Categories

Best Matrix Fractional Co2 Laser

Lezyne CO2 Repair Kit for Road, Gravel, Mountain Bikes, Threaded 16g Cartridges, CO2 Inflator, Flat Kit

  • QUICK REPAIR KIT – An easy to pack poly bag with all your quick repair needs into your jersey pocket or saddle bag.
  • TIRE LEVERS – Twin composite matrix reinforced tire levers with spoke tabs to help you remove and re-install your tires after repair.
  • TUBE PATCHES – Smart kit with 6 patches and stainless steel scuffer to get your tubes back to airtight status.
  • TWIN SPEED DRIVE – Slip fit CO2 inflator head fits over both Presta and Schrader, and includes a neoprene cover to protect your hand from the cold CO2 cannister.
  • CO2 CARTRIDGES - Twin 16g threaded cartridges included to make sure you’re good to roll out as soon as you unbox this.
Check Stock

Grow Crew Hydroponic CO2 Enrichment Kit | Includes 20 lb Aluminum CO2 Tank Carbon Accelerator C02 Regulator and Active Air Rain System to Shower Your Plants with CO2

  • BUNDLE INCLUDES - 20 lb. Aluminum CO2 Tank (Empty), Carbon Accelerator CO2 Regulator w/ Flow Meter, Active Air CO2 Rain System - 20 ft, 6 eye-screws,1....
  • PERFECT CO2 ENRICHMENT KIT - The C02 Rain System showers your plants with CO2! Just affix the eye screws in the ceiling, slide the black laser drilled....
  • CARBON ACCELERATOR REGULATOR W/ FLOW METER - The CO2 Release Kit provides you with the tools you need for proper CO2 enrichment. The regulator....
  • ACTIVE AIR RAIN SYSTEM - Active Air CO2 Rain System will make it rain CO2 onto your garden to help promote vigorous growth and high yields. This is....
  • 20 LB. ALUMINUM CO2 TANK - The 20 pound aluminum tank is brand new, and perfect for use with our CO2 regulator. Aluminum tanks are about 1/2 the....
Check Stock

Cloudray 10600nm 10.6um Laser Safety Goggles OD4+ CE Protective Goggles For CO2 Laser Cutting Engraving Machine

  • Uniquely ventilated material on the inside and inside of the frame for a more comfortable fit, soft ear rests increase wearer comfort.
  • Lightweight black nylon frame, impact resistant, lightweight and durable.
  • With flank and eyebrow protection, it can resist the damage of the laser to the eyes.
  • Be good for work with CO2 laser marking machine, cutting machine, CO2 laser equipment.
Check Stock

Lasers And Dots

  • DESKTOP CO2 LASER: Whether professional engraver or inspired DIYer, this K40 40W home laser engraver from OMTech will allow you to bring your ideas to life with greater speed and precision than ever before, cutting up to 1/8" through plywood or acrylic.
  • the advanced features of its intuitive digital control panel and bundled Windows-compatible editions of LaserDRW and WinsealXP will let you create and recreate even your most intricate designs perfectly.
  • VERSATILE 8x12 BED: The spacious 8x12 inch workbed provides 0.7 square feet of room to fit regular projects and gives you extra 2" height for thicker materials once the vented level board is removed.
  • the stabilizer clamp fixes irregularly shaped items securely in place for accurate engravings.
  • SAFE & EASY OPERATION: A digital laser power supply provides sure and easily monitored operation for your DC tube's expected 2000 hour life.
  • the wide viewing cover includes tinted eye protection.
  • a built-in exhaust fan quickly blows away smoke and dust for better ventilation to protect your laser lenses and reflective mirrors.
  • and a large E-stop is ready in case of emergencies.
  • FAST & FULLY ADJUSTABLE: This CO2 laser system marks wood, paper, plastics, leather, fabric, stone, and a wide range of other nonmetallic m....
Check Stock

OMTech 60W CO2 Laser Engraver and Cutter 60W 20 x28 Laser Engraving and Cutting Machine with Autofocus Air Assist 2 Way Pass RDWorks LightBurn Software for Windows Mac OS Linux

  • COMMERCIAL CO2 LASER: Whether professional engraver or inspired DIYer, this 60W laser engraver and cutter from OMTech will allow you to bring your....
  • AUTOMATED 20x28 BED: The spacious 20x28 inch workbed provides 3.8 square feet of room to fit almost any project and two-way 32.8"x3.9" pass-through....
  • FAST & FULLY ADJUSTABLE: This CO2 laser system marks wood, paper, plastics, leather, fabric, stone, and a wide range of other nonmetallic materials at....
  • INCLUDES LIGHTBURN: This laser cutting and engraving machine ships with LightBurn for Windows, Mac OS, or Linux to get you started right away. It is....
  • SUPERIOR SUPPORT & SERVICE: From garage artists to backyard businesses to professional workshops, the OMTech community continues to grow thanks to our....
Check Stock

OMTech Laser Marking Spray, Metal Laser Marking Fluid for CO2 Laser Engravers, 13oz Aerosol High Contrast Black Spray for Laser Engraving Metal, Laser Ink Agent for Aluminum Stainless Steel Brass More

  • : This CO2 laser engraver accessory kit by OMTech includes 20 durable aluminum blades to let you make your own laser bed that provides lasting, firm, and secure support for your engravings.
  • : Easy to set up and take down, this 14.4 inch knife laser working table works perfectly with OMTech's CO2 laser engraving machines with a working area of 12x20 inches (300x500 mm).
  • : Our knife workbed blades can be set densely or sparsely as needed to ensure debris of various sizes easily passes through, fitting almost any projects while keeping your worksite clean.
  • - : This set of 20 laser bed blades offers unraveled toughness and corrosion resistance under even punishing use thanks to the high-strength solid aluminum construction.
  • : Each blade is specially shaped into a prism to stay firmly secured to your machine while using its sharp edge to minimize the contact area with your materials for ideal engraving results.
Check Stock

Monport 40w Lightburn with GCode License Key for Lightburn Software 40W Laser Engraver (8" X 12") CO2 Laser Engraver with Red Dot Guidance, 3 LED Monitor Display and Water Cooling System

  • : This CO2 laser engraver accessory kit by OMTech includes 20 durable aluminum blades to let you make your own laser bed that provides lasting, firm, and secure support for your engravings.
  • : Easy to set up and take down, this 14.4 inch knife laser working table works perfectly with OMTech's CO2 laser engraving machines with a working area of 12x20 inches (300x500 mm).
  • : Our knife workbed blades can be set densely or sparsely as needed to ensure debris of various sizes easily passes through, fitting almost any projects while keeping your worksite clean.
  • - : This set of 20 laser bed blades offers unraveled toughness and corrosion resistance under even punishing use thanks to the high-strength solid aluminum construction.
  • : Each blade is specially shaped into a prism to stay firmly secured to your machine while using its sharp edge to minimize the contact area with your materials for ideal engraving results.
Check Stock

Escort Passport 8500 X50 Radar Detector Extended Long Range, AutoMute, AutoSensitivity, Audible Alerts, Adjustable LED Display, Signal Strength Meter, Grey, 1.25

  • Three-Levels of Brightness Control:Choose between Dim, Medium, or Max brightness levels, or fully dark for discreet night driving.
  • Three High-Resolution Meter Modes:PASSPORT provides three types of meter displays: Standard Bar Graph, exclusive ExpertMeter, and our unique SpecDisplay.
  • Ultra-Bright Matrix Display:PASSPORT's matrix display uses 280 individual ultra-bright LEDs to provide crystal-clear information for alerts, signal strength and text for programming.
  • Mute and AutoMute:Patented Mute and AutoMute feature automatically reduces the volume level during an alert to eliminate annoyance from long radar encounters.
  • New Advanced EZ-Programming:PASSPORT comes ready to use out of the box. However, you can also instantly customize it for your unique driving preferences, including Power-On indication, Meter type, AutoMute, Brightness level, including full Dark Mode, Audio Tones, and selectable radar and laser bandsDescriptionEscort Red Radar Detector Map 309.95.
Check Stock

Grow Crew Hydroponic CO2 Enrichment Kit | Includes 20 lb Aluminum CO2 Tank, Carbon Accelerator C02 Regulator, Atlas 7 CO2 PPM Monitor and Active Air Rain System to Shower Your Plants with CO2

  • ...k (Empty), Carbon Accelerator CO2 Regulator w/ Flow Meter, Atlas 7 CO2 Monitor, Active Air CO2 Rain System - 20 ft, 6 eye-screws,1 T-Fitting, and a "Legalize Tomatoes" Sticker.
  • ✓ PERFECT CO2 ENRICHMENT KIT - The C02 Rain System showers your plants with CO2! Just affix the eye screws in the ceiling, slide the black laser drilled tubing through the eye screws, attach the plastic tubing from your CO2 Regulator and you've got CO2 raining down on your plants!.
  • ✓ CARBON ACCELERATOR REGULATOR W/ FLOW METER - The CO2 Release Kit provides you with the tools you need for proper CO2 enrichment. The regulator assembly features an industrial-grade 120-volt solenoid valve with 6 ft. power cord, a precise flow-gauge, and easy-to-read pressure gauge. The kit also includes 10 ft of tubing for dispersal, and connects directly to 20 lb. or 50 lb. tanks..
  • ✓ TITAN CONTROLS ATLAS 7 CO2 PPM MONITOR - Select CO2 PPM levels at 1000 PPM, 1250 PPM or 1500 PPM. Integrated photocell. Built-in calibration feature. Single button control. Enclosure resists dust, rust, and moisture. 5 Amps maximum/120 Volts/60 Hz..
  • ✓ 20 LB. ALUMINUM CO2 TANK - The 20 pound aluminum tank is brand new, and perfect for use with our CO2 regulator. Aluminum tanks are about 1/2 the weight of standard ....
Check Stock

OMTech Knife Laser Bed, Aluminum Laser Working Table for 12"x20" CO2 Laser Engravers Markers, Set of 20 Knife Blades for Laser Engraving Marking Etching Machines, Laser Work Platform DIY Accessory Kit

  • : This CO2 laser engraver accessory kit by OMTech includes 20 durable aluminum blades to let you make your own laser bed that provides lasting, firm, and secure support for your engravings.
  • : Easy to set up and take down, this 14.4 inch knife laser working table works perfectly with OMTech's CO2 laser engraving machines with a working area of 12x20 inches (300x500 mm).
  • : Our knife workbed blades can be set densely or sparsely as needed to ensure debris of various sizes easily passes through, fitting almost any projects while keeping your worksite clean.
  • - : This set of 20 laser bed blades offers unraveled toughness and corrosion resistance under even punishing use thanks to the high-strength solid aluminum construction.
  • : Each blade is specially shaped into a prism to stay firmly secured to your machine while using its sharp edge to minimize the contact area with your materials for ideal engraving results.
Check Stock

OMTech Knife Laser Bed, Aluminum Laser Working Table for 24"x35" CO2 Laser Engravers Cutters, Set of 30 Knife Blades for Laser Engraving Marking Etching Machines, Laser Work Platform DIY Accessory Kit

  • : This CO2 laser engraver accessory kit by OMTech includes 30 durable aluminum blades to let you make your own laser bed that provides lasting, firm, and secure support for your engravings.
  • : Easy to set up and take down, this 27.4 inch knife laser working table works perfectly with OMTech's CO2 laser engraving machines with a working area of 24x35 inches (600x900 mm).
  • : Our knife workbed blades can be set densely or sparsely as needed to ensure debris of various sizes easily passes through, fitting almost any projects while keeping your worksite clean.
  • - : This set of 30 laser bed blades offers unraveled toughness and corrosion resistance under even punishing use thanks to the high-strength solid aluminum construction.
  • : Each blade is specially shaped into a prism to stay firmly secured to your machine while using its sharp edge to minimize the contact area with your materials for ideal engraving results.
Check Stock

ATOMSTACK Honeycomb Working Table F1 for Laser Engraving and Cutting Machine, Honeycomb Working Panel for Fast Heat Dissipation and Desktop-Protecting, Compatible with All Laser Cutter,380x284x22mm

  • Double Protection Desktop: ATOMSTACK honeycomb board adopts scientific and reasonable honeycomb height size design to prevent laser burning workbench or desktop. At the same time, it is equipped with anti-cutting metal protective backing board, which can further protect the desktop from laser damage. It is very suitable for various styles. CO2 or diode laser engraving machine..
  • Anti-slip metal clamps for fixing:This laser cutting honeycomb table is all made of metal, high-precision CNC processing, and it has fixture design, suitable for fixing various sizes of carvings, preventing the objects from shifting to the exact position during the carving process, and preventing the carvings from deforming..
  • Fast heat dissipation:The size of the honeycomb laser bed is scientifically calculated, which can make the carving object get fast heat dissipation during the carving process, and the cutting edge is more refined, while avoiding the burning of the carving object due to excessive temperature..
  • Cutting Through Observable Design: When the laser cuts through wood or acrylic, the metal plate at the bottom of the honeycomb table will emit a bright light, which means that the cutting has penetrated. Solve the problem that ordinary engraving machine is difficult to ....
Check Stock

OMTech 50W CO2 Laser Engraver and Rotary Axis 50W Laser Cutter and Engraver Machine 12x20 Inch Laser Engraving Machine with 2 Way Pass Air Assist RDWorks Laser Cutting Machine for Wood Acrylic More

  • COMMERCIAL CO2 LASER: Whether professional engraver or inspired DIYer, this 50W laser engraver and cutter from OMTech will allow you to bring your....
  • 12x20 BED & ROTARY AXIS: The spacious 12x20 inch workbed provides 1.6 square feet of room to fit almost any project and two-way 25"x1.4" pass-through....
  • FAST & QUICKLY ADJUSTABLE: This CO2 laser system marks wood, paper, plastics, leather, fabric, stone, and a wide range of other nonmetallic materials....
  • SAFE & EASY OPERATION: A digital laser power supply provides sure and easily monitored operation for your DC tube's expected 2000 hour life.
  • SUPERIOR SUPPORT & SERVICE: From garage artists to backyard businesses to professional workshops, the OMTech community continues to grow thanks to our....
Check Stock