Thermalright TL-B8W CPU Fan Computer Case Fan Quiet 4pin PWM PC Fan, 80mm Silent Cooler Fan, 2200RPM Speed, CPU Cooling Fan(White)

  • 【High Performance Cooling Fan】 Automatic speed control of the motherboard through the 4PIN PWM fan cable interface, which can determine the speed according to the temperature of the motherboard, with a maximum speed of 2200RPM..
  • 【Vibration damping and low noise】 Four vibration damping pads around the fan reduce the vibration friction caused by PC fan rotation, perfectly reducing noise and allowing low noise operation..
  • 【Dimensions of Silent Fan】 Size: 80*80*25mm, Speed: 2200RPM±10%, Noise ≤24dBA Connector: 4pin pwm, wind pressure: 2.7mm H2O,Air Flow: 34CFM (MAX), Higher air flow for improved cooling performance..
  • 【Quality Bearings】 Carefully developed, solving the problem of shaking fan blades in lifting mode with durability, quality S-FDB V2 bearings keep fan noise to a minimum while providing maximum cooling performance when needed and extending the life of the case fan..
  • [Perfect match] The ultra-thin fan can not only be used as a case fan, but also suitable with downward coolers to cooling down CPU jointly aim at maximized heat dissipation performance.
  • Ideal for cases, radiators and CPU coolers. Easy to install, can be combined with instructions or installation tutorials..
Check Stock

Thermalright TL-B12W 120mm Fan, S-FDB Bearing, PWM Control, 2150RPM, Static-Pressure Performance Fan

  • [cpu cooler Silent fan size] size: 120*120*25.6mm, Speed: 2150RPM±10%, noise≤ 28.1dBA.
  • port: 4pin pwm, current: 0.16A, Wind pressure: 2.87mm H2O (MAX), air flow: 69CFM (MAX), Higher air flow can improve cooling performance..
  • [Vibration-absorbing and low noise] The four corners of the fan are equipped with four vibrations absorbing pads, which pwm can reduce the vibration and friction caused by the rotation of the fan, perfectly reduce the noise and allow low-noise performance..
  • [High-quality bearing] The well-designed superior S-FDB bearing can keep the noise of the fan at the lowest level, and provide the maximum cooling performance when needed, as well as extend the service life of case fan..
  • [High-performance pc cooling fan] Automatically control the fan speed through 4pin PWM connection port on motherboard, the maximum speed can reach 2150RPM.
  • [9 piece blades design] The newly designed 9 blades and white frame provides high airflow with low noise, improve ventilation efficiency, and provide the required air pressure. The cpu fan is an ideal choice of case, and CPU cooler..
Check Stock

LoveRPi Performance Pro Active Cooling Case White for Raspberry Pi 3 ODROID-C2

  • MAXIMUM PERFORMANCE: Raspberry Pi 3*/2/B+ and ODROID-C2/C1+**.
  • DUAL MODE ACTIVE COOLING: ABS Case comes with 4 Rubber Feet, 8 Screws, Active Cooling Fan 5V or 3.3V Operation.
  • ACCESS TO EVERYTHING: Camera Cable Slot, Display Cable Slot, GPIO Cable Slots! Beauty without compromising capability!.
  • USABLE WITH TALL HEATSINKS: Fits LoveRPi High Surface Area 10mm Heatsink Set, Keeps Raspberry Pi 3 at Maximum Performance and Cool (under 60C).
  • Raspberry Pi 3 MicroSD card slot does not have a spring. PLEASE REMEMBER TO REMOVE THE MICROSD CARD PRIOR TO INSTALLING OR REMOVING THE CASE!.
Check Stock

TEESSO iPad Cooler, 3.9 inch Diameter Magnetic Tablet Cooler, Phone Cooling 20W Power Driver, Temperature Display Radiator for iPhone iPad Portable Laptop Cooler for Outdoor and Travel

  • ... to switch the power and noise, such as 5V1A, 5V2 A and 9V2A,9v3a adapter).
  • 【Temperature Display】The phone cooling fan is featuring a live temperature display, the Cellphone Radiator with surface pro tablet cooling fan s built for enthusiasts. You’ll feel and see the performance boost..
  • 【RGB Lighting】The internal high-performance Phone Cooler fan and radiator for tabletis fast, but silent. Customize your look with various RGB colors and lighting effects..
Check Stock

Head Web Racquetball Glove [Right-Handed Throw] Large

  • Silicon web pattern on the palm for increased gripping power.
  • New palm material for increased feel and flexibility.
  • More silicon webbing in key areas for increased durability.
  • High performance COOLTECH Spandex for maximum circulation, cooling and comfortable fit.
  • COOLTECH Microfiber COOLMESH for maximum breathability and cooling..
  • Dive pads for added protection and durability.
Check Stock

Brembo 09.9547.33 Front Disc Brake Rotor

  • Enhanced Performance Venting - The use of Brembo Pillar Venting Technology or directional venting allows improved cooling and greater resistance to cracking.
  • High Carbon cast iron minimizes noise and vibration and provides maximum performance.
  • Aluminum Hub - Considerable weight reduction of the disc, with benefits in terms of performance and emission reduction.
  • Braking Surface-Hub Connection - Allows braking surface of the floating discs to expand without causing permanent deformation.
  • Alloy cast iron braking surface - The use of special alloy cast iron with a high carbon content guarantees the best performance, even in the most extreme braking conditions.
  • Grooves/Drilling - The use of grooves and holes on the braking surface creates the following advantages: Continuous revitalization of the friction material, Improved cooling, performance in wet conditions and resistance to fading.
Check Stock

Brembo 09.9313.33 Front Disc Brake Rotor

  • Enhanced Performance Venting - The use of Brembo Pillar Venting Technology or directional venting allows improved cooling and greater resistance to cracking.
  • High Carbon cast iron minimizes noise and vibration and provides maximum performance.
  • Aluminum Hub - Considerable weight reduction of the disc, with benefits in terms of performance and emission reduction.
  • Braking Surface-Hub Connection - Allows braking surface of the floating discs to expand without causing permanent deformation.
  • Alloy cast iron braking surface - The use of special alloy cast iron with a high carbon content guarantees the best performance, even in the most extreme braking conditions.
  • Grooves/Drilling - The use of grooves and holes on the braking surface creates the following advantages: Continuous revitalization of the friction material, Improved cooling, performance in wet conditions and resistance to fading.
Check Stock

Brembo 09.9764.23 Coated Rear Disc Brake Rotor

  • Enhanced Performance Venting - The use of Brembo Pillar Venting Technology or directional venting allows improved cooling and greater resistance to cracking.
  • High Carbon cast iron minimizes noise and vibration and provides maximum performance.
  • Aluminum Hub - Considerable weight reduction of the disc, with benefits in terms of performance and emission reduction.
  • Braking Surface-Hub Connection - Allows braking surface of the floating discs to expand without causing permanent deformation.
  • Alloy cast iron braking surface - The use of special alloy cast iron with a high carbon content guarantees the best performance, even in the most extreme braking conditions.
  • Grooves/Drilling - The use of grooves and holes on the braking surface creates the following advantages: Continuous revitalization of the friction material, Improved cooling, performance in wet conditions and resistance to fading.
Check Stock

Brembo 09.A190.13 Rear Disc Brake Rotor

  • Enhanced Performance Venting - The use of Brembo Pillar Venting Technology or directional venting allows improved cooling and greater resistance to cracking.
  • High Carbon cast iron minimizes noise and vibration and provides maximum performance.
  • Aluminum Hub - Considerable weight reduction of the disc, with benefits in terms of performance and emission reduction.
  • Braking Surface-Hub Connection - Allows braking surface of the floating discs to expand without causing permanent deformation.
  • Alloy cast iron braking surface - The use of special alloy cast iron with a high carbon content guarantees the best performance, even in the most extreme braking conditions.
  • Grooves/Drilling - The use of grooves and holes on the braking surface creates the following advantages: Continuous revitalization of the friction material, Improved cooling, performance in wet conditions and resistance to fading.
Check Stock

Brembo 09.B386.13 Front Disc Brake Rotor

  • Enhanced Performance Venting - The use of Brembo Pillar Venting Technology or directional venting allows improved cooling and greater resistance to cracking.
  • High Carbon cast iron minimizes noise and vibration and provides maximum performance.
  • Aluminum Hub - Considerable weight reduction of the disc, with benefits in terms of performance and emission reduction.
  • Braking Surface-Hub Connection - Allows braking surface of the floating discs to expand without causing permanent deformation.
  • Alloy cast iron braking surface - The use of special alloy cast iron with a high carbon content guarantees the best performance, even in the most extreme braking conditions.
  • Grooves/Drilling - The use of grooves and holes on the braking surface creates the following advantages: Continuous revitalization of the friction material, Improved cooling, performance in wet conditions and resistance to fading.
Check Stock

Coleman Fishing Camping Caravan 28QT Xtreme Wheeled 26L Cooler Coolbox

  • Up to three day’s cooling performance, perfect for long weekends away.
  • All-terrain wheels and telescopic handle making it easy to transport over longer distances.
  • High performance injected Polyurethane foam insulated body and lid.
  • Shaped sides and base ensure maximum cooling efficiency.
  • Increased internal storage capacity without effecting external dimensions.
Check Stock

Micro-ATX Case, MOROVOL 2pcs 120MM ARGB Fans Computer Case USB 3.0×2 Micro ATX Tower Computer Case Opening Tempered Glass Panel & Mesh Front Panel Airflow MATX Gaming PC Case (TW7, Pink)

  • ...ing magnetic buckle and metal pull ring is easy to install the hardware, and can be opened at any time, improving the ultimate thermal effect, which improves 84% of the cooling effect than the non-opening panel case..
  • 【Extraordinarily Cooling System】Both of the front panel and the top is mesh for optimal cooling performance, and the case is pre-installed 2pcs ARGB fans that provides strong airflow to the pc case for optimal cooling performance..
  • 【Excellent Lighting Effects 】This PC case Included a ARGB controller and 2pcs ARGB fans. With the ARGB controller, through connecting 5V 3PIN interface of motherboard to achieve fans sync color. Each addressable ARGB fan offers 16.8 million colors to create a stunning lighting effect. The high light-transmitting glass side panels showcase your computer's ARGB colors. (Note: 12V 4PIN motherboard is not suitable for motherboard control mode, and it is recommended to use button control only.).
  • 【Top I/O Panel】The micro pc case TW7 is designed with 2 x USB3.0 ports for faster transfer speed. With HD audio and microphone ports to enjoy lossless sound quality. Dedicated LED buttons can be used to control 19 lighting modes for ARGB fans..
  • 【Proper Interior Space】This Micro ATX mid tower case provides an ap....
Check Stock

MOROVOL Mesh Micro-ATX Tower Computer Case, 2PCS × ARGB Fans Pre-Installed and 2×USB 3.0 Ports, Magnetic Design Opening Tempered Glass Panel & Mesh Front Panel Mini-ITX Gaming PC Case, White

  • ...ing magnetic buckle and metal pull ring is easy to install the hardware, and can be opened at any time, improving the ultimate thermal effect, which improves 84% of the cooling effect than the non-opening panel case..
  • 【Extraordinarily Cooling System】Both of the front panel and the top is mesh for optimal cooling performance, and the case is pre-installed 2pcs ARGB fans that provides strong airflow to the pc case for optimal cooling performance..
  • 【Excellent Lighting Effects 】This PC case Included a ARGB controller and 2pcs ARGB fans. With the ARGB controller, through connecting 5V 3PIN interface of motherboard to achieve fans sync color. Each addressable ARGB fan offers 16.8 million colors to create a stunning lighting effect. The high light-transmitting glass side panels showcase your computer's ARGB colors. (Note: 12V 4PIN motherboard is not suitable for motherboard control mode, and it is recommended to use button control only.).
  • 【Top I/O Panel】The micro pc case TW7 is designed with 2 x USB3.0 ports for faster transfer speed. With HD audio and microphone ports to enjoy lossless sound quality. Dedicated LED buttons can be used to control 19 lighting modes for ARGB fans..
  • 【Proper Interior Space】This Micro ATX mid tower case provides an ap....
Check Stock