Categories

Best Masonry Anchor

Hurricane Hardware Stainless Steel Phillips Combo Drive Stainless Steel Sidewalk Bolt Kit with Masonry Anchors & Set Tool - 49 Pieces

  • 1/4"-20 x 1-1/2" Phillips Slotted Combo Drive Sidewalk Bolts 18-8 Stainless Steel - 24 pieces.
  • 1/4"-20 Machine Screw Masonry Anchors - 24 Pieces.
  • Includes Setting Tool for Proper Machine Screw Anchor Installation.
  • Commonly used for storm windows and shutters to anchor into brick or masonry wall.
  • Fixtures can be removed or replaced without sacrificing holding power.
Check Stock

Shorpioen 100-Pack 1/4 x 1-3/4 Concrete Screw Hex Flanged White No Drill Bit BC-1428CNHFW

  • Building Code Approved. The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Blue ceramic coating exceeds 500/hrs salt spray resistance.
  • An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber. Hole should be of a depth equal to the required embedment plus 1/2”.
  • The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber. Check the Item Description to see if a drill is included as well..
Check Stock

50 Pcs 3/8 x 3 Zinc Plated Concrete Anchors Masonry Screws Heavy Duty Carbon Steel Concrete Anchors and Screws Kit Hex Head Large Diameter Concrete Anchor Bolts for Brick Blocks Cement

  • Adequate Quantity: there are 50 pieces of concrete anchors, suitable for large volume work, meeting your daily needs, and can also be shared with your family and friends.
  • Pocket Size: each of concrete screws and anchors is about 3/8" x 3", and weighs only 1.3 ounce/ 37 g, fine workmanship, and easy to carry around, providing you with much convenience.
  • Quality and Sturdy Material: hex concrete anchors are made of carbon steel, with galvanized surface to resist rust, and feature higher hardness, hard and not easy to deform, especially practical for dry environment.
  • Novel Design: featuring low torque threads, masonry screws have deep and clear threads, which can make concrete penetration easily, and also simple to install.
  • The anchor has a finished hex washer head with anti rotation serrations to keep the anchor away from backing out.
  • Wide Range of Applications: hex head concrete screw anchor is mainly designed for concrete, masonry, brick or block.
  • Note that using a standard drill bit for installation, the drill bit size is the same as the anchor diameter.
Check Stock

M10 x 80mm External Hex Expansion Bolts Screws, Hex Head Sleeve Anchor, 304 Stainless Steel, 4Pcs

  • M10 x 80mm Expansion Bolts, Thread Diameter: 10mm/ 0.4'', Expansion Tube Diameter: 12mm/ 0.47'', Total Length: 80mm/ 3.14''..
  • Made of 304 stainless steel, durable and rust resistant..
  • Concrete and masonry anchors, easy to install..
  • Used for heavy duty fixing of concrete masonry and solid masonry, ceiling and expansion sleeve anchor bolts..
  • Package Included: 4Pcs M10 x 80 expansion bolts..
Check Stock

CONFAST 3/8\ Lag Shield Anchor Long (12 per Box)

  • Expansion shield anchor provides a secure hold in most materials including solid masonry and uncracked concrete, even in applications where the anchor will be exposed to side pressure or vibration.
  • Anchor is made of rust-resistant zamac alloy and consists of cone on each side that expands the surrounding sleeve when a threaded machine bolt is inserted, gripping the mounting material and holding the anchor in place.
  • Meets Fed. Spec. GSA FFS-325 Group II Type 2 Class 2 Style 2 specifications.
  • Ultimate tensile strength is 1,190 lb. in 2,000-psi concrete.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

Dewalt DT6952-QZ Masonry Drill bit-Set (5 Piece)

  • Typically used for drilling anchor, plastic plug, fixing or pipework clearance holes.
  • Rotary/percussion masonry drill bit 130° douglas form Carbide tip.
  • Suitable for masonry, brick/blockwork, stone.
Check Stock

1/4 Tapcon Style Concrete Screws Slotted Hex Washer Head Concrete Screws to Anchor Masonry Block & Brick 1/4 x 1-3/4 Qty 1000

  • Slotted Hex Washer Head Masonry Screws - 1/4 inch Diameter.
  • Commonly used to anchor fixtures to brick, block or concrete.
  • Blue Climaseal Coating for Corrosion Resistance & Durability.
  • Cuts its own threads into concrete and other masonry materials.
  • Does not include masonry bit for pilot hole.
Check Stock

3/16 Tapcon Style Concrete Screws Slotted Hex Washer Head Concrete Screws to Anchor Masonry Block & Brick 3/16 x 1-1/4 Qty 1000

  • Slotted Hex Washer Head Masonry Screws - 3/16 inch Diameter.
  • Commonly used to anchor fixtures to brick, block or concrete.
  • Blue Climaseal Coating for Corrosion Resistance & Durability.
  • Cuts its own threads into concrete and other masonry materials.
  • Does not include masonry bit for pilot hole.
Check Stock

Klein Tools 53729 Drywall Anchor Kit for Use in Drywall or Masonry, 100 Anchors

  • Kit contains: 100 #2 Phillips, #10 x 1-Inch Screws, and 100 conical anchors.
  • 1/4-Inch masonry drill bit also included.
  • Light-weight anchor holds screw securely in place.
Check Stock

5/16\-18 Double Expansion Shields (Pack of 12)

  • Zamac Zinc Alloy Concrete Anchors for Masonry Screws or Bolts.
  • Four Part design: a two-piece tubular shield, a hollow, wedge-shaped cone and a wedge-shaped nut-- brought together into a single anchor unit.
  • Used in soft masonry with machine screws or machine bolts.
  • Can also be used in harder materials, including stone, brick, concrete or block.
Check Stock

CONFAST 5/8\ Lag Shield Anchor Long (25 per Box)

  • READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used.
  • INTERNAL THREADS-Bolt can be removed easily.
  • BOLT EXPANDS ANCHOR-No need for setting tools.
  • CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications.
Check Stock

Portrait of a Garden

  • Everything you need, just supply own poles, electric drill, wire cutters and rivet gun. If you are fixing to masonry/brick walls a masonry drill bit and nylon plugs will be required.
  • Adorn fences & walls with climbing greenery.
  • Heavy duty wire 316 stainless steel - high tension / heavy loading. Unique tensioning system allows re-tensioning if wire becomes slack.
  • Number of Components: Anchors in capsules: 4 Anchor Platforms: 4 Hex head screws: (25mm) 8 Radial Wire Guides: 10 Hex Screws (40mm): 20 Tension Cap: 2 End Cap: 2 Wire in m (spooled) : 30m of 2mm '316' wire.
Check Stock

Yasorn 5-pack Stainless Steel External Hex Expansion Bolt M8x60mm

  • Material : High quality 304 stainless steel.
  • Sturdy and firm , resistant to rust and corrosion.
  • Concrete anchor and masonry anchor , easy to be mounted.
  • A installation manual has been uploaded below the "Technical Specification" , please read it..
Check Stock