Categories

Best Manufacturer Pipe

Imported Small Meerschaum Pipe - CLAW holding Lattice Bowl

  • Mini Full Bent White Lattice Hand Carved Turkish Meerschaum Pipe.
  • Hand-carved White Turkish Meerschaums are a must for any collector.
  • Miniature pipes are approximately 4½" in length.
  • Each pipe will vary depending on the bowl carve and the stem color. Bowl size 1-½".
  • Each pipe has an acrylic stem and includes its own individually fitted protective case.. Manufacturer's Lifetime warranty.
Check Stock

FORMUFIT F012CRX-UV Cross PVC Fitting, Furniture Grade, 1/2\ Size, Clear

  • FOUR DEEP SOCKETS: Connect up to four (4) PVC pipe segments in a cross configuration. 20% Deeper sockets than plumbing fittings..
  • WORKS WITH 1/2" SIZE PVC PIPE: Fits 1/2" Size PVC Pipe, which has an outside diameter of 13/16" (0. 840"). Uses either off-the-shelf 1/2" Size pipe or FORMUFIT Furniture Grade PVC pipe..
  • MADE TO LAST, EVEN UNDER LIGHTS: UV resistant PVC material resists indirect sunlight and fluorescent lighting degradation. No yellowing, discoloration or cracking unlike sub-par PVC fittings.
  • NO MARKS, LOOKS GREAT: Glossy, clean unmarked surfaces for a professional look with tapered ends on each socket end to allow a smooth transition from the pipe to the fitting. Will not snag clothing or pet hair like plumbing grade PVC fittings.
  • COMPLETEMENTS YOUR DESIGN: Maintains the same socket depth, fit, finish and color as all other FORMUFIT products.
  • MADE IN USA: Manufactured in the USA with a 1 year manufacturer.
Check Stock

V-Twin 30-0576 - Six Gun Exhaust Pipe End Set

  • Installation method: remove the old one and install the new one..
  • Note: We are a professional manufacturer of auto parts, if you have any questions, you can contact us at any time, we will answer you within 24 hours..
  • Bright decoration:The surface is polished, and the decorates your exhaust pipe, used to reduce the damage of automobile exhaust pipe due to long-term sewage and exhaust gas, and extend the life of exhaust pipe..
  • Durable:protect your original pipe from the sun and rain,avoid and deformation.Increase exhaust pressure and reduce exhaust noise effectively..
  • Replacement: Easy to use, no damage to the car, not easy to fall off, firmly installed on the car..
Check Stock

Guide Gear Outdoor Stove Accessory Bundle

  • EXHAUST EXTENSIONS: Extend the exhaust of your outdoor wood stove with this 2 piece pipe extension set.
  • ADD ALMOST 4 FEET: Each pipe measures 5.5 inches in diameter and 21 inches long, extending your pipe by almost 4 feet.
  • THICK METAL: Crafted from durable metal designed to handle the heat.
  • Black finish prevents rust corrosion from exposure.
  • SIZED TO FIT: Compatible with the Guide Gear Large Outdoor Wood Burning Stove (item 718708.
  • Dimensions (Diam. x L): 5.5 x 21 inches (each).
  • Manufacturer warranty: Lifetime warranty.
Check Stock

ISTUNT Universal 51mm Slip-on Modified Motorcycle Exhaust Pipe Muffler

  • ✔ Dirt Bike Muffler Universal for Dirt Bike, Street Bike, Scooter, ATV, Quad and Any Other Bike with Pipe Diameter 38-51 MM..
  • ✔ Slip On Exhaust Fits for 400cc and Below Displacement. Removable DB Killer Offers Difference Sound Effect..
  • ✔ Attention: In Daily Use, Try to Avoid Water Entering the Exhaust Pipe and Keep the Exhaust Pipe Clean. Do Not Slam the Accelerator on the Spot for a Long Time and Resist Driving under Heavy Load, Which Will Cause the Color of the Muffler to Turn Blue or Yellow..
  • ✔ Attention: If the Exhaust is Modified, the Oil from the Carburetor Will Be Sprayed on the Exhaust Pipe When Riding a Motorcycle. If It is not Cleaned for a Long Time and Encounters High Temperature, the Exhaust Pipe Will Spout Fire or Even Burn..
  • ✔ The Body is Made of Stainless Steel Covered with Carbon Fiver Color Vinyl that Make the Exhaust Looks Luxury and Attractive. Manufacturer Warranty for 90 Days from Date of Purchase..
Check Stock

JY Performance 5PCS 2.5 T304 Stainless Steel Custom Exhaust Pipe Kit Tubing Mandrel Bend Pipe Straight & U-Bend Universal

  • This Universal T304 Stainless Steel Custom Exhaust Kit Made of High Quality T304 Stainless Steel with Computerized Mandrel-Bends for Strength and....
  • 2 X 15'' Straight Pipes, 1 X 180° Pipe, 1 X 90° Pipe, 1 X 45° Pipe..
  • Each 2.5" Smooth Mandrel Bent Tube Is Expanded On One End To Allow Easy Slip-fit Installation..
  • WE ARE DIRECT MANUFACTURER, SO WE GOT THE LOWEST PRICE AND BEST QUALITY..
  • Best Value T304 Stainless Steel Exhaust Pipe Kit..
Check Stock

Dektite Premium #7 Red Silicone Metal Roof Pipe Flashing, High Temp, Square Base, Pipe OD 6' to 12'

  • Flashing Base is 18" by 18" - Pipe Boot Fits 6" To 12" Outside Pipe Diameter.
  • Continuous Service High Temperature Ranges of -58F to 392F (Silicone).
  • If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack.
  • Use for Stove Pipes, Chimneys, Plumbing, Heating, Air Conditioning, Electrical, and Exhaust Vents.
  • 20 Year Manufacturer's Warranty Against Manufacturing Defects.
Check Stock

FORMUFIT F034CRX-UV Cross PVC Fitting, Furniture Grade, 3/4\ Size, Clear

  • FOUR DEEP SOCKETS: Connect up to four (4) PVC pipe segments in a cross configuration..
  • WORKS WITH 3/4" SIZE PVC PIPE: Fits 3/4” Size PVC Pipe, which has an outside diameter of 1-1/16" (1. 050”).
  • MADE TO LAST: : UV resistant PVC material resists fluorescent lighting degradation. Lasts for years in indirect sunlight without yellowing, discoloration or cracking.
  • NO MARKS, LOOKS GREAT: Glossy, clean unmarked surfaces for a professional look with tapered ends on each socket end to allow a smooth transition from the pipe to the fitting. Will not snag clothing or pet hair like plumbing grade PVC fittings.
  • COMPLETEMENTS YOUR DESIGN: Maintains the same socket depth, fit, finish and color as all other FORMUFIT products.
  • MADE IN USA: Manufactured in the USA with a 1 year manufacturer.
Check Stock

Certified Appliance Accessories CERT77300 Universal Gas Line Connector Kit, 4 Feet, gray

  • 4ft heavy-duty stainless steel connector with 5/8” MIP (Male Iron Pipe) x 5/8” MIP on each end.
  • Two 5/8" OD (Outer Diameter) flare x 1/2" MIP tapped with 3/8" FIP (Female Iron Pipe) adapters.
  • 5/8" OD flare x 3/4" MIP tapped with 1/2" FIP adapter.
  • Supplies up to 106,000 BTU (British Thermal Unit)/hour.
  • Includes one 4-Feet heavy-duty stainless steel connector, one 5/8-Inch od flare x 1/2-Inch m.i.p. (tapped with 3/8-Inch f.i.p.) adapter.
Check Stock

Premium Industrial PVC Pipe Schedule 80 Grey 1 Inch (1.0) Grey/PVC / 5 FT

  • ...r parts and accessories when you hold them. This is real industrial pipe for custom furniture and lamps, or the original use of plumbing applications in gas, oil and air. Accept no substitutes. Additional pieces and accessories are available for your custom fixture projects and expansions. Plug and play as desired. Manufacturer part number 362 112x18-4..
  • Because these are authentic parts, cleaning and sealing is required prior to use to prevent rust. Each pipe comes coated in a light industrial grease to prevent rust. For your convenience we include a comprehensive sheet detailing cleaning and sealing methods. We recommend wearing gloves during the cleaning process to keep your hands grease free. You can paint the pipe to match any project for a perfectly coordinated décor..
  • No Stickers! Unlike other pipes and fittings, Pipe Décor products are sticker and label free so there’s no need to use harsh chemicals to remove unwanted stickers. We want your pipe creations to be as beautiful and unblemished as possible!. Set includes four-1 1/2” x 18” pipes with a standard industrial steel grey finish – known as “black” in the plumbing industry. Meets ASME and ASTM standards. 2 Year Limited Warranty..
Check Stock

Intake Pipe, Fydun Intake Repair Hose Air Intake Hose for Mercedes-Benz W172 SLK200 SLK250 W204 C180 C200 C250 W212 E200 E250 2710901929 A2710901629 A2711801819 Intake Piping

  • 【High Quality】 Intake Pipe Hose Kit Made of high-quality rubber material, it is resistant to high and low temperatures and is extremely durable, our product has impeccable durability performance, waterproof, dust-proof, anti-rust, , wear-resisting, anti-strike, anti-scratch and colorfast..
  • 【Manufacturer number】The replacing manufacturer part number/OE number for reference is : A2710901629, A2710901729, A2710902029, A2711801819, 2710901629, 2710901729, 2710902029, 2711801819.
  • 【Quality characteristics】Professional manufacturing, air intake hose has stable characteristics and performance.With exquisite workmanship, our product makes the exhaust work more smoothly, and improve the power function, ensuring you a comfortable and exciting riding experience..
  • 【Simple Installation】This intake Pipe Can Enhanced filter protection, improved throttle response and engine performance, flexible, scalable and easy to install，directly replace your broken one, convenient to use.
  • 【Long Life】The intake pipe repair was made of high quality material, wear-resistant and available for long service life..
Check Stock

FORMUFIT F114CRX-UV Cross PVC Fitting, Furniture Grade, 1-1/4\ Size, Clear

  • Connect up to four (4) PVC pipe segments in a cross configuration..
  • Fits 1-1/4” Size PVC Pipe, which has an outside diameter of 1-5/8” (1.660”).
  • UV resistant PVC material resists fluorescent lighting degradation. Lasts for years in indirect sunlight without yellowing, discoloration or cracking.
  • Glossy, clean unmarked surfaces for a professional look with tapered ends on each socket end to allow a smooth transition from the pipe to the fitting. Will not snag clothing or pet hair like plumbing grade PVC fittings.
  • Maintains the same socket depth, fit, finish and color as all other FORMUFIT products.
  • Manufactured in the USA with a 1 year manufacturer warranty.
Check Stock

51mm Motorcycle Exhaust Pipe Muffler Silencer, Universal Stainless Steel DB Killer Noise Eliminator Sound Eliminator For Most of Motorcycle

  • 【Lower Noise Muffler】This muffler can effectively reduces DB sound levels from louder exhaust systems..
  • 【High Performance】This exhaust pipe is crafted by professional manufacturer. The new motorcycle exhaust pipe which makes the exhaust smoother and improve the power.Effectively reduces DB sound levels from louder aftermarket exhaust systems. Fashion design style, a great accessory to dress up your rides..
  • 【Good Quality】This exhaust pipe is made of high grade stainless steel,it is of high temperature, superior longevity, strong practicability and durable in use..
  • 【Good Looking】Exquisite workmanship and fashionable design, it will enhance the look of your motorcycle.Exquisite workmanship and fashionable design will enhance the look of your motorcycle..
  • 【Fitment】This is a universal removable Exhaust Pipe Muffler Insert DB Killer with premium quality. The muffer silencer is fit for the most motorcycles with 51mm diameter models..
Check Stock