Categories

Best Marking cutting Processing

DIXON Industrial Reach- Deep Hole Mechanical Pencil with 25' Tape Measure (14302)

  • ...s, which can be applied for deep holes or hard to mark places.
  • The pen tip writes smoothly and continuously, not easy to smudge or smear, making your wood working easier.
  • The long nib deep hole pen can be applied on a variety of surfaces such as wood, metal, glass and plastic, suitable for home decoration, hardware processing, automotive manufacturing, industrial processing and more.
  • Quality Plastic and Metal Materials: these deep reach marking pens are made of plastic pen case and metal long nib, sturdy and easy to use.
  • These pens have clip design, which can be clipped to pocket, folder or notebook, not easy to lose.
  • With a slim and round shape and non slip surface, it is comfortable in the hand and more convenient to use.
  • Precise and Strict: the deep hole marker pens metal shaft is approx. 3 mm wide and has a reach of 30 mm, and has a felt tip of 2 mm that will provide the strictest precision, suitable for use on most dry and wet surfaces.
  • Nib Replacement: If your long head marker pens are worn out, you can replace them by removing them with a pair of pliers and replacing the old nib.
  • If the nib is too worn to hold with pliers, unscrew the marking head, push the foam into the barrel, and push the rear of the nib out of the back.
Check Stock

CDBP GTN-4 (SP400) CNC Grooving Carbide Inserts Steel Fit for SPB426/32 Lathe Grooving Cutting Tools, CVD Yellow Coating, 10pcs (BP400-P)

  • Size, SP400,Width(B): 4.14mm, Radius(R): 0.25mm, Longth(L): 11mm, fit for Korloy grooving holder..
  • CVD coated yellow color grade, universal grade, suitable for steel and cast iron continuous cutting and interrupted cutting finishing to roughing. Grade with a wide range of applications. Stainless steel continuous cutting and interrupted cutting..
  • Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing..
  • Long processing life, competitive price, high cost performance, with better working, suitable for stailess steel, carbon steel and heat-resistant steel processing. A high the thermal shock resistance, suitable for light interrupted cuts..
  • CDBP multifunctional tools can be used in different applications, such as parting, grooving, turning, end face and profiling machining. Unique installation and chip-breaker can ensure excellent performance and production efficiency..
Check Stock

CDBP GTN-4 (SP400) CNC Grooving Carbide Inserts Steel Fit for SPB426/36 Lathe Grooving Metal Cutting Tools, 10pcs

  • Size, SP400, Width(B): 4.14mm, Radius(R): 0.25mm, Longth(L): 11mm.
  • General material for parting and grooving processing, a nanocomposite coating of a AITiSi base, high temperature stability, good hardness. Small friction coefficient, reduce the adhesion between workpiece and insert cutting edge..
  • Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing..
  • Long processing life, competitive price, high cost performance, with better working, suitable for stailess steel, carbon steel and heat-resistant steel processing. range, A high the thermal shock resistance, suitable for light interrupted cuts..
  • CDBP multifunctional tools can be used in different applications, such as parting, grooving, turning, end face and profiling machining. Unique installation and chip-breaker can ensure excellent performance and production efficiency..
Check Stock

CDBP Carbide Grooving Inserts MRMN400-M for MGEHR/L and MGIVR/L Grooving Cut-Off Tool Holder, Installed with KOLORY, CVD Yellow Coating, 10pcs

  • Size, MRMN400-M, Width(B): 4mm, Radius(R): 2mm, Longth(L): 21mm, High(S): 4.8mm..
  • CVD coated yellow color grade, universal grade, suitable for steel and cast iron continuous cutting and interrupted cutting finishing to roughing. Grade with a wide range of applications. Stainless steel continuous cutting and interrupted cutting..
  • Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing..
  • Long processing life, competitive price, high cost performance, with better working, suitable for stailess steel, carbon steel and heat-resistant steel processing. A high the thermal shock resistance, suitable for light interrupted cuts..
  • CDBP multifunctional tools can be used in different applications, such as parting, grooving, turning, end face and profiling machining. Unique installation and chip-breaker can ensure excellent performance and production efficiency..
Check Stock

Mingo The Firewood Marker

  • ...HE US: The Mingo Marker firewood measuring tool is proudly manufactured in Alabama, giving customers the perfect firewood measure every time. The Mingo Marker is the perfect firewood measuring tool for your outdoor logging needs.
  • COMPLETE LOGGING ACCESSORY: The bundle includes the orignial Mingo Marker, 14", 16",18" marking wheels and an extra trigger. The bundle is the ideal chainsaw firewood measuring tool by creating precise and accurate firewood measuring tool for your logging needs..
  • THE PERFECT LOGGING COMPANION: The firewood marker is lightweight and durable for all of your chainsaw cutting and firewood cutting projects. No matter the weather conditions the log marking tool will be able to provide the desired markings every time. All that is needed is a inverted surveyor style marking spray and you're ready to go to create the perfect firewood length..
  • TIMESAVER: Tired of measuring each firewood marking by hand? Look no further than the Mingo Marker to create more efficient measuring process that reduces wasted cutting time and allows for more efficient loading and stacking. No more oversized cut firewood logs. This firewood cutting tool is the perfect piece of logging equipment to create a consistent and perfect measure..
Check Stock

CDBP Carbide Grooving Inserts MGMN400-M for MGEHR/L and MGIVR/L Grooving Cut-Off Tool Holder, Installed with KOLORY, CVD Coating Metal Cutting, 10pcs.

  • Size, MGMN400-M, Width(B): 4mm, Radius(R): 0.4mm, Longth(L): 21mm, Dimension(D): 1.2mm, Thickness(S): 4.8mm..
  • CVD coated yellow color grade, universal grade, suitable for steel and cast iron continuous cutting and interrupted cutting finishing to roughing. Grade with a wide range of applications. Stainless steel continuous cutting and interrupted cutting..
  • Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing..
  • Long processing life, competitive price, high cost performance, with better working, suitable for stailess steel, carbon steel and heat-resistant steel processing. A high the thermal shock resistance, suitable for light interrupted cuts..
  • CDBP multifunctional tools can be used in different applications, such as parting, grooving, turning, end face and profiling machining. Unique installation and chip-breaker can ensure excellent performance and production efficiency..
Check Stock

CDBP GTN-2 (SP200) CNC Grooving Carbide Inserts Steel Fit for SPB226/232 Lathe Grooving Cutting Tools, CVD Yellow Coating, 10pcs

  • Size, SP200,Width(B): 2.18mm, Radius(R): 0.2mm, Longth(L): 8.9mm, fit for Korloy grooving holder..
  • CVD coated yellow color grade, universal grade, suitable for steel and cast iron continuous cutting and interrupted cutting.
  • Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing..
  • Long processing life, competitive price, high cost performance, with better working, suitable for stailess steel, carbon steel and heat-resistant steel processing. A high the thermal shock resistance, suitable for light interrupted cuts..
  • CDBP multifunctional tools can be used in different applications, such as parting, grooving, turning, end face and profiling machining. Unique installation and chip-breaker can ensure excellent performance and production efficiency..
Check Stock

CDBP Carbide Grooving Inserts MGMN400-M for MGEHR/L and MGIVR/L Grooving Cut-Off Tool Holder, Installed with KOLORY, PVD Coating Metal Cutting, 10pcs

  • Size, MGMN400-M, Width(B): 4mm, Radius(R): 0.4mm, Longth(L): 21mm, Dimension(D): 3.3mm, Thickness(S): 4.8mm.
  • General material for parting and grooving processing, a nanocomposite coating of a AITiSi base, high temperature stability, good hardness. Small friction coefficient, reduce the adhesion between workpiece and insert cutting edge..
  • Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing..
  • Long processing life, competitive price, high cost performance, with better working, suitable for stailess steel, carbon steel and heat-resistant steel processing. range, A high the thermal shock resistance, suitable for light interrupted cuts..
  • CDBP multifunctional tools can be used in different applications, such as parting, grooving, turning, end face and profiling machining. Unique installation and chip-breaker can ensure excellent performance and production efficiency..
Check Stock

SINGER 00310 Tape Measure and Marking Pencil Combo

  • Measure & Mark Sewing kit contains two fabric marking pencils and a 120-inch tape measure.
  • Know where to cut and where to sew with a tape measure and pencils for marking seam allowances, cut lines and more.
  • Fabric marking pencils are water soluble.
  • Tape measure is black print on a pink background for easy visibility and shows inches and centimeters.
Check Stock

NiTi Reamer (Size 45-80# Length 25mm) 6 pieces

  • Material: Made of high-speed steel, with high hardness, sturdiness and durability, compact structure, and prolonged service life..
  • Good cutting ability: It has a sharp tip, strong cutting ability, high precision and long service life..
  • Excellent performance: The milling cutter has a sharp cutting edge, good cutting ability, and high precision, making the work easy and flexible..
  • Applicable to: It is widely applicable to steel, plastic, wood, copper, aluminum and other metal materials..
  • Wide range of uses: Milling reamers are widely used for boring processing, installed in drilling machines and milling machines, and suitable for reaming mold processing and manual processing..
Check Stock

YOUNGL Woodworking Scribe TS 3 Center Finder T Type Ruler Gauge Crossed-Out Tool Aluminum Alloy Measuring for Carpenters Portable Durable Manual t Marking Hole Scribing(TS-8Red)

  • 【Precise Marking T Rule】 Precise marking t-rule helps you draws perfect horizontal lines while sliding the rule along the edge of your work, Accurate calibration and convenient operation.
  • 【Convenient to Use】T Type Shape: T type design, easy to operate and portable to use. The marking ruler is precise, versatile, and easy-to-use. Find the hole corresponding to the scale, insert the pen into the hole, and draw the desired line.
  • 【Function】follows the edge of your work piece to mark perfectly placed horizontal or vertical lines, micro-fine marking holes and slots place your mark exactly on target, makes the woodworking ruler a perfect tool for you..
  • 【Material & Anodic Oxidation】Made of aluminum alloy 6067 material, is wear-resistant, rust-proof, durable and hard to break. Surface anodic oxidation CNC tool processing.
  • 【Compact Size】the ruler size is 107x88x58x20 mm,mini line ruler easy to carry and easy to use. Suitable for home DIY, woodworking measuring tool, etc...
Check Stock

Innovative White Permanent Vinyl for Cricut No Need Transfer Film, White HTV Vinyl Roll, White Vinyl, Oracle Vinyl 651 Permanent Vinyl, White Vynil, Bulk Vinyl Rolls, Adhesive Vinyl Roll 12\x30ft

  • 【INNOVATIVE VINYL NO NEED TRANSFER】This is innovative white vinyl which no need additional transfer paper, save one processing time and no need buy extra transfer paper, this is unique patent permanent vinyl..
  • 【INDUSTRY VINYL LEVEL QUALITY】No bubbles and wrinkling while using our permanent adhesive vinyl. Will not fade yellow. Our white adhesive vinyl is better than other white permanent vinyl because the built-in transfer tape makes the adhesive vinyl lay flat and firm..
  • 【DURABLE & LAST LONG】This permanent vinyl roll is pretty sticky, the adhesive vinyl will attached on any surface tightly. The white htv vinyl roll for cricut endure washing and raining both indoor and outdoor use. Thin and sturdy, durable and lasting long..
  • 【COMPATIBLE WITH MOST CUTTING MACHINES】Use same vinyl setting. Suitable for most vinyl cutting machines like the Cricut, Silhouette Cameo, Graphtec, Pazzles etc..
  • 【WIDELY USE】Ideal for indoor and outdoor, include scrapbooking, coffee cups, lettering, marking, signs, striping, decals, mugs, laptop covers, labels, home decor, window decor, tumblers, and more..
Check Stock

Chainmail Gloves for Cutting,Work Gloves Men Cut Resistant Gloves Food Grade Stainless Steel Mesh Metal Knife Gloves for Butcher(S)

  • Cut Resistant Glove Level 5: The cut gloves can meet the cut level bring stronger cut protection cut resistant gloves.It can endure the sharp edged blades like high speed chainsaw blade, knife, electric scissors etc..
  • Incredibly durable: Stainless steel rings connect together tightly, so that your chainmail glove will not stick out the wires or shade metal like others..
  • Multi-uses: Cut proof gloves are widely used in butchers, slaughterhouse, fish and shellfish processing, Poultry processing, ood/glass/plastic/leather processing etc..
  • Safe adjustable wrist clasp fits like your second skin and bring a comfortable feeling.Excellent wet and dry grip also makes it easier to hold onto slippery food-Fish, Oyster, Meat etc..
  • The simply way is rinse the cut resistant glove by soap water and hang for dry. Washing and disinfecting machines are also can be used..
Check Stock