Categories

Best Marine Press Stud Kits

1 Pair Marine Terminal and Post Washer Set, Positive & Negative Car Battery Terminal Connectors Clamp For Truck Van Marine Boat

  • Converts standard top posts for use in marine or other stud-type applications.
  • Colour-coded finish for added corrosion resistance.
  • Easily replace your boat battery’s terminal ends with high performance sensitivity.
Check Stock

Ear Piercing Gun Kit, 233PCS Self Piercing Earrings Set, Nose Navel Lip Ears Piercer Body Piercing Tools, Earring Piercer with Hypoallergenicear Piercing Needle Kit for Salon & Home

  • 【Easy to Use】1. Pull back the Tension Regulator. 2. Place a piercing stud in the Adapter hole. 3. Pull the Trigger, the aiming slot is used as a guide for aim, please make sure the point of the stud is straight going to the aiming slot. 4. Press FIRE, forcing the stud through the flesh..
  • 【Painless Ear Piercing & Wide Application】This cartilage piercing kit can be widely used for beginner and professional users. Also, the body piercing gun is suitable for professional use or home use. If used correctly, it is painless..
Check Stock

Body Piercing Needles，2 Sizes Body Piercing Needle Pusher 316L Steel Holder Piercing Tools(S)

  • 1# Package: This nose piercing kit includes 2pcs piercing gun + 2pcs built-in nose stud + 2pcs clean tools. It can be used for beginners or professionals..
  • 2# High Quality: 100% brand new and high quality.All piercing studs are made of medical class stainless steel..
  • 3# Special reminder: The nose piercing kits is a one-time product. Once pressed, it cannot be restored. please do not "try" or "test" by pressing it.Not reusable..
  • 4# Easy: Easy to operate, Be sure to press it all the way down, hear a "click", and then release your hand, the needle tip will enter the nose plug, the nose plug will fall off naturally, and the puncture is completed.Note: Press hard at one point, otherwise you can only puncture half..
  • 5# Satisfaction Promise: If there is any dissatisfaction with the product, please contact us feel free time. Refund or exchange are acceptable..
Check Stock

323 Piece Canvas Snap Kit, Meifuly Marine Grade Stainless Steel (Caps, Sockets, Screws, Fabric Base Components) for DIY Cover, Canvas Snap Kit with Material Hole Punch and Setting Tools

  • 【Package Includes】Canvas Snap Kit Tool includes 90 Caps, 90 x 3/8” Sockets, 50 Fabric Base Studs, 50 Posts, 40 x 5/8” Solid Base Stud Screws, 1 x Hole Punch, 2 x Setting Tools and a transparent plastic box, convenient for classified storage and carry..
  • 【Materials】Marine snaps kits are made of 100% brand new marine grade high quality stainless steel snaps, which will last long. Fit for various environments for a long time usage..
  • 【Easy To Use】The kit also includes a material hole punch to cut clean holes into the material that will speed up the installation process. For your convenience, Our repair kit also includes the fabric base components as well as the solid surface base screw component. Our products are specially designed for you!.
  • 【Wide Application】Canvas Snaps Button Screw are widely used for canvas, tarpaulins, tents, awnings, sailcloth, clothing, leather, furniture, lawn furniture, and etc. Can be attached to surface. Fit for both the indoor or outdoor use. Perfect for DIY..
  • 【Our Sincere Service】Meifuly is a company with R&D and production capabilities, and our goal is to provide you with high-quality products. Any problems or after sales about our products, please feel free to contact us. We will try our best to solve pr....
Check Stock

POWERTEC QNB3010 5-Star Stud Knob, 1/4\-20, 2\ Long, 5 PK , Black

  • INCLUDES: 5-Star Knobs with 1/4”-20 Threaded Studs (pack of 5).
  • FUNCTION: Provides safe, secure hand-grip – allowing you to position, tighten or hold your equipment in place.
  • CONVENIENT: Perfect tool-less studded knob replacement fastener and an alternative to similar sized handles, or round knobs with projected studs.
  • APPLICATIONS: Ideal for heavy-duty clamping jobs, t-track assemblies, hand tools, feather boards, saw fences, drill press, woodworking jig making kits and fixtures.
  • PREMIUM DESIGN: Features a black, thermoplastic construction with a five star grip, matte black finish and a molded-in threaded stud engineered out of zinc plated steel.
Check Stock

270pcs Heat Shrink Connectors Crimping Tool, Waterproof Automotive Marine Electrical Terminals Kit, Ring Hook Fork Spade Butt Connectors Splices, Connectors Kit Assortment for Automotive and Marine

  • 【MULTIPURPOSE USE】The terminal connectors are highly sealed , corrosion-resistant, provide reliable performance, and can withstand harsh environments. Suitable for all kinds of equipment switches, batteries, cars and household, electronic components with pins etc. Perfect for marine and automobile applications..
  • 【WORRY-FREE SERVICE】 We are so confident in our product that we offer a 1-year warranty for every customer. Enjoy your shopping and feel free to contact us!.
Check Stock

200 Amp Circuit Breaker, 0-8 Gauge Trolling Motor Car Stereo Audio Inline Fuse Block Holders Inverter, Switch for Automotive Rv Marine Boat Truck, 12-48 Volt DC Breaker with Hexagon Key Tool

  • 【Ignition Protection】The 200 amp marine circuit breaker can protect car audio, low-voltage, and high-current electrical equipment from current overload damage. The 200 amp fuse block protects your trolling motor from electrical damage, prevents excessive current and stops power surges from damaging Amps.
  • 【Unique safety design】The 200 amp marine circuit breaker is Car Audio Fuse Holders 200% Pass professional electrical performance test and aging test, the 200 amp marine circuit breaker is Car Audio Fuse Holders 200% Pass professional electrical performance test and aging test, switch button is smooth, The dc circuit breaker is no stuck state. The dc circuit breake water resistant housing, protective stud insulator included, splash & dust Proof..
  • 【Specification】The dc circuit breake Voltage 12-48V DC, compatible with all 12V/24V Systems. Waterproof, Including Copper accessories, Ambient temperature: -32 ° c to 82 ° c (-25 ° f to 180 ° f) ..
  • 【Installation & Application】The dc 12v circuit breake is surface mount, mount on firewall or panel. Water resistant housing, protective stud insulator included. typically used in auxiliary or accessory circuits for boat, caravan,marine, winch, RV, tractor and ATV applications..
Check Stock

CKE 40 Pack Stainless Steel Invisible Receiver and Swage Stud End for 3/16 Inch Cable Railing, Deck Stair Threaded End Fitting for Wood & Metal Post

  • Features: These fittings are used for 3/16" wire rope cable and compatible for installation on exterior decks, marine rigging, or interior applications. With a inner hexagon screw on the top. Invisible and concise appearance after being installed..
  • Marine Grade Material: Made of T316 Marine Grade stainless steel, which with excellent resistance to rust and seawater, high tensile strength and anti-fatigue strength weatherproof. 【CKE Cable Railing Promised】All of CKE T316 Cable Railing will not rust in normal using situation even after installed 10 years, if not, we will offer warranty with full refund..
  • Size: Overall length of the Receiver: 2.25", Threaded stud length: 2.75", Assembled and Fully Threaded size: 2.95"..
  • Applications: Provide for a DIY cable railing project, it can be used on all sorts of posts in wood or metal. Suitable for indoor or outdoor applications..
  • Package: 40 Pack Stainless Steel Invisible Receiver and Swage Stud End + 1 Pack Allen Wrench.
Check Stock

Stainless Steel Handrail Wall Bracket Pulsar by Inline Design

  • Suitable for flat or round top rail (adapter included).
  • Satin/Brushed Finish Stainless Steel AISI 316 Marine Grade for outdoor and indoor areas.
  • Suitable for round handrail of 1 1/2" to 1 3/4" diameter.
  • Mountable into wood stud, steel stud, or concrete.
Check Stock

Marine Canvas Snap Button Kit 90 PCS Stainless Steel Canvas Snaps Boat Cover Snap Button Fastener Kit & 3PCS Setting Tool Marine Grade 0.53 Socket 0.59 Screw Snaps for Boat Cover Furniture DIY

  • 【HIGH QUALITY MATERIAL】Snaps kits are Made of marine grade stainless steel, rust resistance in salt water applications, withstand daily wear, they....
  • 【WIDE APPLICATION】This canvas snaps screws widely are Widely used for Canvas, Tarpaulins, Tents, Awnings, Sailcloth, Clothing, Leather, Furniture,....
  • 【USE ATTENTION】please don't use too much force when strike the fasteners in case of deformation..
  • 【WHAT TOU GET】Snaps stud set includes 30 pcs screw + 30 pcs socket + 30 pcs cap, 3 pcs setting tool, storage boxes x 1pcs..
  • 【24 HOUR CUSTOMER SERVICE】If you have any questions, please feel free to contact us, we will solve it for you until you are satisfied..
Check Stock

Toolly 103pcs 15mm Stainless Steel Fastener Snap Press Stud Cap Button Marine Boat Canvas (4 Components, 26pcs for Each), with 3 Setting Tools for DIY Craft Sewing

  • 【103Pcs Fasterner Set】This 103Pcs Fasterner Set will help you complete your work effectively: 25 Sets Silver Snap Fasteners (Popper+Press+Stud+Button), 1pc x Punching Hole.
  • 1pcx Round Base. The sufficient quantity will satisfy your various sewing needs..
  • 【PREMIUM QUALITY】The snap buttons are made of Marine Grade 304 Stainless Steel, the post of the cap is ONLY 5mm. Will NOT suitable for the thick leather..
  • 【GENUINE STAINLESS STEEL CAP, SOCKET, STUD & POST】Stainless Steel Fastener Snap Set will not rust or corrode even in salt water environment..
  • 【PRACTICAL SETTING TOOLS】The included punching tools and anvil make sure quick and easy installation even if you're a novice. Big convex for cap unit, Small convex for post unit..
  • 【WIDELY USAGE】Both sides of rivets have a cap that make it looks good.
  • These leather rivets can be applied for DIY crafts or clothing such as shoes, hats, jeans, windbreaker, down jacket, jackets and so on. It will be your practical and replaceable items and necessary assistants in your daily life, bring you pretty and nice effect..
Check Stock

1 3/4 dia., 5/16-24 thds., Four Prong Plastic Knob Black Glossy Phenolic w/Blind Hole Brass Insert (1 Each)

  • INCLUDES: Black 4-Arm Knobs with 1/4”-20 Threaded Studs (pack of 5).
  • FUNCTION: Provides safe, secure hand-grip – allowing you to position, tighten or hold your equipment in place.
  • CONVENIENT: Perfect tool-less studded knob replacement fastener and an alternative to similar sized handles, or rounded knobs with projected studs.
  • APPLICATIONS: Ideal for heavy-duty clamping jobs, t-track assemblies, hand tools, feather boards, saw fences, drill press, woodworking jig making kits and fixtures.
  • PREMIUM DESIGN: Features a black, thermoplastic construction with ample finger grip spacing, a matte black finish and a molded-in threaded stud engineered out of zinc plated steel.
Check Stock

(Red) 12 Terminal Distribution Block -BUSBAR- with Ring Terminals

  • 1/4″ Stud – 12 Terminal Red Power Distribution Block For a Variety Of wiring Scenarios.
  • Includes 12x nylon 16-14 awg #8 1x nylon 12-10 awg 1/4 1x nylon 8 awg 1/4 1x nylon 6 awg 1/4.
  • 12 Stainless Steel #8-32 Terminal Screws and Stainless Stud Will Not Rust Or Corrode In Wet Environments.
  • Use In Automotive Or Marine Environments Where A BusBar Or Junction Block Is Needed.
  • Rated For 180 amps @ 12 vdc = 15 amps / connection & Max Volts = 48 vdc.
Check Stock