Categories

Best Marine Engine Oil Line

LTI Universal 10ft Nylon Stainless Steel Braided 5/8\ AN10 PTFE E85 Fuel Line Hose Injection (BLACK, 10AN)

  • ...urbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications..
  • Application: fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes. Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Pressure Rating: Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi..
  • This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
  • 10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..
  • We Provided 12 months warranty from the date of purchased. Free return within 30 days NO QUESTION ASK..
Check Stock

New All Balls Fuel Pump Module 47-1029 Compatible With/Replacement For Can-Am Outlander DPS 450 EFI, Outlander DPS 570 EFI 2016-2020, Outlander L 450 EFI 2015-2016, Outlander L 500 EFI 2015

  • ➰APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications..
  • ➰WORKING ENVIRONMENT-Maximum Working Pressure=725 psi(5 mpa). Bursting Pressure=2175psi(15 mpa). Working Temperature Range=-40℉ to 392℉(-40℃ to 200℃)..
  • ➰SIZE- length=20 feet. Inner diameter=0.51 inches (12.95 mm). Outer diameter=0.63 inches (16 mm)..
  • ➰MATERIAL- Inner layer: PTFE (Teflon) rubber.
  • middle layer: 304 stainless steel wire mesh sleeve.
  • outer layer: braided nylon. PTFE fuel lines are more resistant to high temperature and pressure..
  • ➰NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended..
Check Stock

Mercruiser Engine Oil Change and Sterndrive Gear Lube Maintenance Kit

  • Fits all Mercruiser sterndrive GM engines (except 4.3L V6 without remote oil filter).
  • Includes Water Separating Fuel Filter 35-802893T & Oil Filter 35-866340K01.
  • Includes 2-4-C Marine Grease 92-802859A1.
  • Includes SAE 25W-40 Marine Engine Oil 92-8M0078628 and 92-8M0078627.
  • Includes 3 Quarts High Performance Gear Lube 92-858064K01 with Washers and Gear Lube Fill Pump.
Check Stock

Shipmate 4-Stroke Marine Engine Oil SAE 10W-30 Quart #1026-4027

  • SHIPMATE 4-Stroke Marine Engine Oil SAE 10W-30 is a high performance, Synthetic Blend, motor oil specifically formulated for use in 4-Stroke Outboard engines, with or without catalyst converters..
  • Works with Cheverolet (GM), Evinrude, Ford, Honda, Mercury, Suzuki, Volvo-Penta, Yamaha.
Check Stock

Quicksilver 866340Q03 Oil Filter - MerCruiser Stern Drive and Inboard Engines

  • Superior M-Pleated cleansing filter media removes oil contaminants that could damage your engine.
  • Produced to meet Mercury Marine original equipment manufacturer specifications to best protect your MerCruiser engine.
  • Features an anti-drain back valve to ensure start up lubrication and eliminate dry starts.
  • 50% thicker metal shell than conventional filters with a durable, corrosion resistant finish.
  • For MerCruiser High Performance stern drive or Inboard engines made by General Motors and Mercury Marine.
Check Stock

Wayside Pond

  • ENAMEL MARINE PAINT: Get a long-lasting, elegant cruiser blue finish on your boat, bridge, or other marine structure with Duralux Marine Enamel..
  • LONG-LASTING FINISH: This marine structure and boat paint stands up to salt water, oil, gasoline, repeated washings and the discoloration effects of harbor gasses for a long-lasting finish..
  • FOR A VARIETY OF MARINE APPLICATIONS: This single-component topside enamel adheres to primed steel, metal, wood, aluminum and fiberglass – making it ideal for commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures..
  • EASY TO USE: Apply 2 thin coats of Duralux Marine Paint on a prepared surface with a brush, roller, or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight. Packaged in a 1-quart container..
  • FOR ON-SHORE AND OFF-SHORE APPLICATIONS, Duralux Marine Coatings offers a complete line of high-performance enamels, spar varnish and other coatings in a variety of colors.
Check Stock

8MILELAKE 9L Vacuum Hand Operated Engine Oil Changer Fluid Extractor Evacuator Pump Tank

  • Suction Probes: Ø4, Ø6, Ø8, Ø10,and 1pc of Ø4 brass probe) probe length 1M.
  • Use to evacuate automotive fluids:engine and gear oil, transmission fluid, brake fluid, coolant.
  • This oil changer pump is ideal for other liquids such as water and soluble oil,for Use With Most Vehicles and Machines.
  • 9 ltr Capacity device constructed from composite materials and suitable for the extraction of all types of engine, transmission and lubricating oils from cars, motorcycles, marine engines, stationary engines and industrial machinery..
Check Stock

Derale 13950 Atomic-Cool Remote Cooler , Black

  • Universal:universal oil cooler,you may need to do some custom modifications and require other hardware to meet your needs.Please measure before purchase to make sure there is enough space for installation..
  • Installation location:choose a place with good and cold air through the oil cooler kit for installation.Instruction included..
  • Function:keep oil temperature low, help to improve the lubricating effect of engine oil, prevent parts damage ,or even seizure of the engine.Usable to cool down engine oil,transmission, and rear-differentials.Besides,this stacked-plate oil cooler design smaller and lightweight suitable for narrow space..
  • Size:10AN 30Row oil cooler,oil capacity:0.74L.Test pressure: 116psi,burst pressure:232psi.Material:aluminium alloy..
  • Package Include:1pc 30row engine oil cooler.2pcs 10an female to 8an male fittings,2pcs 10an female to 6an male fittings.Can be used to connect 8AN / 6AN braided fuel line hose ends..
Check Stock

Deft Defthane Interior Exterior Clear Polyurethane Satin Spray, 11.5-Ounce Aerosol

  • Excellent for interior and exterior wood surfaces including floors, doors, furniture cabinets and marine applications above the water line.
  • A high-solids oil-based polyurethane formulated for hard use areas.
  • This high solids oil based polyurethane formulated for hard use areas.
Check Stock

Pennzoil 36677 Pennzoil Multi-Use Pump

  • Multipurpose Transfer Pump: Universal gas siphon pump is designed for garage, home, auto, and marine use.
  • The transfer pump fits standard gallon containers and features a single pump.
  • Universal Fluid Pump: Works for all automotive fluids, water and as an inflation pump for tires, balls, pool toys and more.
  • The small size is perfect to keep in the trunk or in the garage.
  • Universal Fluid Pumps: Easy to use gas or air siphon pumps transfer fluid between containers or from container to engine, cooling system and more uses.
  • Ideal for vehicles, boats, motorcycles, RVs and any other vehicle with an engine.
  • Natural Gas and Oil: Base oil made from natural gas is 99.5% free of impurities typically found in crude oil.
  • Check out our full synthetic motor oils, power steering fluids, conventional motor oil blends, air and oil filters and more.
  • Pennzoil: The number one name in motor oil, we offer a range of products to protect and optimize vehicles and high performance racing car engines.
  • Find the right product for your car, truck, boat, automatic and manual transmission vehicles.
Check Stock

Maxima 259128 Marine Pro 2-Stroke TC-W3 Premix/Injector Oil - 1 Gallon

  • Maxima Marine Pro is a petroleum based 2-cycle oil specifically formulated for watercraft and outboard motor service.
  • Marine Pro is an outstanding lubricant with enhanced rust and corrosion protection, anti-scuff/anti-wear protection and special additives to prevent....
  • Ash less additive system exceeds NMMA TC-W3 specs and API TC standards and keeps vital engine parts clean while preventing piston and cylinder....
  • Blends easily as a premix or for use in oil injection systems.
  • Environmentally safe and provides excellent rust and corrosion protection.
Check Stock

Thunder Parts Original HOTSTART TPS101GT10-000 Engine Coolant preheater | 1000 watts 120V 8.4A | 1 Year Warranty!

  • Pre-Heat: Diesel and Gas engines Used in: Marine Heating Systems, Railroad operations, Heavy equipment, Trucks and Bus, Emergency generators, Oil and Gas and Industrial applications..
  • Heating Fluid: Engine Coolant, Water, other - No pump needed (thermosiphon principle).
  • Engine Displacement: 350 CID (5.7 Liter) 120 V - 1000 Watts - AMPS: 8.4 - 60Hz | Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C).
  • Keep your engine running smooth this winter with reliable engine heaters. Reduce engine stress and smoke during cold start ups. HOTSTART keeps your engine heated and ready to deliver full-power without idling or delays. Quick Start every time!.
Check Stock

Acouto Bilge Air Blower 12V 4inch 270CFM in‑Line Marine Bilge Air Blower 4\ DC Electric Fan Boat Accessory 12VDC White

  • 12V Bilge Air Blower---- This bilge air blower 12v is suitable for 4in diameter hose and provides ventilation for engine compartments, galleys, bilges and heads. 100% brand new, please be assured of your purchase.
  • High Efficiency---- Six‑blade fan maximizes airflow and efficiency, more reliable and practical. Very low current draw, high volume air flow, and long service life. Flow: 270 CFM.
  • Stable Performance---- Sealed motor shaft for moisture protection, to have better performance. Corrosion proof design and water resistant motor casing for use in the marine environment.
  • High Quality ABS---- 4" Marine Bilge Air Blower has white ABS plastic construction, wear-resistant and reliable in use. The manufacture of the 4" in-line marine bilge air blower meets the strict quality requirements.
  • Easy to Install---- The 4" in-line marine bilge air blower has built-in mounting feet for vertical or horizontal installation. Ideal and direct replacement for old or damaged bilge air blower, dependable to use.
Check Stock