Categories

Best Marine Steering Gear Housing

Barco Sin Timón (Plena)

  • 【COMPLETE ACCESSORIES】It comes with 13.5" Steering Wheel, Swivel Helmet, Standard 3/4" Tapered Steering Axle.
  • 16ft Steering Cable, Hardware, 90 Degree Bezel Kit..
  • 【High Quality Material】The steering kit is made of cast steel and 304 stainless steel seamless tube and corrosion resistant material, which is durable and stable. The rotary rudder is well welded, well polished, and of good size. The cables are made of stainless steel and high-quality rubber to ensure the surface is free from corrosion, rust, cracks and leaks and to keep the accessories shiny. Flat interface design, better and stronger marine steering system kit..
  • 【Easy To Install】The marine steering kit is easy to assemble, you don't have to configure the parts separately, it can be adjusted according to your needs..
  • 【Easy Operation】This rudder system is designed to minimize your effort to drive the boat and make the boat turn accurately to ensure you have a pleasant boating experience every time you use it..
  • 【Wide Application】Specially designed and developed for marine use. This outboard steering kit is suitable for mechanical/manual steering of yachts, fishing boats, electric push boats and other water vehicles..
Check Stock

Rareelectrical MARINE COATED STARTER COMPATIBLE WITH VOLVO PENTA 4.3L 5.0 5.7 350 1998-UP 30450 9000819 3854751 TM000A24301 SAE J1171

  • ... STARTER HAS AN 11 TOOTH PINION THAT WILL REPLACE THE OLDER STYLE 9 TOOTH MODELS. FITS MERC, OMC, VOLVO V6 38.
  • V8 ENGINES- GM BLOCK USING A 14.5 INCH FLYWHEEL..
  • UNIT TYPE: DELCO, MERCURY MARINE,TYPE: PMGR,VOLTAGE: 12 VOLTS,KW: 1.7 KW,ROTATION: CW,TEETH/SPLINES: 11 TEETH/SPLINES,PINION/SPLINES OD: 29.5MM / 1.161IN,DE HOUSING NUMBER: 371-12182,MOUNTING HOLE 1: 10.0MM ID UNTHREADED,MOUNTING HOLE 2: 10.0MM ID UNTHREADED,APPROXIMATE WEIGHT: 9.435 LBS / 4.29 KG.
Check Stock

Mophorn Outboard Boat Steering 13 Boat Steering Cable 13 Feet Outboard Steering kit 3/4 Tapered Shaft for Boat Steering

  • High-Performance Rotary Steering System: The VEVOR boat steering system kit is specially designed and developed for marine use. It comes with a 13 ft steering cable, a standard 3/4" tapered shaft, a swivel helmet, a 90-degree bezel kit, and hardware. Enables the vessel to steer accurately and improves work efficiency. Take control of your boat, and create waves all summer long..
  • 13 Feet Steering Cable: Our marine flat steering design allows for a firmer control that outshines the competition. And the steering cable meets the precise steering requirements of different types of rudders and cylinders. Please verify if the cable length matches your application..
  • Durable & Robust Rotary Helm: Characterized by its premium alloy material, the rotary helm is rust-proof and resistant to wear. Heavy-duty material ensures longevity and easy maintenance. Adjustable nuts are used to secure the rudder..
  • Quick Installation: With complete accessories, the marine steering kit is easy and quick to assemble as you don't have to configure the parts separately. Besides, a simple snap-in cable connection and different mounting hardware are provided to ensurefast installation. Get ready to set sail and conquer all waters..
  • Wide Application: Traditional mechanical steering ....
Check Stock

Bestauto Outboard Steering System 15' Outboard Steering System 15 Feet Boat Steering Cable with 13" Wheel Durable Marine Steering System

  • High-Performance Rotary Steering System: The VEVOR boat steering system kit is specially designed and developed for marine use. It comes with a 15 ft steering cable, a standard 3/4" tapered shaft, a swivel helmet, a 13.5" steering wheel, a 90-degree bezel kit, and hardware. Enables the vessel to steer accurately and improves work efficiency. Take control of your boat, and create waves all summer long..
  • 15 Feet Steering Cable: Our marine flat steering design allows for a firmer control that outshines the competition. And the steering cable meets the precise steering requirements of different types of rudders and cylinders. Please verify if the cable length matches your application..
  • Durable & Robust Rotary Helm: Characterized by its premium alloy material, the rotary helm is rust-proof and resistant to wear. Heavy-duty material ensures longevity and easy maintenance. Adjustable nuts are used to secure the rudder and wheels..
  • Quick Installation: With complete accessories, the marine steering kit is easy and quick to assemble as you don't have to configure the parts separately. Besides, a simple snap-in cabl....
Check Stock

Bestauto Outboard Steering System 10 Boat Steering Cable 10 Feet Marine Steering System 3/4 Shaft with 13.5 Inch Wheel for Yachts and Waterborne Vehicles

  • High-Performance Rotary Steering System: The VEVOR boat steering system kit is specially designed and developed for marine use. It comes with a 10 ft steering cable, a standard 3/4" tapered shaft, a swivel helmet, a 13.5" steering wheel, a 90-degree bezel kit, and hardware. Enables the vessel to steer accurately and improves work efficiency. Take control of your boat, and create waves all summer long..
  • 10 Feet Steering Cable: Our marine flat steering design allows for a firmer control that outshines the competition. And the steering cable meets the precise steering requirements of different types of rudders and cylinders. Please verify if the cable length matches your application..
  • Durable & Robust Rotary Helm: Characterized by its premium alloy material, the rotary helm is rust-proof and resistant to wear. Heavy-duty material ensures longevity and easy maintenance. Adjustable nuts are used to secure the rudder and wheels..
  • Quick Installation: With complete accessories, the marine steering kit is easy and quick to assemble as you don't have to configure the parts separately. Besides, a simple snap-in cable connection and different mounting hardware are provided to ensurefast installation. Get ready to set sail and conquer all waters..
Check Stock

CREDSTAR Boat Steering Control Cable 16“ Outboard Mechanical Rotary Steering Kit 16 Feet Boat Power Steering System

  • Rotary Helm, 16 ft Steering Cable, Hardware, 90 Degree Bezel Kit, Standard 3/4'' tapered steering shaft..
  • Made of cast steel and 304 stainless steel seamless pipe and corrosion-resistant materials, this steering kit is durable and steady..
  • With complete accessories, the marine steering kit is easy and quick to assemble as you don't have to configure the parts separately. Besides, a simple snap-in cable connection and different mounting hardware are provided to ensure fast installation..
  • This outboard steering kit is designed and developed especially for marine use..
  • The boat steering system,allowed the boat to steer accurately and improve working efficiency..
Check Stock

GDNTMU 2 Stroke 2.3HP Outboard Motor Boat Engine Heavy Duty Fishing Boat Engine Water Cooling CDI System 8500r/min(US Stock)

  • 【MULTI-FUNCTIONAL OF TWO-STROKE MOTOR 】- 2-STROKE motor is fixed on the outside of the beam and is designed to pivot on its mounting seat to control the direction of thrust. Therefore, in addition to providing propulsion, the outboard also provides steering control and a perfect balance of power and efficiency. When the engine is not running, Skeg can also act as a rudder. Note that the motor must be started underwater..
  • 【MARINE LIGHT AND SMALL OUTBOARD ENGINES FOR KAYAKS AND CANOES (MARINE ENGINES) 】- Increasing low horsepower (two-stroke) outboard engines can strengthen boats such as kayaks and canoes. Two-stroke engines are louder, less fuel efficient, and maintainable, but they provide higher performance. If the rower?s arms become too tired and/or need to paddle hard, an electric motor can be helpful..
  • 【ADVANCED AIR COOLING SYSTEM 】- Advanced engine water cooling system can improve engine performance. The air cooling system allows you to fish all day without overheating. Due to water quality issues, air cooling eliminates the time for the pump part, which is very useful for daily use..
  • 【ADDITION FUNCTIONS】 - Features 360 degree steering rotation for reverse without gear shifting.Start-In-Gear protection/clutch feature prohibits prop....
Check Stock

ISURE MARINE 316 Stainless Steel Boat Steering Wheel Knob, Steering Wheel Maneuvering Knob Dia. from 5/8'' to 1''

  • ✔Fits most steering wheels with rim Dia. from 5/8'' to 1''（Please check the your Steering wheel Rim Dia. before purchase）.
  • ✔ Material: Marine Grade Aisi 316 Stainless Steel.
  • ✔Bearing spinning knob allows to maneuver the steering wheel quickly..
  • ✔ Package Included: 1 Marine Boat Steering Wheel Knob.
  • ✔Shape provide comfort grip while maneuver..
Check Stock

CREDSTAR Boat Steering Control Cable,for Outboard Steering Cable 16 Feet Mechanical Rotary Steering Kit for Boat Steering System

  • Rotary Helm, 16 ft Steering Cable, Hardware, 90 Degree Bezel Kit, Standard 3/4'' tapered steering shaft..
  • Made of cast steel and 304 stainless steel seamless pipe and corrosion-resistant materials, this steering kit is durable and steady..
  • With complete accessories, the marine steering kit is easy and quick to assemble as you don't have to configure the parts separately. Besides, a simple snap-in cable connection and different mounting hardware are provided to ensure fast installation..
  • This outboard steering kit is designed and developed especially for marine use..
  • The boat steering system,allowed the boat to steer accurately and improve working efficiency..
Check Stock

Ideal Micro-Gear 5/16 in to 7/8 in SAE 6 Silver Hose Clamp Stainless Steel Marine

  • Micro-Gear 62M clamps are tiny, tough and precision-engineered for use in small hose applications. Their slim 5/16 in. band and low profile housing make them easy. Micro-Gear 62M is an all 300-grade stainless steel marine grade clamp..
  • Minimum Hose Size Compatibility: 5/16 in..
  • Maximum Hose Size Compatibility: 7/8 in..
Check Stock

Aluminum Axle Front & Rear Axle for 1/10 RC Crawlers Axial Wraith 90018 90048 90053

  • Suitable for Wraith 90018 90048 90053 RR10 1/10 RC Rock Crawler Complete Alloy Front and Rear Axle Assembly Parts Upgraded .
  • Machined from aluminum and anodized for good looks.
  • Material: Aluminium Alloy( Housing ,Steering Rod) and Steel alloy (Gear, CVD Driveshaft).
Check Stock

Single DIN Marine Digital Media USB AUX Bluetooth Radio Stereo Receiver Bundle Combo with Metra Steering Wheel Interface Antenna - 40 1998-2013 Harley Single-DIN Stereo Installation Kit

  • PACKAGE INCLUDES: 1 X Single DIN Marine Digital Media Bluetooth USB AUX Receiver, 1x Metra Steering Wheel Interface, 1x Antenna - 40 ", 1x 1998-2013....
  • RECEIVER: This marine/motorsports single-DIN digital media receiver comes packed with an array of features sure to boost your vehicle's infotainment....
  • STEERING WHEEL CONTROLLER: Adding the Steering Wheel handlebar control interface enables retention of functionality of your factory steering wheel....
  • ANTENNA: This rugged Enrock EKMR2 marine soft wire universal antenna has a flexible wire that makes it the perfect hideaway antenna, while the durable....
  • STEREO INSTALLATION KIT: Enrocks EHDRAB98-13 allows you to install a single din receiver into your Harley Touring Bike. The wire harness is included....
Check Stock

SOUTHWEST SPEED POWER STEERING CONVERSION KIT,COMPATIBLE WITH 76-86 JEEP CJ5 CJ7,20:1 GEAR BOX,1400 SERIES POWER STEERING PUMP,V-BELT PULLEY,PITMAN ARM,TELESCOPING STEERING SHAFT,LINES,HOSES,FITTINGS

  • Southwest Speed Heavy Duty Manual to Power Steering Gear Box Kit with 20:1 Gear Ratio, and 1400 Series Performance Power Steering Pump that fits 1976-1986 Jeep CJ > This Southwest Speed Steering Gear Box Kit includes Southwest Speed Re-manufactured Heavy Duty Factory Replacement Power Steering Gear Box featuring a 20:1 Gear Ratio with 13/16"-36 Input Shaft, and 1 1/8"-32 Spline Output Shaft.
  • Kit Includes: | Southwest Speed Re-manufactured 1976-1986 Jeep CJ Replacement Heavy Duty Power Steering Gear Box (# 105-2974) > Engineered for superior durability > O-Ring Ports > O.E. Spool Valves > Heavy Duty Gears > 20:1 Gear Ratio > 13/16"-36 Input Shaft > 1 1/8"-32 Spline Output Shaft > 2.750" Standard Piston Diameter > 18mm O-Ring Pressure Fitting > 16mm O-Ring Return Fitting.
  • Southwest Speed Re-manufactured 1976-1986 Jeep CJ 1400 Series Performance Power Steering Pump (# 149-1622) > Fits Jeeps with 258/304/401 cu. in. engines, as well as 4.0 Liter, with the OE Can > Re-manufactured > Perfect pump for rock crawlers > 1400 Series Pumps are Identical to the 1300 Series Pumps but are manufactured with much stronger components > Larger Ring and rotor which displaces more fluid per revolution.
  • Southwest Speed 1976-1986 Jeep CJ 5 3/4" Power Steering Pump V-Belt....
Check Stock