Categories

Best Marine Engine Oil Pressure System Kit

JoyFans Oil Pressure Tester Tool, 0-140PSI Oil Pressure Gauge Kit for Fuel System Mechanical Sensor Engine Cylinder Compression Test with Hose Adapters for Cars ATVs Trucks Use Red Case

  • Fuel Injector Pump Pressure Check: Engine oil pressure test tool kit is designed to test oil pump pressure and check operation of fuel system components. Compare the measured pressure value to the standard reference range from manufacturer, we can take quick and accurate diagnosis and feasible solution on the oil pipeline leakage and engine wear, so as to confirm if the oil pressure gauge has been damaged. No more reliance on the dashboard light..
  • Oil Pressure Tester: The petrol engine cylinder tester kit has a shockproof rubber casing and a large clear dial with readings from 0~140 psi and 0~10 bar for easy and accurate work on both American and metric systems. Keeping the gauge safe from bumps and drops. Built-in hose assembly also comes with a side pressure relief button for instant pressure reset and no repeated hose disconnect, and 4 ft long flexible hose with convenient quick coupler for simple adapter installation and removal..
  • Durable Construction: 11-piece metal adapters are all made with heavy-duty forged steel and brass hardened for maximum strength and longevity.
  • designed to withstand extreme pressure in any situation for professional use. Each thread adapter marked with number, features black oxide finish to resist rust and corrosion.
Check Stock

KIMISS Towing Hitch Engine Oil Coolers & Kits, Motorcycle Engine Oil Cooler Oil Cooling Radiator Kit for Honda CB CG 100CC-250CC(85ML-Silver)

  • 【Required accessories】Whether you're using a top-down corner engraving or pulling down a tow, your high speed requires a reliable and efficient cooling system..
  • 【Minimal pressure loss】With minimal pressure loss, the kit uses a large oil drain cooler mounted in the front grille for optimum airflow and cooling..
  • 【Funtion】Cooling the engine temperature keeps the engine within normal operating temperature range, reducing engine load and extending its life..
  • 【Two choices】Invisible black and stylish silver cooler options include pre-assembled stainless steel cords and special mounting brackets for a painless, clean installation..
  • 【Fitment】Motorcycle Oil Cooler System Kit, Fit for Honda GY6 100CC-150CC Engine. Transmission Cooler Mounting Kit Oil Cooler Lines.
Check Stock

Quicksilver 10W-30 Oil Change Kit for 4-Stroke Yamaha F75 Through F115 outboards

  • Everything you need for an oil change on all Yamaha F75 through F115 outboards in one box.
  • Kit includes (4) 1L bottles of Quicksilver 10W-30 4-Stroke Marine Engine Oil, Quicksilver premium oil filter, drain plug seal and funnel.
  • Quicksilver 4-Stroke Marine Engine Oil is formulated with advanced corrosion inhibitors and provides outstanding lubricity to reduce wear, scuffing and scoring for improved long-term engine reliability.
  • Quicksilver oil is certified for use in all leading marine brands.
Check Stock

Fuel Injector Cleaner Tool Car Fuel System Cleaner Kit Portable Non-Dismantle Cleaning Tools Fuel Injector Tester 600ML 140PSI Injector Cleaning Machine(Without Liquid)

  • 【Multifunctional Fuel Injection Cleaner Tool】 This injector cleaner tool can clean the entire fuel system, including the throttle valve, fuel nozzle and combustion chamber. At the same time, it also has a high and low pressure cleaning function to help you better complete the fuel system cleaning job..
  • 【Disassembly-Free & Dual-System Fuel System Cleaner Kit】The fuel system cleaner kit is used to clean the fuel injector, intake system and three-way catalytic converter. It can clean the car without disassembly. And it has two electronic fuel injection systems. One engine has an oil return pipe, and the other engine does not have an oil return pipe (Quick-connect anti-corrosion, anti-friction joints and anti-friction pipes for all cleaning fluids.).
  • 【Adjustment of Throttle Mode of Fuel Injector Cleaning Kit】The connection method is the same, just adjust the air source pressure to 1-5PSI. How to identify the inlet and return hoses: ①Generally speaking, the larger the inlet pipe, the smaller the return pipe.
  • ②There is always a filter interface on the side of the inlet hose and a buffer interface on the return side.
  • ③There is an arrow on the hose Indicate the fuel flow direction..
  • 【Widely Applicable Engine Cleaning Tools】 This injector c....
Check Stock

Sinister Diesel Oil Filter & Coolant Filtration System For FORD POWERSTROKE 2003-2007 6.0L Diesel with All Hardware - No Drilling Or Part Removal Required - Easy Installation

  • PROLONG ENGINE & OIL LIFE: Using Sinister Diesel Oil Filter & Coolant Filtration System you can prolong the life expectancy of your oil and engine. As time passes, the oil starts losing its quality due to contaminants coupled with dirty coolant that causes significant damage to your engine. Our Coolant Filtration System for Oil Filter & Coolant Filtration System minimizes contaminants in oil and filter coolant to increase the lifespan of your engine..
  • FOR FORD POWERSTROKE 2003-2007: This Coolant Filtration System Kit and oil filter kit is made specifically for FORD POWERSTROKE models between 2003-2007 to provide a precise installation without having to remove any engine parts or drill any new holes.
  • PREMIUM GRADE CONSTRUCTION: To provide the finest oil filtration kit and coolant filtration kit we used the finest quality CNC machined billet 6061 aluminum to ensure long-term use to reliably bypass and filter small amounts of contaminants in the oil and coolant while to increase 6.0L Diesel engine lifespan..
  • EASY INSTALLATION: Sinister Diesel Water Coolant & Oil Filter Bypass System for FORD POWERSTROKE comes with everything you need right out the box so that you can install it easily. This Water coolant filtration kit includes 1) Amsoil 2 Micron Oil ....
Check Stock

YSTOOL Oil Pressure Tester Kit Professional Oil Pressure Gauge Tool for Engine Diagnostic Test with Hose Adapters and Carry Case for Cars ATVs Trucks Use 0-140psi

  • The engine oil pressure tester kit is used to diagnose and test the engine oil pressure value, to check whether it is normal. Prevent engine failure due to lack of oil. And with this best in class tools, you can get a definite pressure value well without relying on the dashboard light..
  • There are 10 types of thread adapters are suitable for most cars, motorcycles, boats and other vehicles with gasoline and small diesel engines. As long as the adapters can match with your engine and oil pressure does not exceed 140 PSI. The 10 adapters are marked with number, you can choose the right one very easy..
  • The pressure gauge uses metal gauge head with shockproof rubber cover, 3" big dial with clear dual scale range 0 to 140 PSI and 0 to 10 Bar. Compare to a large range, this oil pressure gauge is easy to read about 1-2 Bar with a short range. There are a straight quick coupler and a elbow one in the case, you can choose it according to the location of the engine oil pressure test port..
  • Steel adapters, brass quick couplers, are featured with high hardness, rustless, durable and good air sealing. The 4FT long hose is made of rubber nylon resin with MAX. working pressure 300 PSI. There are also a small bag of seal gaskets, which are used for replacing the ones on....
Check Stock

IPR Socket Tool Screen Kit - Compatible with Ford Powerstroke 6.0L Vehicles - F-250, F-350 Super Duty, Excursion, E-350 - Replaces 3C3Z9H529A, 904-415, 3C3Z-9H529-A, Injection Pressure Regulator

  • Replacement IPR Valve Seal Kit With Socket Tool - The injection pressure regulator valve regulates the oil bypass circuit of the high pressure oil pump. It is an electromagnetic valve that opens and closes to allow high pressure oil into the injectors. When the oil system gets contaminated by dirt or debris, the mesh filter of the IPR valve gets torned letting the debris get in and make the plunger mechanism inside to get stucked causing the vehicle to not build up pressure..
  • Compatible Replacement for Ford Vehicles - 2004 - 2005 E350 Club Wagon | 2004 - 2010 E350 Super Duty | 2004 - 2010 E450 Super Duty | 2003 - 2005 Excursion | 2003 - 2007 F250 Super Duty | 2003 - 2007 F350 Super Duty | 2003 - 2007 F450 Super Duty | 2003 - 2007 F550 Super Duty | 2003, 2004, 2005, 2006, 2007 F650 | 2003 - 2007 F750 |. The oil system usually gets contaminated when the oil cooler is serviced or replaced and has not been cleaned properly..
  • Replaces Part# 3C3Z9H529A, 904-415, 3C3Z-9H529-A, 904415 commonly found on popular models with the Diesel Powerstroke 6.0 engine including year models 04, 05, 06, 07, 08, 09, 10. If you are experiencing no or hard starting when the engine is hot or after stalling and usually starts when it is cold or your vehicle is idling erratically ....
Check Stock

Mercury OEM Oil Change & Filter Kit 40-50-60hp Four Stroke Outboard 8M0081916

  • Mercury 25W-40 Marine Engine Oil features high-tech, advanced anti-wear additives that provide up to 35% better camshaft wear protect.
  • Designed to maintain engine reliability and performance, tests have shown that Mercury 25W-40 Marine Engine Oil holds its viscosity ratings longer in....
  • Mercury Oil, combined with a Mercury Oil Filter will offer optimum marine engine protection..
  • NOTE: It is recommended that boat owners change their engine oil annually or as noted in their owners manual..
Check Stock

Oil Pressure Gauge Adapter, 1/8in NPT Female to M10x1.0 Male Reducer Oil Pressure Gauge Adapter Replacement Black

  • [ IMPORTANT ] VMS RACING Brand Design (NOT generic). Comes in VMS RACING Branded BOX. Brand New in Box / Never Used / Never Installed..
  • High Quality Silver Face 0-60 Psi Triple Chromed Oil Pressure Gauge with TWO Triple Chromed Plated Fittings and O-ring included to match the gauge and for a long-lasting finish. EVERYTHING IS TRIPLE CHROMED... EVEN ALL OF THE FITTINGS so you will NOT see any brass . Beautiful finish to compliment your most prized Harley. PERFECTLY DRESSED FOR ANY OCCASION. If you have other nice chrome pieces on your ride, this gauge will feel right at home and a must-have..
  • Measurements: Gauge face (w/ bezel) - 1.66" (42.25mm) Gauge Case - 1.62” (41mm) Gauge Depth ~ 1” (25mm) Fitment: Fits (70-84 Shovelhead) (84-99 Evolution) and (38-69 & 84-91 Big Twin Models) Engines ONLY. Fittings allow for a FLAT MOUNT (or) 45 Degree Mount depending on the application. Triple-chromed / Brass INTERNALS. 1/8 NPT main Male Fitting.
  • VMS RACING Oil Pressure Gauge Kit Provide you with a MORE ACCURATE OIL PRESSURE READING than Liquid Filled Oil Pressure Gauges. Liquid Filled Gauges tend to lose the liquid due to Engine Vibration. You eliminate that problem with this gauge. This Kit allows for accurately measuring Oil pressure in your Big Twin Engine. ....
Check Stock

OEMTOOLS 24441 Manual ATF Refill System, 8 Adapter Transmission Fluid Pump, Manual Fluid Transfer Pump Automotive, ATF Pump w/Shut-Off Valve

  • MANUAL TRANSMISSION FILL PUMP: The manual transmission fluid transfer pump allows the operator to fill or top off transmissions with up to 3 liters (3.1 quarts) of fluid between refills.
  • Multiple adapters to fit all of your transmission’s needs.
  • PRESSURIZED FILLER SYSTEM: Pressurized operation frees users from continual pumping.
  • Transmission flushing system works at a maximum pressure of 20 PSI.
  • The gauge registers a maximum pressure of 30 PSI.
  • Release excess pressure with the release valve.
  • FITS MANY VEHICLES: This transmission fluid pump automotive tool includes adapters for use with many Ford, BMW, Honda, Nissan, VW, Porsche, Mini Cooper, Audi, and Mercedes-Benz transmissions.
  • Included adapters cover the most common transmission systems.
  • CONVENIENT FEATURES: ATF transmission fluid filler comes with a belt attachment for storing each ATF flush adapter on the oil dispenser tank.
  • Transmission fluid flush kit hose features a swivel connector and a fluid dispensing shut-off valve.
  • MULTI-PURPOSE TRANSMISSION FILL KIT: This transmission pump can be used for pressurized fills like engine coolant, motor oil, brake or power steering fluid.
  • Transmission fluid pump transfer system is a money saver for the DIY mechanic’s tool kit.
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL INJECTION GAUGE: The car fuel pressure diagnostic test kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • 3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
  • PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Pleas....
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-140PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL PRESSURE GAUGE KIT: The car fuel pressure tester kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or direct-injection engine, due to the fuel gauge's low pressure range. Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • CONNECTIONS FOR TU-114 FUEL PRESSURE GAUGE TOOL KIT: The fuel pressure test gauge set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve on fuel pump, 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee help to splice in-line between the fuel pump and engine for most vehicles..
  • FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 3-1/2" large dial with 0-140psi/0-10bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16"L fuel drain hose help to re....
Check Stock

BETOOLL 13pcs Compression Tester with Spark Plug Tester - 300PSI Engine Cylinder Compression Gauge Automotive Tool

  • The engine compression tester kit is used to test the pressure of petrol engines to help determine cylinder problems, not applicable to crude oil engines..
  • Double spark plug testers could help diagnose engine outboard motor and fuel delivery system problems quickly and easily, and the spark plug works properly with the intermediate indicator light glowing..
  • Engine compression tester with release valve desgin could offer single-handed operation inflation and deflation..
  • The 13pcs compression tester kit comes with 10 different connect adapters, widely suitable for most types engine cylinder such as car, ship, truck, lawn mower, ATV, boat and so on..
  • Triple range cylinder compression gauge reads 0-300 psi , 0-20 bar and 0-21 kg/cm². Checking compression quickly and accurately..
Check Stock