Categories

Best Marble Railing

Yaheetech Patio Deck Tiles Interlocking Wood Composite Deck Wooden Flooring Deck Tiles 12 x 12in Fir Wood Indoor&Outdoor Brown 55pcs

  • Specially for End Post - This cable railing kit is a great solution for posts up against a wall that you can't reach from behind, also ideal for single drilled end posts and corner posts to realize one-post corner solution. This deck railing hardware is installed by simply inserting it into the hole of drilled post and flipping the toggle.
  • Multi-Angled and Wide Adjustment - This tension wire kit can be rotated from 0-180 degrees for both horizontal and angled sections. This turnbuckle also has a wide adjustable range of up to 40ft in a straight run, making it much easier for beginners to install a cable railing system.
  • High Quality- The cable railing kit is made of T316 stainless steel, which is excellent in rust resistance and weather protection. Suitable for both indoor and outdoor, even coastal applications.
  • Pre-designed system- This product belongs to the SpaceSaver cable railing system, in which you can refer to how to build a cable railing project. It includes: Stainless steel side-mounted posts Muzata PF01.
  • Handrails (HT10-flat, HT20-round, HT30-thin).
  • cable cutter and hydraulic crimper CK12).
  • Adhesive washer CR74. For further information please scroll down to" product description" or....
Check Stock

Steel DN Mate 100 Pack T316 Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8" Steel Cable Railing Kit, Cable Railing Hardware, DIY Wood Baluster, Wrench Include, DM50

  • New design of deck cable railing kit, clean and elegant. This deck railing kit made of stainless steel T316 material, anti-rust, water, and corrosion, marine Grade, good for indoor or outdoor usage. It is suitable to DIY your stair railings, porch railing, terrace railings, and deck railings, With our new made wrench, installation becomes much easier..
  • This deck railing hardware fits 1/8" OD cable of the cable deck railing system. The thread lag screws are designed for timber/wood posts. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. This design can make wire deck railing hardware fits last longer..
  • Length of cable should be 1-1/2" shorter than wood surface distance（as shown in pic.4).
  • if you want to build a high-quality cable railing system, standard 1/8" (OD) cable which was made of T316-stainless steel is recommended..
  • The lag screws could be drilled into wood to adjust the tightness without an extra turnbuckle or tensioner. Deck and Stair Cable railing system is not only simple but also won't block your view. A simple cost-effective cable ra....
Check Stock

Muzata 40Pack Cable Railing Kit Protector Sleeve Adhesive Grommet Protective for 1/8\ 5/32\ 3/16\ Wire Rope Wood Metal Posts T316 Stainless Steel Cable Deck Stair Railing CR91,CP2

  • Clean Finished Look - The protector sleeves could be used on INTERMEDIATE posts to cover ugly holes and present a clean look of your deck railing. They can also work with cable railing kit on END posts to for a neater look. Please note that adhesive sleeves are ONLY for decorative function, not for load-bearing applications. Package includes: 40pcs washers and 80pcs adhesives (Extra adhesives as backup and do not throw them away).
  • SPEC&Application - ID-3/16"(5mm),OD-3/4"(19mm),thickness-1/32"(1mm). These adhesive washers work for both wood and metal posts, fit 1/8" 5/32" 3/16" cable on level, fit 1/8" 5/32" cable at 30°angle. Please check the image to find the compatibility table for further models. Cable railing kit CR73 is recommended to work with CR91 for wood invisible cable railing system.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
  • Pre-Designed System - We pre-designed a CableGenie wood cable railing system to help you get a fully customized project, which includes cable railing kit CR73,1/8” wire rope WR02, adhesive sleeve CR91, drill guide CT19, crimper and cutter CT01, socket wrench ....
Check Stock

Saiksa Black Cable Railing Hardware, Steel Cable Railing Kit for 1/8" Stainless Steel Cable Railing System, for Metal & Wood Post, Turnbuckle Tensioner and Fixed Terminal 10 Pairs

  • Hidden - With this cable railing hardware, it can be hidden in wooden or metal post railings to give a nice looking cable railing..
  • Cool Black - This cable railing kit is plated with a high quality black coating, which is wear-resistant and durable, will not fade, cool black beautiful..
  • Rust Resistant - These cable railing hardware are made of T316 stainless steel, which is rust resistant and durable for indoor and outdoor use..
  • For 1/8" Cable - This cable railing kit for 1/8" cable railing system, for metal and wood posts..
  • Items Include - 10pcs Turnbuckle Tensioners, 10pcs Fixed Terminals, 1 hex wrench..
Check Stock

Muzata 40Pack Cable Railing Kit Protector Sleeve Adhesive Grommet Protective for 1/8\ 5/32\ Wire Rope Wood Metal Posts T316 Stainless Steel Cable Deck Stair Railing CR66,CP2

  • Clean Finished Look - The protector sleeves could be used on INTERMEDIATE posts to cover ugly holes and present a clean look of your deck railing. They can also work with cable railing kit on END posts to for a neater look. Please note that adhesive sleeves are ONLY for decorative function, not for load-bearing applications. Package includes: 40pcs washers and 80pcs adhesives (Extra adhesives as backup and do not throw them away).
  • SPEC&Application - ID-3/16"(4.5mm), OD-5/8"(16mm), thickness-1/32"(1mm). These adhesive washers work for both wood and metal posts, fit 1/8" 5/32"cable on level applications, ONLY fit 1/8" cable on 30°angle. Please check the image to find the compatibility table for further models. Cable railing kits Muzata CR26 is recommended to work with CR66 to let your cable railing system look neater.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
  • Pre-Designed System -We pre-designed a WoodHidden cable railing system to help you get a fully customized project, which includes cable railing kit CR26, angled beveled washer CR60, 1/8” wire rope WR02, adhesive sleeve CR66, protector sl....
Check Stock

Muzata 30 90 Degree Angle Drill Guide Cable Railing Kit Stair Visible Drilling Template Drill Jig 4 Sizes for Straight and Angled Hole Lag Screw for Wood Post CT09,CT1

  • Accurate and Multi-Angle - This cable railing drilling guide jig dowel allows you to drill 90 degree horizontal vertical straight holes and 30 degree angled holes for the wood railing post. You can add a whole new level of accuracy with this drill guide jig when drilling railing post holes with your hand drill. Package includes: 1pc drill guide.
  • Various hole sizes - This cable railing drill template guide jig offers 4 different size guide track holes (fit 3/16”,1/4”, 5/16”,3/8” drill bit), compatible with most cable railing kit hardware. The hole drilled by 1/4" drill fit most of 1/8" cable railings lag screws. You can fix the steel sleeves by tightening the set screws to prevent the steel sleeves from falling off during drilling.
  • Visible and Portable - The drill guide is made of transparent acrylic with excellent visibility that you are easy to position accurately on the decking wood post. It is portable and easy to carry. Recommend working with F clamp or C clamp for steadier and safer drilling. Note: Clamps are not included, please search F or C clamp and choose a size larger than 8 inches.
  • Pre-Designed System - To help you construct a cable railing system, we pre-designed a cable railing system named WoodBudget especially with 1/8" swage lag....
Check Stock

Muzata 60Pack Cable Railing Kit Hand Swage Threaded Stud Tensioner for 1/8" Cable for 2x2 Metal Post Deck Stair Cable Railing Hardware Terminal T316 Stainless Steel Marine Grade CR23, CA6

  • ... If you use the hand swage fitting on the post size less than 2", you can cut off the extra threads with a power cutting tool. If you use it on a wood post, you need to drill a hole with a 1/4"drill bit. Package includes: 60packs tensioner, 1pc 1/4"drill bit, 1pc bent wrench.
  • Level and Angle Installation -This cable railing kit is suitable for both level and angled sections. 30 degree angled beveled washer Muzata CR25 is needed for stairs installation. You can search MUZATA CB15 to find individual end cap nuts to cover this hand swage tensioner to make your cable railing project more unique.
  • Marine Grade- This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
  • Pre-Designed System- We pre-designed a cable railing system to help you construct a cable railing system that includes everything you need: cable railing post PS01 PS02 PS32, handrail HT10, cable railing tensioner CR23, 30° angle washer CR25, fixed end CR07, adhesive sleeves CR66, protector sleeves CR72, hydraulic crimper and cutter CK12, wire rope WR01, handrail connector HA01, HA02, HA23, HA24. Please note that package only contains contents in bullet point 1. Othe....
Check Stock

Steel DN Mate 60 Pack T316 Stainless Steel Left&Right Handed Thread Swage Lag Screws for Wood Post of 1/8' Deck Railing Kit, Cable Railing/Stair Deck Railing, DIY Hardware Kit, Wrench Included DM60

  • New deck railing design, clean and elegant. This cable railing kit includes 30 pcs left, 30pcs right hand thread lag screws, 1 patent design wrench, and 2 drill bits. Stainless Steel T316 material, anti-rust ,water and corrosion, marine Grade, good for indoor or outdoor usage. With our new made wrench, installation becomes much easier..
  • This deck railing hardware fit 1/8″ OD cable of railing system. The thread screws are designed for timber/wood post. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. Products without Left & right will bring you hassle and might damage the cable..
  • Length of cable should be 1-1/2″ shorter than wood surface distance（as shown in pic.4).
  • if you want to DIY a high quality cable railing system, standard 1/8″ (OD) cable which was made of T316-stainless steel is recommended. Please search on amazon” B0B71J2DXD” if you need black lag screws..
  • By the design of Right&left handed thread, of course it can be used to adjust the tension of attached cable, so the turnbuckles are not needed in the railing system. And this cable railing won’t be easily unfixed or destroyeded..
  • The lag screws could be drilled into wood to adjust the tightness without extra turnbuckle ....
Check Stock

Balcony Table Hanging Deck Railing Table Outdoor Balcony Bar Table for Railings Aluminium Folding Adjustable for Patio Deck Garden Baluster Windows 23.6\ x 15.7\

  • 003cul003e 003cli003e【Rust-Proof Poly Lumber Table Top】Small balcony hanging railing table is designed with 12mm thickness poly lumber table top. Poly lumber is the high density polyethylene, UV resistant and color protracted, it has the look of painted wood but without the upkeep real wood requires, no need painting or staining, durable and all-weather, LOW maintance not prone to crack, chip, peel, or rot, constructed with aluminium frame makes it more stronger, more durable003c/li003e 003c/ul003e.
  • 003cul003e 003cli003e003cb003e【4 Level Adjustable Height】003c/b003eFolding balcony table has 4 level height-adjustable position which allows you to customize the suitable height 21.6/22.8/24/25.2 inches according to your needs. Fix the screw in the hole of the required height, which is easy to operate 003c/li003e 003c/ul003e.
  • 003cul003e 003cli003e003cb003e【3 Level adjustable desktop height with 2 safety lock】003c/b003eOutdoor balcony folding railing table has another 3 level adjustable desktop height position to make stable and horizontal of the table desktop, more fittable with all railing wall in various size, under the tabletop is extra 2 safety lock to keep the table secure and stable in horizontal, easy storage and carry, suitable for....
Check Stock

VOTOER Swageless Wall Toggle Turnbuckle Tensioner Stainless Steel Marine Grade T316 for 1/8\ Cable Size (10 Packs)

  • The deck toggle turnbuckles are made from marine grade T316 stainless steel for maximum strength and durability..
  • The angle of the terminal can be adjusted up to 135 degrees with this toggle turnbuckle, which make them great for stair runs..
  • No special tools required, enables a quick and easy installation which saves time. You'll be enjoying cookouts with friends on your deck in no time..
  • These high quality stainless steel cable railing hardware is perfect for planning your own cable railing project, good for indoor or outdoor applications..
  • The 1/8" cable railing assemblies are a great-looking, easy to install cable railing system, eliminate all of the typical hassles of cable railing installation..
Check Stock

Muzata 4Pack Level drilled Cable Railing Post 36 x2 x2 Post Body 35 Fixed top Level Line Post Top Mount Brushed Stainless Steel Wood Concrete Level Deck PS02 LH4S

  • Key feature - This square cable railing post (brushed finish) is designed for 36" residential cable railing projects. It is pre-drilled with 10 pairs of level holes to work on horizontal sections and save your labor. It can act as both structural end post and middle post in level sections. Pls search Muzata DG01 to find matched cable railing gate.
  • Weather protection - This cable railing post is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence. However, plz note that T304 is not recommended for projects within 10 miles of the seaside or saltwater. Need posts applicable in humid conditions, please search Muzata PD01 PD02 PW01 to find the aluminum cable railing posts.
  • Code Compliance - This structural square post is designed with 3" cable spacing. Generally, the span between two structural posts should not exceed 4 feet to pass the 4" sphere test. But it could be increased to 7 feet if you add a stabilizer post between them. Please search Muzata PS32 or PS12 to find slice or rectangular stabilizer posts to get a broader view. It is important to consult local building offices about the rules since there might be....
Check Stock

Muzata 30 45 90 Degree Multi-Angle Drill Guide with Drill Bits Cable Railing Kit Stair Visible Drilling Template Drill Jig 4 Sizes for Straight Angle Corner Hole Lag Screw for Wood Post CT21, CT1 PG1

  • Multi-Angle and Accurate – This cable railing drilling guide jig dowel allows you to drill 90 degree horizontal vertical straight holes, 30 and 45 degree angle holes for the wood post. You can add a whole new level of accuracy with this drill guide jig when drilling railing post holes with it. Package includes: 1pc drill guide, 1pc allen wrench, 3pcs set screws, 1pc blowing dust ball, 4 sizes of drill bits：3/16”,9/32”, 5/16”,13/32”.
  • Various hole sizes and Portable- This cable railing drill template guide jig offers 4 different size guide track holes (fit 3/16”, 9/32”, 5/16”, 13/32” drill bit), which are compatible with most cable railing kits hardware. The hole drilled by 5/16’’ drill fit most 1/8″ cable railings lag screws. This drill guide for cable railing is light and small pocket carrying, compact, and easy to carry.
  • Visible and Easy Operate – The handrail drill guide is made of transparent acrylic with excellent visibility that you are easy to lock your selected position on the decking wood post. The fixing metal sleeve of the desired size can be replaced by adjusting the set screw. Use with the attached F clamp and 4 Sizes of drill bits to ensure steady drilling and precise angles.
  • Pre-Designed System – We pre-design....
Check Stock

Neitra 30 45 90 Angled Drill Guide Jig for Cable Railing Lag Screw Kit Wood Post, Drilling Degree Angle and Straight Holes, Durable All Metal Drill Jig for Railing Deck Stair Handrail

  • ACCURATE THREE ANGLES: The Neitra cable railing drill guide jig dowel allows you to drill 30°, 45°, and 90° angle holes for wooden stair railings and deck posts. The angles are fixed with no deviations, and you can quickly drill accurate 30°/45°/90° angle holes with an impact drill in the posts and railings, saving you time and effort and getting the work done quickly..
  • FOUR SIZES GUIDE HOLES: With four sizes of drilling guide holes for each angle, 3/8″(9.52mm), 5/16″(7.93mm), 1/4″(6.35) mm), 3/16″(4.76mm), each compatible with most cable railing cable protector sleeves and lag screws. An efficient and compact angled drill guide that is easy to carry..
  • ALL HARD METAL MATERIAL: The drill jig for angled holes is set with ultra-hard chrome-plated steel sleeves, which is wear-resistant, sturdy, and durable, no need to worry about being worn when drilling, and the drilling accuracy is error-free as always. The main body of the railing drill guide is made of high quality industrial grade aluminum alloy, hard and durable, with CNC anodized surface, wear-resistant and corrosion-resistant, clear markings..
  • EASY OPERATION: This drill guide for angle drilling can be used with locking C clamps and F clamps to prevent the drill jig from wobbling while ....
Check Stock