Best Marine Diesel Engines - TopShopReview.com

REVIVE Revive Turbo Cleaner Kit - Diesel [1449-9000]

Designed for all gasoline engines and diesel engines without glow plugs.
Fits injector bracket on most diesel trucks and heavy equipment.
Produce quick, smooth starting of gasoline and diesel engines under extreme cold conditions down to -65 deg F.
Saves battery and ignition during cold weather.
Contains upper cylinder lubricant and corrosion inhibitors.

Faster starts, even in temperatures as low as -65°F.
Formula contains upper cylinder lubricant as well as corrosion inhibitors.
For gasoline and diesel engines - Including: cars, trucks, motorcycles, tractors, buses, marine engines, lawnmowers, snowmobiles, snow blowers, construction equipment, etc..
Will not harm catalytic convertors or oxygen sensors.

Designed for all gasoline engines and diesel engines without glow plugs.
Fits injector bracket on most diesel trucks and heavy equipment.
Produce quick, smooth starting of gasoline and diesel engines under extreme cold conditions down to -65 deg F.
Saves battery and ignition during cold weather.
Contains upper cylinder lubricant and corrosion inhibitors.

Cleans dirty injectors and prevents injector sticking in all engines, including High Pressure Common Rail systems.
engines run smoother with less power lag and faster cold starts and boosts power.
reduces need for downshifting during high-load conditions.
Contains Slick diesel lubricator for maximum fuel lubrication.
protects pumps and injectors from accelerated wear.
Effective in all diesel fuels, including ultra low sulfur diesel, biodiesel and biodiesel blends.
will not harm diesel exhaust in engines 2007 and newer.

Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications.
Heating Fluid: Engine Coolant, Water, other No pump needed (thermosiphon principle).
Engine Displacement: 350 – 500 CID (5.7–8.2 L).
Volts: 120v - kW: 1.5 - AMPS: 12.5 - 60Hz.
Temperature Range: ON: 80°F (27°C) – OFF 100°F (38°C).

Works with all brands of synthetic and petroleum-based oils. Including full synthetic, semi- synthetic, conventional, and mineral. Gas or Diesel engines..
Recommended to be used in all automobile, truck, lawn, marine, agriculture and heavy-duty equipment..
Increases horsepower, lowers operating temperatures and reduces engine noise and vibration in all engines..
USAGE: Use 2 ounces per quart of oil in crankcases, 3 ounces for heavy duty and towing applications. Transmissions (Automatic or Manual) Use 1 ounce per quart of transmission fluid. Differentials use 1 ounce per quart of differential fluid. Power steering systems use 1 ounce per quart of fluid. Hydraulic fluid 1 ounce per 2.5 gallons of hydraulic fluid. Motorcycles 1 ounce per quart of fluid max. Lasts multiple fluid changes but maybe used more frequently for best results..

Package Includes a Fuel Line Assembly 3/8 Inch Hose 6 Feet Long, a Premium Primer Bulb, 2 Yamaha/Mercury Female Quick Connectors and 2 Stainless Steel Hose Clamps.
Compatible with All Yamaha/Mercury Engines and Fuel Tank Models (Mercury Before 1998). Meets USCG type B1-15 SAE J1527 and ABYC Accepted Standards. Reinforce Hose Approved by Environmental Protection Agency EPA and CARB regulations.
Multi-layer Low-permeation Primer Bulb 3/8 Inch Hose that provides reliable and efficient priming to help start your boat engine.
Primarily used for fuel feed. Compatible with gasoline up to 85% ethanol-blended fuels, diesel, and all bio-diesel blends.
Engineered and designed with marine-grade material. This Fuel line is weather and UV Resistant. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.

Cleans dirty injectors and prevents injector sticking in all engines, including High Pressure Common Rail systems.
engines run smoother with less power lag and faster cold starts and boosts power.
reduces need for downshifting during high-load conditions.
Contains Slick diesel lubricator for maximum fuel lubrication.
protects pumps and injectors from accelerated wear.
Effective in all diesel fuels, including ultra low sulfur diesel, biodiesel and biodiesel blends.
will not harm diesel exhaust in engines 2007 and newer.
Special Shipping Information: This item cannot be returned and has additional shipping restrictions.

Mobil 1 Turbo Diesel Truck Is Designed For Modern Diesel Truck Engines, Delivering Long Drain Capability, Exceptional Performance, And Potential Fuel Economy Benefits.
Meets Or Exceeds The Demanding Specifications Of Major Truck Manufacturers - One Engine Oil Can Be Used For Mixed Fleet Operations.
Recommended For Use In All Super High-Performance Diesel Applications, Including Low Emission Engines.
Helps Engines Last Longer By Reducing Low-Temperature Sludge Buildup And High-Temperature Deposits.

Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications.
Heating Fluid: Engine Coolant, Water, other No pump needed (thermosiphon principle).
Engine Displacement: 350 – 500 CID (5.7–8.2 L).
Volts: 120v - kW: 1.5 - AMPS: 12.5 - 60Hz.
Temperature Range: ON: 80°F (27°C) – OFF 100°F (38°C).

Fits the following Brands Models: Yanmar L100AE-DE, L100AE-SE, L100EE.
Fit Brand: Kipor And Chinese, All 10 HP 186 Chinese Diesel Engines..
All Chinese open frame diesel generators engines that produce between 5000 to 7000 watts..
Fits 5000 to 7000 watts Blue Max, Rural King, Black Diamond, Champion, X-Power, Genmax, Pro-Series, ETQ, All Power, Sigma Power Products, NorthStar open frame and silent generators..
For Yanmar Diesel Engines And Generator..

Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications.
Heating Fluid: Engine Coolant, Water, other Fluid Capacity: 0.11 gal (0.42 L).
Volts: 120v - Watts: 1500 - AMPS: 12.5 - 60Hz.
Temperature Range: ON: 120°F (49°C) – OFF 140°F (60°C).