Categories

Best Marine Oil Pressure Sensor

WYNNsky Oxygen Sensor Remover Set, Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set, 7 Pieces O2 Sensor Socket Set

  • ...alls vacuum switch with a 7/8’’ hex and some oxygen sensors.
  • 3/8’’ Drive × 7/8’’ × 3-1/8‘’ oxygen sensor socket removes and installs oxygen sensors in domestic and many import vehicles. Slot in socket for wire clearance..
  • 1/2’’ Drive ×1-3/16’’ ×3-1/2’’ vacuum switch socket removes oil pressure sending units on late 80’s to mid 90’s GM models.
  • 1/2’’ Drive ×1-1/16’’ × 3-1/4’’ thermal sensor switch socket removes and installs thermal sensor switch on 1973-1977 CM vehicles.
  • 3/8’’ Drive ×1’’ and 1-1/16’’ ×3’’ remove oil pressure sending units. Deep design fits switches up to 2-5/8’’..
  • 1/2’’ drive ×7/8’’ ×2’’ heated oxygen sensor sockets slot in socket accommodates connectors on heated oxygen sensors.
  • 3/8’’ Drive × 7/8’’ ×1-1/4’’ low profile design for use in tight spaces..
  • This set includes 1-1/16 and 1 in. oil Pressure sending unit socket, 3/8 in. drive, 1-3/16 in. Oil pressure sending unit socket, 1/2 in. drive, 1-1/16 in. thermal sensor switch socket, 1/2 in. drive. 7/8 in. heated oxygen sensor socket, 1/2 in. drive, 7/8 in. low profile offset oxygen sensor socket, 3/8 in. drive, 7/8 in. oxygen sensor socket, 3/8 in. drive, 7/8 in. universal vacuum PVS, TVS....
Check Stock

Engine Oil Pressure Sensor/switch/sending unit with screen filter D1846A Compatible with Chevrolet Chevy Silverado GMC sierra Buick lacrosse Cadillac Escalade 2003-2008 4.8L/5.3L/6.0L/6.2L,

  • 【ABOUT REPLACEMENT ENGINE OIL PRESSURE SENSOR】 - Correct oil pressure and levels maintain proper operation of the engine. The oil pressure sensor reads the current pressure of oil which will reflect on the instrument cluster or oil pressure gauge of your vehicle..
  • 【OEM PART NUMBER】12616646, D1846A, 12677836, 12573107, 12562230,12614969, 12569323, 12562230, 12556117, 12559780,8125622300, 8125731070, 8126166460, 1S6713, PS308..
  • 【APPLICABLE MODEL】Compatible for Chevrolet/GM Equipment, Recommended replacement part for your GM vehicle’s component Offering the quality, reliability, and durability of GM OE..
  • 【MORE ADVANTAGES】(1) All engine oil pressure sensor units are 100% tested and easy to install, plug and play, very convenient. (2) In construction, we utilize high temperature, polyimide film diaphragms. These provide for exceptional cycle durability resistance to rupture oil leakage..
Check Stock

Engine Oil Pressure Sensor Switch - Replaces 12677836 D1846A 926040 12585328 - Compatible with Chevy GMC and Other GM Vehicles - Silverado Suburban Sierra Trailblazer Tahoe Grand Pri

  • Replacement Engine Oil Pressure Sensor - Correct oil pressure and levels maintain proper operation of the engine. The oil pressure sensor reads the....
  • Compatible Replacement for Chevrolet, GMC, Cadillac, Buick, Pontiac & Hummer Vehicles - 2002 - 2008 Escalade | 2003 - 2006 Avalanche 1500 | 1997 -....
  • Replaces Part# 12677836, D1846A, 926040, PS308, 12585328, 926-040, 12614969, 12616646, 1S6713 commonly found on popular select models including years....
  • OEM Fit, Quality, Finish - The engine oil pressure sensor may fail over time and cause a Check Engine Light (CEL) and throw out error codes. By....
  • Lifetime Warranty - This engine oil pressure sending unit manufactured by AA Ignition comes complete with a lifetime warranty. If the part ever fails....
Check Stock

Engine Oil Pressure Sensor - Replaces 12673134 12585328 926-041 - Compatible with Chevy GMC Buick & Cadillac Vehicles - Silverado Trailblazer Yukon Sierra Savana Suburban Tahoe Impala

  • Replacement Engine Oil Pressure Sensor with Round Connector - Correct oil pressure and levels maintain proper operation of the engine. The oil....
  • Compatible Replacement for Chevrolet, GMC. Cadillac & Buick Vehicles with Round Sensor Connectors - 2009 Allure, LaCrosse | 2009 - 2014 Escalade |....
  • Replaces Part# Replaces# 12673134, 12585328, 926041, 1S10874, 2134411, 8125969510, 8126212340, 8126731340, PS690, PS711, PS508 - commonly found on....
  • OEM Fit, Quality, Finish - The engine oil pressure sensor may fail over time and cause a Check Engine Light (CEL) and throw out error codes. By....
  • Lifetime Warranty - This engine oil pressure sending unit comes complete with a lifetime warranty. If the part ever fails on your CTS, Avalanche, SS,....
Check Stock

45RFE 545RFE 68RE Transmission Fluid Oli Pressure Transducer Sensor 04799758AD Replacement for Chrysler/Dodge/Jeep/Mitsubishi 1999-2020 by Automajor

  • PREMIUM QUALITY: Transmission Oil Pressure Sensor is made of high quality plastic and metal material, which ensures great durability. This type of material is also known for its resistance to corrosion..
  • WIDE COMPATIBILITY: Replacement for Chrysler/Dodge/Jeep/Mitsubishi Most Popular Models 1999-2020 (see description) OEM Part Number 04799758AD 4799758AF 04799758AC 05016222AA 04799758AB 04799758AD 04799758 DD72429A 601215 TCS78 AT0017 5S5389.
  • GREAT DURABILITY: Strict quality guidelines are used in the production of our Transmission Oil Pressure Sensor offering you the top quality of every set shipped to you. Designed specifically for Mopar Transmission..
  • HIGH PERFORMANCE: This Transmission Oil Pressure Sensor effectively control your transmission. It is made according to the original factory specifications, which ensures a good sealing performance and long service life. 1 Year Warranty..
  • PERFECT FIT: This Transmission Oil Pressure Sensor is a direct replacement for the old or worn one. It is easy to install and extra durable..
Check Stock

12677836 Oil Pressure Sensor Switch D1846A for Chevrolet/GM Equipment 12616646,12573107, 12562230,12614969, 12569323, 12562230, 12556117, 12559780,8125622300, 8125731070, 8126166460, 1S6713, PS308

  • 【COMPATIBLE VEHICLES NOTE】★★★Buy it with your confidence! ★★please check the description or use the year/make/model drop down bar and interchangeable part numbers to confirm the compatibility before purchase our This Engine Oil Pressure Sensor Switch..
  • 【QUALITY & FEATURES】★★In manufacturing, we utilize a laser etching system to calibrate thick film printed circuits. This provides for high accuracy reading of actual oil pressure in vehicle's engine.★★In construction, we utilize high temperature, polyimide film diaphragms. These provide for exceptional cycle durability & resistance to rupture & oil leakage. ★★★ a robust design with high grade materials to meet the stringent demands of today's service professional to insure it lasts longer..
  • 【EASY INSTALLATION】★★★All engine oil pressure sensor units are tested using automated equipment that activates the switch, checks for leaks & stresses the part to ensure specification compliance, even under the most demanding operating conditions. simple structure, easy to install, plug and play, very convenient.★★★ Only 10 mins less for installation.Save your time and money, check youtube video if you have installation problem..
  • 【REPLACES PART & MODEL】 Replaces# 1267....
Check Stock

ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm (7/8in), 27mm, 29mm – All Vehicle O2 Removal and Installation

  • NO MORE HASSLE: The ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm (7/8” Inches), 27mm, 29mm – All Vehicle O2 Removal and Installation is for inspection, removal, and installation of hard-to-reach oxygen sensors, oil pressure switches, oil pressure sending units, thermal sensor switches, vacuum switches, and brake light switches.
  • Each socket is permanently etched with size marking for your convenience.
  • MATCHES YOUR CAR: Universal fit for Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda, Vauxhall/Open (GM), and Volkswagen.
  • Sizes include 22mm (7/8”), 27mm, and 29mm.
  • For both heated and non-heated oxygen sensors.
  • Compatible with 3/8-inch and 1/2-inch ratchet drivers or extensions.
  • Side cutout sections allow the sockets to fit over wiring harness and prevent damage to wires.
  • BUILT TO LAST: Constructed from chrome-vanadium steel (CR-V) for extra strength and longevity.
  • Tools have a light coating of oil to protect them from rusting.
  • EASY STORAGE: Heavy-duty 9” x 2.25” x 8” inch (22.9cm x 5.7cm x 20.3cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • CONTENTS: Package includes (1) 29mm pressure/vacuum switch 6pt socket + (1) 22mm (7/8 inch) vacuum switch 6pt socket + (1) 22mm (7/8 inch) v....
Check Stock

GEARWRENCH 8 Pc. Sensor and Sending Socket Set - 41720

  • Designed for the removal and installation of oxygen sensors, oil pressure sending units, and vacuum switches.
  • Includes 3/8" drive 7/8" slotted socket for PVS, TVS and O2 sending units.
  • Includes 3/8" Drive 7/8" (22mm) socket for Oxygen Sensor Units.
  • Includes 3/8" Drive 1-1/16" Deep socket for Oil Pressure Sending units.
  • Includes 3/8" Drive 7/8" (22mm) Low Profile Offset socket for O2 Sensor Unit.
  • Includes 1/2" Drive 1-13/16" socket for Oil Sending Unit.
  • Includes 1/2" Drive 1-1/16" socket for Thermal Sensor units.
  • Durable blow mold case for safe storage and tool retention.
Check Stock

ROUSHUN 5" Capacity Rain Gauge Glass Replacement Tube for Yard Garden Outdoor Home (Pack of 2)

  • 【Clearly】Once the ignition switch is turned on, a clear display appears by colored LED illumination.Red and blue give you the clearest data at night..
  • 【Packge】It include water temperature sensor,oil temperature sensor and oil pressure sensor,that gives you the most detailed car information,like Water Temp Unit,Oil Temp Unit,Oil Pressure Unit and Nater Pressure Unit..
  • 【Visual Automatic】5 inch diameter, with black face, smoked lens and super bright LED background light. The gauge dial and the needle pointer provide high visibility.Self-Calibration mode at start-up and Adjustable setting for shift light..
  • 【100% Guarantee】If the product is damaged or can not be used, the customer can contact us, we will provide customers with satisfactory solutions.Customers can rest assured that the use of..
Check Stock

8MILELAKE 10pcs Oxygen Sensor Socket Set Sensor Oil Pressure Sending Unit Socket Set

  • 10Pcs Sensor Oil Pressure Sending Unit Socket Set Oxygen Injection Tool Set Remove Oxygen.
  • Sensors, Injectors, Oil Pressure Sending Units And Vacuum Switches. Heat-treated Chrome.
  • Vanadium And Chrome Molybdenum Steel With Black Oxide Finish Accepts Either 3/8 Or 1/2"".
  • Drive Ratchet Depending On The Size of The Socket 10Pc Oxygen Sensor & Diesel Injection Oil.
  • Pressure Unit Vacuum Switches Socket Set Heat Treated Chrome Vanadium & Chrome Molybdenu.
Check Stock

ICP Sensor with Harness Kit, Injection Control Pressure, Compatible with Ford Vehicles - 7.3 Powerstroke E350, F250, F-350 Super Duty - Replaces F6TZ-9F838-A, F4TZ9F838A, 1807329C92, CM5227

  • Replacement Injection Control Pressure Sensor - The ICP sensor or Injection control pressure sensor is found on 's Powerstroke 7.3 L diesel engines. The ICP sensor is responsible for monitoring oil pressure being passed on to the PCM to pressurized fuel injectors using the IPR (Injection Pressure Regulator) for proper vehicle operation..
  • Compatible Replacement for Ford Vehicles With 7.3L Powerstroke Engines - 2003 E-350 Club Wagon | 1995 - 1998 E-350 Econoline | 1995 - 2002 E-350 Econoline Club Wagon | 2000 - 2003 Excursion | 1994 - 1996 F-250 | 1999 - 2003 F-250 Super Duty | 1994 - 1997 F-350 | 1999 - 2003 F-350 Super Duty |. The ICP sensor can easily be located inside the engine bay behind the alternator..
  • Replaces Part# 1807329C92, ICP102, F4TZ-9F838-A, F6TZ-9F838-A, CM5227. This ICP sensor found on 's 7.3L Powerstroke engines are popular for having oil leaks. If you are experiencing oil coming out of the ICP Sensor's electrical connector, weird noises on idle during first starts, hesitation or misfires then you may have a problem with your ICP sensor..
  • OEM Fit, Quality, Finish - While this is NOT a g....
Check Stock

TUPARTS Oil Pressure Sensor Switch Fit for 03-09 for Nissan 350Z,05-08 for Nissan Armada, 2004-2009 for Nissan Pathfinder, 2004-2008 for Nissan Titan, 2005-2009 for Nissan Xterra PS417 25070-CD00A

  • ONLY FIT - Oil pressure sensor for 2004 2005 2006 2007 2008 2009 for Infiniti QX56, 2003 2004 2005 2006 2007 2008 2009 for Nissan 350Z, 2005 2006 for Nissan Altima, 2005 2006 2007 2008 for Nissan Armada, 2005 2006 2007 2008 2009 for Nissan Frontier, 2009 2010 for Nissan GT-R, 2004 2005 2006 2007 2008 2009 for Nissan Pathfinder, 2009 for Nissan Sentra, 2004 2005 2006 2007 2008 for Nissan Titan, 2005 2006 2007 2008 2009 for Nissan Xterr.
  • SENSOR NUMBERS - PS417, 201-2368, 1S6896, PS561, 25070-CD000, 25070-CD00A.
  • SENSOR QUALITY - Full sealing structure makes the products impact resistance, overload capacity and product sealing performance greatly improved.Thus ensure our oil pressure sensor have most reliable performance and long life time.
  • SENSOR FEATURES - Oil pressure sensor for durable built and precisely designed for improved vehicle engine performance. Easy to install and use.
  • Tips - Please check year/make/model of your vehicle with the part finder tool on the top left corner to confirm compatibility before purchase.Please contact us via email if you have any question.
Check Stock

Zerodis CO2 Refilling Adapter, Adjustable CO2 Cylinder Refill Adapter Valve CO2 Tanks Bottle Connector Accessories 3000psi Pressure Gauge

  • Works for oil,fuel,diesel,gas,water,air pressure. Can be used in oil tank,gas tank,diesel tank etc..
  • It's an advance pressure sender than traditional mechanical pressure sender.
  • CMC for Pressure and Pull Pressure Sensor..
  • Input 5V DC,Output: 0.5V – 4.5V linear voltage output.
  • Package Include: 1 X Pressure Transducer.
Check Stock