Categories

Best Marine Hydraulic Oil

Prolong Super Lubricants PSL10020 Anti-Friction Metal Treatment, 1 Gallon

  • Works with all brands of synthetic and petroleum-based oils. Including full synthetic, semi- synthetic, conventional, and mineral. Gas or Diesel engines..
  • Recommended to be used in all automobile, truck, lawn, marine, agriculture and heavy-duty equipment..
  • Increases horsepower, lowers operating temperatures and reduces engine noise and vibration in all engines..
  • USAGE: Use 2 ounces per quart of oil in crankcases, 3 ounces for heavy duty and towing applications. Transmissions (Automatic or Manual) Use 1 ounce per quart of transmission fluid. Differentials use 1 ounce per quart of differential fluid. Power steering systems use 1 ounce per quart of fluid. Hydraulic fluid 1 ounce per 2.5 gallons of hydraulic fluid. Motorcycles 1 ounce per quart of fluid max. Lasts multiple fluid changes but maybe used more frequently for best results..
Check Stock

SAE O-Ring BOSS Hydraulic 212 Piece O Ring Assortment Seal Kit Buna-N 90 for Hydraulic Fittings Hoses

  • For use across a wide temperature range from -30 degrees F to 250 degrees F, Good/Excellent resistance to many petroleum oils/greases, hydraulic fluids, alcohol, mineral oil and grease.
  • Oil resistant applications of all types. Low temperature military uses. Off-road equipment. Automotive, marine, aircraft fuel systems. 70 Durometer.
  • Compatible with Aliphatic Hydrocarbons (propane, butane, petroleum oil, mineral oils and greases, diesel fuel and fuel oil).
  • Not Compatible with product fuels with a high aromatic content.
  • Chlorinated hydrocarbons (Trichloroethylene).
  • Buna N or Nitrile has good mechanical properties when compared with other elastomers and high wear resistance.
Check Stock

Johnsen's 5594 Hydraulic Jack Oil - 32 oz.

  • STA-LUBE: Sta-Lube offers a range of high performance industrial greases, gear oils, service oils, fluids, hand cleaners, additives, and lubrication formulas. Our products have been rigorously tested to meet the highest quality standards..
  • HYDRAULIC & JACK OIL: Our formula is a medium weight hydraulic oil blended of a high quality paraffinic base oil with anti-rust, anti-oxidation, anti-foam, anti-wear, and seal swell additives..
  • FORMULATION: This oil is a 20W, non-detergent oil that is compatible with all hydraulic fluids, and protects all parts in hydraulic jacks over a wide temperature range..
  • APPLICATIONS: Our hydraulic oil can be used for hydraulic systems and fluid drive units, and added to existing fluids. However, it is not suggested for use in hydraulic brakes..
  • PRODUCT SPECIFICATIONS: Available in a 32 fl. oz. or 1 qt bottle, and is made in the USA..
Check Stock

Motorkote MK-HL32-06 Heavy Duty Hyper Lubricant Engine Treatment, 32-Ounce, Single, Black

  • Works with all brands of synthetic and petroleum-based oils. Including full synthetic, semi- synthetic, conventional, and mineral. Gas or Diesel engines..
  • Recommended to be used in all automobile, truck, lawn, marine, agriculture and heavy-duty equipment..
  • Increases horsepower, lowers operating temperatures and reduces engine noise and vibration in all engines..
  • USAGE: Use 2 ounces per quart of oil in crankcases, 3 ounces for heavy duty and towing applications. Transmissions (Automatic or Manual) Use 1 ounce per quart of transmission fluid. Differentials use 1 ounce per quart of differential fluid. Power steering systems use 1 ounce per quart of fluid. Hydraulic fluid 1 ounce per 2.5 gallons of hydraulic fluid. Motorcycles 1 ounce per quart of fluid max. Lasts multiple fluid changes but maybe used more frequently for best results..
Check Stock

Mophorn Air Hydraulic Pump 10000 PSI 1/2 Gal Reservoir Hydraulic Foot Pump Air Treadle Foot Actuated for Auto Body Frame Machines and Pulling Post

  • Fundamental Parameters: The hydraulic foot pump has a maximum working pressure of 10,000 PSI, used for all 10-ton applications. Action: Single Acting, Flow Rate: 0.85 liters / 0.22 gallons per minute, Air Connection: 1/4" NPT, Output Oil Hole: 3/8" NPT, Hydraulic Oil Type: AW-32, Oil Capacity: 98 Cubic Inches / 1.6 Liters(1600 cc), Max Input Air Pressure: 120 psi / 8 bar, Fuel Tank Capacity: 1.6L ± 0.1L, Maximum Oil Output: 1.3L, Oil Output Pressure: 75mpa..
  • Foot-Actuated Design: The air hydraulic pump adopts a user-friendly foot-actuated design to provide hands-free operation for pumping and releasing the load, saving the operator's time and effort with strong power and high output pressure. The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock..
  • Sturdy & Compact Construction: This air hydraulic foot pump features an aviation aluminum pump core and a high-quality metal shell to handle tough industrial applications. 1.6L oil tank has a larger capacity with 98 cubic inches / 1.6 liters output oil. Built-in internal relief valve protects the hydraulic components regardless of hydraulic pressure..
  • Durable Oil Pipe Included: This hydraulic air pump is equipped with a 1 m /3 ft high-pressure oil pipe that f....
Check Stock

VEVOR 2510A Air Hydraulic Pump 10,000 PSI Quick Power Air Hydraulic Foot Pump 1/2 Gal Reservoir Foot Actuated Hydraulic Pump for Heavy Machinery Rigging & Auto Repair

  • Fundamental Parameters: The hydraulic foot pump has a maximum working pressure of 10,000 PSI, used for all 10-ton applications. Action: Single Acting, Flow Rate: 0.85 liters / 0.22 gallons per minute, Air Connection: 1/4" NPT, Output Oil Hole: 3/8" NPT, Hydraulic Oil Type: AW-32, Oil Capacity: 103 cubic inches / 1.7 liters(1700 cc), 0.45 gallons, Max Input Air Pressure: 120 psi / 8 bar, Fuel Tank Capacity: 1.6L ± 0.1L, Maximum Oil Output: 1.3L, Oil Output Pressure: 75mpa..
  • Foot-Actuated Design: The air hydraulic pump adopts a user-friendly foot-actuated design to provide hands-free operation for pumping and releasing the load, saving the operator's time and effort with strong power and high output pressure. The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock..
  • Sturdy & Compact Construction: This air hydraulic foot pump features a high-quality aviation aluminum pump core and shell to handle tough industrial applications. 1.6L ± 0.1L oil tank has a larger capacity with 103 cubic inches / 1.7 liters output oil. Built-in internal relief valve protects the hydraulic components regardless of hydraulic pressure..
  • Durable Oil Pipe Included: This hydraulic air pump is equipped with a 6.5 ft / 2 m high-pressu....
Check Stock

CNC Mountain Bike V Brake Set, Bicycle V Brake for Front/Rear，1Pair

  • 【Braking System】：Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way hydraulic brakes for mountain bike system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 hydraulic bike brakes uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the bicycle disc brake kit conversion of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Hydraulic disc brake adapter. Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or sc....
Check Stock

Sterling Seal ORBN022x50 Number-022 Standard O-Ring, Buna Nitrile Rubber, 70 Durometer Hardness, 1' ID, 1-1/8' OD (Pack of 50)

  • For use across a wide temperature range from -30 degrees F to 250 degrees F, Good/Excellent resistance to many petroleum oils/greases, hydraulic fluids, alcohol, mineral oil and grease.
  • Oil resistant applications of all types. Low temperature military uses. Off-road equipment. Automotive, marine, aircraft fuel systems. 70 Durometer.
  • Compatible with Aliphatic Hydrocarbons (propane, butane, petroleum oil, mineral oils and greases, diesel fuel and fuel oil).
  • Not Compatible with product fuels with a high aromatic content.
  • Chlorinated hydrocarbons (Trichloroethylene).
  • Buna N or Nitrile has good mechanical properties when compared with other elastomers and high wear resistance.
Check Stock

Mophorn Air Hydraulic Pump 10000 PSI Air Over Hydraulic Pump 1/2 Gal Reservoir Air Treadle Foot Actuated Hydraulic Pump 3/8\ NPT with 6 ft Hose 2 Connector Single Acting for Car Repair (Blue)

  • Fundamental Parameters: The hydraulic foot pump has a maximum working pressure of 10,000 PSI, used for all 10-ton applications. Action: Single Acting, Flow Rate: 0.85 liters / 0.22 gallons per minute, Air Connection: 1/4" NPT, Output Oil Hole: 3/8" NPT, Hydraulic Oil Type: AW-32, Oil Capacity: 103 cubic inches / 1.7 liters(1700 cc), 0.45 gallons, Max Input Air Pressure: 120 psi / 8 bar, Fuel Tank Capacity: 1.6L ± 0.1L, Maximum Oil Output: 1.3L, Oil Output Pressure: 75mpa..
  • Foot-Actuated Design: The air hydraulic pump adopts a user-friendly foot-actuated design to provide hands-free operation for pumping and releasing the load, saving the operator's time and effort with strong power and high output pressure. The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock..
  • Sturdy & Compact Construction: This air hydraulic foot pump features an aviation aluminum pump core and a high-quality metal shell to handle tough industrial applications. 1.6L ± 0.1L oil tank has a larger capacity with 103 cubic inches / 1.7 liters output oil. Built-in internal relief valve protects the hydraulic components regardless of hydraulic pressure..
  • Durable Oil Pipe Included: This hydraulic air pump is equipped with a 6.5 ft / 2 m hi....
Check Stock

VEPURLT Air Hydraulic Pump 10,000PSI, Air Hydraulic Foot Pump 1/2 Gal Reservoir, Air Foot Pedal Hydraulic Pump with Hose for Hydraulic Bead Breaker

  • 【Basic Info】 -The hydraulic foot pump has a maximum working pressure of 10,000 PSI, used for all 10-ton applications. Action: Single Acting, Flow Rate: 0.85 liters / 0.22 gallons per minute, Air Connection: 1/4" NPT, Output Oil Hole: 3/8" NPT, Hydraulic Oil Type: AW-32, Oil Capacity: 98 Cubic. Connector Type: 3/8" NPT quick hydraulic coupler with dust cap.
  • 【Trustworthy Security】-The air hydraulic foot pump is built-in internal relief valve, which protects the hydraulic components regardless of hydraulic pressure. The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock.
  • 【Powerful Energy】-This air powered hydraulic pump is an ideal all-around power source, for use with a variety of rams, presses, & hydraulic pullers, that develops 10,000 PSI hydraulic pressure at 100 PSI air pressure.
  • 【Matching Accessories】-Equipped with a 4ft high-pressure oil pipe that features double protection of embedded steel wires and thickened outer layer. The oil port is made of cast steel, durable and reliable. A spray gun is included to control the input and interru....
Check Stock

Mophorn Air Hydraulic Pump 10000 PSI Air Over Hydraulic Pump 1/2 Gal Reservoir Air Treadle Foot Actuated Hydraulic Pump 3/8\ NPT with 6 ft Hose 2 Connector Single Acting for Car Repair (Orange)

  • Fundamental Parameters: The hydraulic foot pump has a maximum working pressure of 10,000 PSI, used for all 10-ton applications. Action: Single Acting, Flow Rate: 0.85 liters / 0.22 gallons per minute, Air Connection: 1/4" NPT, Output Oil Hole: 3/8" NPT, Hydraulic Oil Type: AW-32, Oil Capacity: 98 Cubic Inches / 1.6 Liters(1600 cc), Max Input Air Pressure: 120 psi / 8 bar, Fuel Tank Capacity: 1.6L ± 0.1L, Maximum Oil Output: 1.3L, Oil Output Pressure: 75mpa..
  • Foot-Actuated Design: The air hydraulic pump adopts a user-friendly foot-actuated design to provide hands-free operation for pumping and releasing the load, saving the operator's time and effort with strong power and high output pressure. The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock..
  • Sturdy & Compact Construction: This air hydraulic foot pump features an aviation aluminum pump core and a high-quality metal shell to handle tough industrial applications. 1.6L oil tank has a larger capacity with 98 cubic inches / 1.6 liters output oil. Built-in internal relief valve protects the hydraulic components regardless of hydraulic pressure..
  • Oil Pipe & Spray Gun Included: This hydraulic air pump is equipped with a 1.25 m / 4 ft high-pressure oil pip....
Check Stock

PETCHOR HB-100 Line Pulling Hydraulic Disc Brake Calipers Mechanical Disc Brakes for MTB Mountain Bike E-bike and Electric Bike 2PCS Front/Rear Gold

  • 【Braking System】：Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way hydraulic brakes for mountain bike system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 hydraulic bike brakes uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the bicycle disc brake kit conversion of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Hydraulic disc brake adapter. Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or sc....
Check Stock

Happybuy 10152 PSI Hydraulic Electric Pump 750W Single Acting 110V Solenoid Pedal 7L Hydraulic Power Pack Cylinder

  • Efficient Motor: Equipped with a single-phase asynchronous motor, 750W, with aluminum shell, this electric hydraulic pump is energy efficient, powerful, and durable. Hydraulic pump working pressure: 2Mpa to 70Mpa. Rotate speed:1400r/min. Flow rate: 0.9L/min - 5L/min..
  • Large Capacity Tank: With a large fuel tank capacity, 7L, the hydraulic power pack is efficient. A visible window for monitoring the inside. The hydraulic pump tank uses the 15th hydraulic oil. It has the advantages of compact size, lightweight, and simple structure..
  • Accurate Pressure Gauge: This air hydraulic pump has a precise pressure gauge, resistant to shock, helping to observe the pressure when the pump is working at any time. From 2Mpa to 70Mpa, you can try slowly and choose the right working pressure you need..
  • Effective Oil Volume: Manage this single acting electric oil pump by a lever which has a rubber cap in one end for a comfortable grasp and use. The high-pressure oil pipe is of high quality and durability. The oil pipe coupling is fitted with an M10 thread. Connector Type: 3/8" NPT ISO 14540 quick hydraulic coupler with dust cap..
  • Various Application: The pump can be used for a variety of hydraulic equipment, working on several assignments such as lifting, pressing, bending,....
Check Stock