , USB Li-Ion/LiPoly Charger, v1.2

  • Comes assembled and tested with a free bonus jst cable.
  • For charging single lithium ion/lithium polymer.
  • Chip supports a 10K ntc thermistor which we have stuffed as a plain 10K. For people who require temperature monitors (using high charge rates), remove the 10K and solder in the thermistor in its place.
Check Stock

FYSETC 3Pcs Upgrade HT-NTC100K 3950 XH2.54 2 Pin Cartridge Thermistor Sensor Ender 3 V2 Hotend Parts High Temperature 250 Degrees for Ender 3 5 Pro CR10 A8 Maker Pro Heater Block

  • Upgrade HT-NTC100K 3950 Thermistor: Pack of 3Pcs. Note: Temperature measurement head cylinder diameter is 3mm, length 15mm, The connector is 2pin....
  • The temperature measurement: -20 °C ~ +250 °C for a longer lifecycle, sometimes can reach +300℃(but not recommand to use it long time)can replace....
  • Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement. If need a....
  • HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line....
Check Stock

Ametherm SL32 1R030 (Pack of 2) NTC Thermistor, SG379 HVAC, Inrush Current Limiter 1 Ohm Ohm ±20% 1.18\ (30mm)

  • 003cb003ePrice For:003c/b003e Each 003cb003e Thermistor Type:003c/b003e NTC 003cb003e Resistance:003c/b003e 1ohm 003cb003e Thermistor Tolerance:003c/b003e -20% to +20% 003cb003e Thermistor Case Style:003c/b003e Radial Leaded 003cb003e No. of Pins:003c/b003e 2 003cb003e Dissipation Constant:003c/b003e 32.4mW/°C 003cb003e Leaded Process Compatible:003c/b003e Yes 003cb003e Mounting Type:003c/b003e Through Hole 003cb003eRoHS Compliant:003c/b003e Yes.
Check Stock

FYSETC Prus i3 MK3 Upgrade Hotend Parts HT-NTC100K Thermistor Sensor High Temperature +250 Degrees 2 Pins for 3D Printer MK3 Extruder Heater Block 3Pcs

  • Upgrade HT-NTC100K Thermistor: package temperature measurement. Temperature measurement head cylinder diameter 3mm, length 15mm, can be used with the....
  • The temperature measurement: -50 °C ~ +250 °C for a long lifecycle, sometimes can reach up to +300℃ for a short time using, can replace the....
  • The Customized Terminal Connector( XH2.54 2P with buckle) is specially for MK3/MK3S prus einsy boards, so please check before ordering. If for Prus....
  • HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line....
  • Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement..
Check Stock

WINSINN HT-NTC100K Thermistor Sensor Ender 3 v2 Upgrade 3x15 3950 XH2.54 2Pin Compatible with Ender 3 5 Pro CR6 CR10 Series 3D Printer Hotend Pack of 5Pcs

  • ✔️Upgrade HT-NTC100K Thermistor: package temperature measurement. Head diameter: 3mm, Head length: 15mm.
  • ✔️The temperature measurement: -50 °C ~ +350 °C, can replace the original K-type thermocouple temperature. Fit for printing high-temperature....
  • ✔️Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement..
  • ✔️HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line....
  • ✔️Made by WINSINN. Can be used with the New Sensor Heater Block (Temperature measurement can be up to 350 degrees)..
Check Stock

Wholesale Sensors Replacement for Norcold 618548 Thermistor Assembly 12 Month Warranty

  • The NTC thermistors Value: 3D-25,5D-7,5D-9,5D-11,5D-15,8D-9,10D-9,10D-11,20D-9,47D-15.
  • Characteristic: Small size and large power，large B value with wide range of operating temperature..
  • Easy to Sort: Each model has a small bag and a mark. Box also has a marked model for easy identification..
  • Easy to store: Provide a high-quality box for easy management and storage..
  • More values: Provide 10 commonly used NTC Thermistor Resistors values to help you more convenient for controlling the inrush current of motor, heaters, bulb voltage stabilizer, electronic energy-saving lamp, etc..
Check Stock

Wholesale Sensors Replacement for Whirlpool 2188819 Thermistor 12 Month Warranty

  • The NTC thermistors Value: 1K ohm, 2K ohm, 5K ohm, 10K ohm,20K ohm, 50K ohm, 100K ohm, 200K ohm, 500K ohm, 1M ohm.
  • Characteristic: Small size and large power,large B value with wide range of operating temperature..
  • Easy to Sort: Each model has a small bag and a mark. Box also has a marked model for easy identification..
  • Easy to store: Provide a high-quality box for easy management and storage..
  • More values: Provide 10 commonly used NTC Thermistor Resistors values to help you more convenient for related equipment with temperature measurement and controls thermal protection circuits in various family appliances.
Check Stock

Fielect NTC Thermistor Resistors 8D-20 6A 8 Ohm Inrush Current Limiter Temperature Sensors Pack of 5

  • High sensitivity. Quick response. Compact structure.
  • Easy installation, wide temperature range and good stability.
  • High reliability. Can provide different R.B value products.
  • Package includes: 2* NTC 3950 100K Thermistor.
Check Stock

BIGTREETECH 3D Printer Part 2 in 1 Out Hotend Multi Color Dual Bowden Extruder Full Kit with Silicone Sock for Titan MK8 Bulldog Extruders (24V Black Color)

  • Select high-quality Aluminum alloy 6063 material,and use refined sandblasting oxidation treatment of product shell to improve the surface texture.
  • The heat dissipation efficiency is increased to 40% compared with the existing similar products which can effectively reduce and avoid the occurrence of the throat plug.
  • The weight of the Nozzle is at least 20-30% lighter than that of the same type Of the products and the printing accuracy and printing quality can be effectively improved.
  • The new design can ensure that the size change of the total height of the products is less than 0.5-1.0mm, which is beneficial to mass production.
  • Hotend is compatible with both HT-NTC100K and NTC100K thermistor.
Check Stock

KOKISO NTC Thermistor Resistors 10 Values 81 PCS Inrush Current Limiter Temperature Sensors Assorted Kit Assortment 3D-25,5D-7,5D-9,5D-11,5D-15,8D-9,10D-9,10D-11,20D-9,47D-15

  • The NTC thermistors Value: 3D-25,5D-7,5D-9,5D-11,5D-15,8D-9,10D-9,10D-11,20D-9,47D-15.
  • Characteristic: Small size and large power，large B value with wide range of operating temperature..
  • Easy to Sort: Each model has a small bag and a mark. Box also has a marked model for easy identification..
  • Easy to store: Provide a high-quality box for easy management and storage..
  • More values: Provide 10 commonly used NTC Thermistor Resistors values to help you more convenient for controlling the inrush current of motor, heaters, bulb voltage stabilizer, electronic energy-saving lamp, etc..
Check Stock

LG EBG60663207 Genuine OEM PTC Thermistor Assembly for LG Refrigerators

  • This LG PTC Thermistor Assembly is a genuine OEM (Original Equipment Manufacturer) part manufactured to exact specifications.
  • Replacement LG brand Refrigerator PTC Thermistor Assembly or Positive Temperature Coefficient Thermistor starts the compressor motor.
  • LG EBG60663207 Refrigerator PTC Thermistor Assembly Is also called the Compressor Overload and Start Relay.
  • High quality LG OEM EBG60663207 Refrigerator PTC Thermistor Assembly is manufactured with premium materials for durability and exact fit, be sure to....
  • Life's Good when choosing Genuine LG OEM Factory parts for your LG appliances.
Check Stock