Categories

Best Marine Ball Valves

Mini Ball Valve 1inch NPT Female Male Thread 316 Stainless Steel Air Liquid Steam Shut-Off Valve

  • MATERIAL: this ball valve is made of 316 stainless stell material for higher corrosion resistance.
  • TWO DIRECTIONS: Inline valve for connecting two pipes going in the same direction.
  • Double-seal system allows flow to go in either direction.
  • WIDE APPLICATION: our steel Ball valves can be widely used in various air, liquid, and steam applications.
  • EASY TO OPERATE: Ball valves is designed with On/ Off switch and quarter-turn easy operation for manual control.
  • CONNECTION: 1 inch standard connections, which makes mini ball valve suitable for most pipes.
Check Stock

LUCKYLAKER Strong Suction Phone Mount Base Universal Marine Electronic Mount Ball Kayak Fish Finder Holder Car Fishing for Truck Boat Canoe

  • ◆Mainly for Fish Finders and Phones: This LUCKYLAKER phone mount ball can be widely used in car, kayaks and secure your gadget stays fixed regardless of road car/water conditions. It’s an essential tool if you are fishing since it puts your fish finder in a convenient spot to view screen. This is the marine mount ball that comes as a great rescue then fish finder or phone won’t drop down in vibrations on car.This mount is great when selecting the right mount for your car!.
  • ◆ Durable and Reliable Mount: The LUCKYLAKER phone mount ball can easily accommodate devices and would serve as the perfect mounting accessory, allowing you to take full advantage of what your phone and fish finder has to offer from which it will protect your gadgets from drops and rugged use. This phone mount ball for your fish finder or phone is available to secure and protect your accessories,and can be adjusted easily,saving your time from fighting to get it set up through mounting arm..
  • ◆ Sturdy and Functional Design: The phone mount ball is a sturdy and reliable mount holds your gadget tightly and securely on car. It’s strong enough to handle the weight of phones or mar....
Check Stock

Whale BP3708 Gusher 10 Mk3 Manual Bilge Pump, On-Deck/Bulkhead, up to 17 GPM Flow Rate, 1 ½-Inch Hose Connections, for Boats Over 40 Feet

  • Proven and popular pump has robust design to stand up to the most demanding marine environments and conditions.
  • Designed for bilge or holding tank pump-out.
  • Offers great versatility regarding where and in what position it is mounted, including on-deck or on-bulkhead.
  • High-flow non-choke valves for consistently sure pumping, and there's no filter to block flow or to require cleaning.
  • Intended for use on a boat 40 feet long or longer.Features rugged, durable LM6 diecast alloy construction, a sturdy metal pump lever, and an easy to grip ball handle.
Check Stock

6 Pieces Air Conditioning Refrigerant Angled Compact Ball Valve 1/4 Inch for R410A R134A R12 R22 AC HVAC and R12 R22 to R134A Adapters 6015 R134A Refrigerant Tank Adapter 6014 Vacuum Pump Adapter

  • Package includes: you will receive 3 pieces R12 R22 to R134A vacuum pump adapters refrigerant tank adapters, and 3 pieces air conditioning refrigerant angled compact ball valves, easy to match and convenient for your replacement.
  • Angled ball valves: in the package are 45 degree angle manual shut-off valves with 1/4 inch SAE male and female fitting.
  • For quick finger-tightening, the couplers nuts are deeply knurled designed for fast operation, the burst pressure ranges from the maximum 800 psi (55 bar) to the minimum 4000 psi (276 bar).
  • Vacuum pump adapters: these adapters are necessary for vacuum pumps, can adapt R12, R22 systems and R134a systems, are nice adapters for charging and service tools.
  • Easy to install: you can just tighten the adapter and get a good seal easily with hand, the adapters feature quick and easy connection and disconnection with high flow.
  • The ball valve can applied to hoses for charging and recovery, suitable for refrigerants R134a, R410A, R22 and R12 charging hoses or manifold, useful tools for HVAC, AC, car air condition maintenance.
  • Confident to use: made of copper, all angled ball valves and adapters in the package are durable for long-term service, provide simple and easy operation and installation, strong sealing for du....
Check Stock

PVC True Union Check Valve 1’’ Slip Swing Full Port Utility Check Valve Sch80 Socket Pool Ball Check Valve for Backflow Prevention

  • 【PVC Ball Check Valve】Schedule 80 PVC ball check valves have a spherical ball inside the valve body which works as a check to allow flow in one direction and close off to prevent back-flow..
  • 【INSTALLATION TIP】PVC union check valves are designed for VERTICAL installations, MUST be used in an upflow position to work properly. Check valves MUST be installed with the valve's flow arrow pointing in the direction of the flow. Do not install valve upside down.（NOTE: NO SPRING).
  • 【PVC Union Check Valve】True union check valve, can be taken apart for cleaning, allows for easy removal without breaking down the piping connection..
  • 【Material】1'' Slip check valve made of PVC material, O-ring with EPDM material, low-temperature-resistant, impact-resistance, ultraviolet-resistance, rust-resistance. Fits for Schedule 80 1 Inch Pipe..
  • 【Application】PVC Swing Check Valve 1’’(DN25) - Non-return or "one way" valve is ideal for flow control, such as commercial plumbing, aquariums, irrigation, swimming pools, water parks and OEM applications..
Check Stock

ROYHOO 4PCS 1/2 Inch Float Ball Valve Plastic Water Float Valve Mini Plastic Float Valve with Adjustable Arm for Automatic Water Level Control of Water Tank

  • Easy to use: you can have a automatic water level control by adjusting the angle which is formed by the float and the valve body, if the surface of water contacts the float, the water inlet switch will be automatically closed..
  • Quantity and measurement: we provide you with a total of 4 pieces 1/ 2 inch float ball valves, the valve total length is approx. 7.87 inch and a float length is about 3.74 inch, you can install different numbers of the water valves according to the size of the tank or pool..
  • Suitable condition: the float ball valve can be adapted to water temperature which ranges from 0 to 70 degrees Celsius, 0.01-0.8MPA water pressure is applicable, featuring with good control of the water inlet, will give a nice using experience to you..
  • Multifunction: our plastic water filter float ball valves are suitable for a variety of occasions, such as small swimming pools and storage tanks at home, more numbers of water valves should be available for you to install if water inlet is large, effectively solve the problem of taking water in a short time..
Check Stock

Wilkins 115-975XL2 1.5-Inch Lead Free Reduced Pressure Backflow Preventer

  • Reduced pressure principle backflow preventer consisting of a pressure differential relief valve located between twoindependently operated spring-loaded center guided check valves, “Y” pattern body.
  • Complete with two full port resilient seated ball valves for shut-off and four resilient seated ball valve test cocks.
  • Pre-plumbed backflow station. Assembly can be of the reduced pressure principle or of the double check type.
Check Stock

5.0L GM Vortec Marine Engine Cylinder Head. Replaces Mercruiser & Volvo Penta applications years 1997-newer. Replaces Mercruiser 938-8M0087884

  • New aftermarket complete cylinder head with valves and springs..
  • Replaces Mercruiser Volvo Penta, OMC, Marine Power, GM Marine 5.0L years 1997-newer..
  • Replaces Mercruiser part numbers 938-8M0087884, 802556.
  • Replaces Volvo Penta part number 3857663.
Check Stock

3.0L GM High Output Marine Engine Cylinder Head. Replaces Mercruiser & Volvo Penta applications years 1991-newer. Replaces Mercruiser 938-8M0115135

  • New aftermarket complete cylinder head with valves and springs..
  • Replaces Mercruiser Volvo Penta, OMC, Marine Power, GM Marine 3.0L years 1991-newer.
  • Replaces Mercruiser part numbers 938-8M0115135, 809891, 810849.
  • Replaces Volvo Penta part number 3854012.
Check Stock

Invincible Marine Fuel Line Connector, Mercury Female, 3-Piece, Multi, One Size (BR53210)

  • Made using the highest quality components.
  • The most trusted name in marine accessories and equipment.
  • This connector fits 5/16-inch or 3/8-inch fuel lines, includes spring loaded double check valves and has stainless steel hose clamps.
  • BR53210 Mercury Fitting 3-piece Female Tank Cast Aluminum, ¼-inch NPT.
  • This fuel connector has been tested in extreme climates and is alcohol resistant.
Check Stock

GIYO Mini Bike Pump, Portable Compact Bicycle Pump with Pressure Gauge, Tire Repair Kit, Perfect for Presta & Schrader Frame Mount for Road, Mountain & BMX Cycling, Ball Pump with Needle 120 PSI

  • [Clever Valve System]: The handhold bicycle pump combines with automatically compatible valve fit for Scharder and Presta valves. No changing valves needed, tight with Scharder and Presta valves without air leak..
  • [Carry-easily]: Lightweight and Durable handy cycling pump is equipped with mounting bracket which can attach tire pump to your bike frame, using hook and loop strap and fixing screws securely hold the pump in place..
  • [High Pressure PSI]: The maximum volume of the hand-operate bicycle pump is 120PSI, which can be used to inflate the bicycle tires and maintain the tire pressure. PSI value can be checked by pressure gauge during the inflation process..
  • [Multiple Functions]: This air inflation pump is suitable for Mountain , Road , BMX , MTB bike , Stroller , Electric bicycle , Kids bike. Comes with ball needle inflate that also fit for Football , Basketball , Volleyball , Soccer ball and other balls..
  • [Repair kits]: Tire repair tools included with 1 piece mini bike pump, grinding tablet, ball inflate needle, velcro strap, mounting bracket, 2 pieces of fixing screws and mini pry bars, 6 pieces of tire patches..
Check Stock

Eastman 60245 Crimp PEX Dual Washing Machine Outlet Box 1/2" Connection White

  • CONNECTION: 1/2-inch Crimp PEX (F10807) inlet connection and 3/4-inch Male Hose Thread (MHT) outlet.
  • BUILD: Sturdy construction made of heavy-duty plastic with 1/4- turn ball valves installed.
  • DESIGN: It has a right or left side drain connection. It can also be installed inverted for top-mount valves.
  • CONTENTS: Includes installed hot and cold water valves, support bracket, faceplate Snap-on frame accommodates up to 1″ drywall.
  • EASY INSTALLATION: This outlet box is designed for recessed residential applications.
Check Stock

iBOLT 25mm / 1 inch Ball Composite Universal Marine Electronic Fish Finder Mounting Plate for Industry Standard Dual Ball Socket mounting arms

  • This iBOLT 25mm / 1-inch / B size Universal Marine Electronic Fish Finder Mounting Plate is made out of sturdy composite material with a rubber coated ball joint and is compatible with all industry standard 1 inch / 25 mm mounting arms. Ball joints are coated in a rubber material..
  • COMPATIBILITY: Commonly used with IBBZ-33921 or IBBZ-33791 and other industry standard 25mm / 1 inch dual ball mounts / arms. Use with Bizmount series mounts or any other 1-inch / 25mm / B size industry standard compatible mount..
  • FEATURES: a 30x38 mm industry standard 4 hole pattern (=AMPS) that will work with all industry standard AMPS adapter plates and hole patterns that are compatible with GARMIN GPSmap 7x12, 7x10, 12x2, 7x08, 9x2, STRIKER 9, Echo Map Plus 6”-7”, 9” and LOWRANCE HDS 9, 12 fish finder/ marine electronic equipment..
  • INCLUDES: 25mm / 1-inch Composite Universal Marine Electronic Fish Finder Mounting Plate.
  • COMPATIBLE DEVICES: GARMIN GPSmap 7x12, 7x10, 12x2, 7x08, 9x2, STRIKER 9, Echo Map Plus 6”-7”, 9” and LOWRANCE HDS 9, 12 fish finder/ marine electronic equipment..
Check Stock