Best Mast R Lift Excel Ii - TopShopReview.com

JessEm ROUT-R-LIFT II ROUTER TABLE PACKAGE for PORTER CABLE/DEWALT/BOSCH

JessEm included all you need for a top of the line system which includes the Rout-R-Lift II all new router lift solution..
Includes: Rout-R-Lift II (comes with 3 insert rings, 1-3/8'', 2'', 2-1/2''), Mast-R-Fence III (04400), Mast-R-Top (03006), Rout-R-Table Stand (05005),....
Compatible with Porter Cable 690/890, Bosch 1617/1618, DeWalt 610/618, Craftsman 17543/17540/28190..

COMPATIBILITY: The Mite-R-Slide II will fit the JessEm’s Mast-R-Fence II Router Fence and TA Fence.
HOW DOES IT WORK: It slides onto the T-slot on the top of the fence which makes set up of the Mite-R-Slide II quick and easy. When you are done with....
PRECISION MADE GUAGE: The Mite-R-Slide II Gauge is rotatable 45 degrees to the left. Depending on your project, set the desired angle on the slider....
FOUR ACETAL ROLLERS: Four Acetal rollers, each with its own bearings, and each turning on a specially machined stainless steel roller pivot all....
GUARD ASSEMBLY: In addition, the Mite-R-Slide II has been equipped with a clear guard mounted to a swing assembly that enables the guard to move with....

Bundle Includes: JessEm Rout-R-Lift II Router Lift for Porter Cable, Dewalt and Bosch Routers with 3.5" Diameter Motors and JessEm 10-Piece Insert Ring Set with Caddy for Router Plates and Lift Systems.
Compatibility: This model is designed for use with Porter Cable 690/890, DW 610/616/618, Bosch 1617/1618, or any other routers with 3.5" diameter motors.
Double-Sealed Ball Bearing: Thanks to the a double sealed bearing to the spindle, the Rout-R-Lift II can smoothly raise and lower your motor with ease.
Lift Shafts: The shafts are attached to the top plate and fasten in place with more than one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations.
Sturdy Construction: All the machined components on the Rout-R-Lift II are CNC machined for durability.

BUNDLE INCLUDES: JessEm Rout-R-Lift II Router Lift with Microjig GRR-Ripper 3D Pushblock.
COMPATIBILITY: This model is designed for use with Porter Cable 690/890, DW 610/616/618, Bosch 1617/1618, or any other routers with 3.5" diameter motors.
DOUBLE-SEALED BALL BEARING: Thanks to the a double sealed bearing to the spindle, the Rout-R-Lift II can smoothly raise and lower your motor with ease.
LIFT SHAFTS: The shafts are attached to the top plate and fasten in place with more than one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations.
STURDY CONSTRUCTION: All the machined components on the Rout-R-Lift II are CNC machined for durability.

Part Name: Hydraulic Lift Function Gear Pump.
Compatible with Genie Vertical Mast Lift Models GR-08, GR-12, GR-15, GR-20, GRC-12, WS-12R, QS-12W, QS-15R, QS-15W, QS-20R and QS-20W.
Compatible with Genie Scissor Lift Models GS-1530, GS-1532, GS-1930, GS-1932, GS-2032, GS-2046, GS-2632, GS-2646, GS-2646 AV, GS-2646 AV35, GS-3232, GS-3246.
Compatible with Genie Towed Articulating Boom Lift Models TMZ-50/30, TZ-50/30.

Part Name:20 Volt Solenoid Lowering Valve.
Application:Control Valve used for Vertical Mast Lift Models GR-12, GR-15, GR-20, GRC-12, QS-12R, QS-12W, QS-15R, QS-15W, QS-20R, AND QS-20W. Scissor Lift Models GS-1530, GS-1532, GS-1930, GS-1932, GS-2032, GS-2046, GS-2632, GS-2646, GS-3246..
Description:VALVE, 20 VOLT, NC SOLENOID, MANUAL.
HNARL provided 100% satisfaction. If there are any problems with the purchase, please feel free to contact us, we will help to fix the problem within 24 hours..

Compatible with Genie Vertical Mast Lift GR-08 GR-12 GR-15 GR-20 GRC-12 QS-12R Electric Scissor Lift GS-1530 GS-1532 GS-1930 GS-1932 GS-2032 Trailered Boom Lift Models TZ-34/20 TZ-50/30.
Note: Installation Manual Is NOT Included. Professional Installation Is Highly Recommended..
Note: Please check whether your old part number is the same as the part number in the list to reduce the error rate. Thank you very much..

DESIGNED FOR ACCURATE CUTS: Mite-R-Excel II Miter Gauge features nine miter detents and a spring-loaded indexing pin to ensure accurate cuts at the most common angles.
ADJUSTABLE FLIP STOP: Features adjustable flip stop accommodates up to 3/4-inch thick sacrificial fence.
EXTENSION: Fence extends from 20 to 36 inches to accommodate larger work-pieces when cutting.
COMPATIBILITY: Fits standard 3/4 x 3/8-inch miter slot and features laser-engraved angle measurements for accuracy.
MATERIAL: CNC-machined anodized aluminum components and Swiss-turned stainless steel parts. The guide bar made from Sheffield steel.

Max lift height 118" | fork lowered height : 3.5" | Height, mast lowered 84.4 inch.
Lift by electric power, moved by manual | 6 hours working time , 6 hours charging time..

Max lift height 118" | fork lowered height : 3.5" | Height, mast lowered 84.4 inch.
Lift by electric power, moved by manual | 6 hours working time , 6 hours charging time..

Please note: This stacker with fixed legs only suitable for block pallet. Not applicable to Stringer Pallets..
Integrated adjustable forks. | Easy operating foot brake..
Max lift height 118" | fork lowered height : 3.5" | mast lowered 82.3 inch.
Lift by electric power, moved by manual | 6 hours working time , 6 hours charging time..
Compact design for EU type pallet, perfect stacking and pallet positioning as well as stocking and refilling shelves. | Equipment with explosion-proof valve..

The JessEm 02314 Rout-R-Lift II router lift is compatible with Rigid brand router motor 29302..
Features a 9-1/4" x 11-3/4" Phenolic insert plate..
Insert opening accommodates bits up to 3-1/2" in diameter and receives JessEm's reducing ring inserts..
Comes with all mounting and leveling hardware, start pin, hand crank, 3 insert rings (2", 2-1/2", and 1-3/8"), and 1 insert wrench..
Additional insert rings available separately..