DNA MOTORING CBE-MM90 Stainless Steel Cat Back Exhaust System [Compatible with 90-97 Mazda Miata MX-5 1.6L/1.8L]

  • 【FITMENT】Compatible with 90-97 Mazda Miata MX-5 1.6L/1.8L.
  • 【Quality Construction】Made of High Quality 409 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Enhance Performence】Dyno proven to instantly increases 15 – 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Muffler & Diameter】2.5″ OD Inlet / 2.5″ OD Main Piping.
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

DNA MOTORING CBE-MM90-BT Stainless Steel Cat Back Exhaust System [Compatible with 90-97 Mazda Miata MX-5 1.6L/1.8L]

  • 【FITMENT】Compatible with 90-97 Mazda Miata MX-5 1.6L/1.8L.
  • 【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Muffler & Diameter】2.5" OD Inlet / 2.5" OD Main Piping.
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

MagnaFlow Cat-Back Performance Exhaust System Street Series Kit 15715 - Designed for the 1990-1997 Mazda Miata - 2.25in Main Piping, Single Straight Passenger Rear Exit, Polished 4in Exhaust Tip

  • MODERATE SOUND/STREET SERIES - Street Series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels. Fast-flowing mandrel bent pipes with larger or more straight-through mufflers reduce exhaust restriction and enable that MagnaFlow performance tone without garnering racecar levels of attention. Specifically designed for the 1990-1997 Mazda Miata.
  • CAT-BACK PERFORMANCE - Extensive testing and dyno-proven power make this exhaust truly developed for the driven. It is designed to replace the original exhaust components following the catalytic converter. These systems are 50-state legal and designed to optimize power based on the factory calibration.
  • BOLT-ON INSTALLATION - MagnaFlow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment. CNC precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation.
  • STAINLESS-STEEL CONSTRUCTION - Highly corrosion resistant, Stainless-Steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity. Built to be the exhaust that lasts the lifeti....
Check Stock

Totally Covers Compatible with 1990-2000 Mazda MX-5 Miata Seat Covers: Black and Red (22 Colors) Bucket

  • A set of black and red seat covers for a 1990 to 1998 Mazda Miata..
  • High quality cotton material with a three-layered construction for durability. Foam padding for comfort and protection to the vehicle's seats..
  • Machine washable on cold cycle and drip dry. Do not machine dry..
  • Compatible with: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998 Mazda MX-5 Miata..
  • 30-Day Money Back Guarantee: Will fit your Mazda MX-5 Miata seats or your money back..
Check Stock

TOTALLY COVERS Compatible with 2006-2015 Mazda MX-5 Miata Seat Covers: Black (22 Colors) Seat Belt Holder & Side Airbag Compatible Bucket

  • A set of black seat covers for a 2006 to 2012 Mazda Miata..
  • Seat belt holder and side airbag compatible..
  • High quality cotton material with a three-layered construction for durability. Foam padding for comfort and protection to the vehicle's seats. Machine washable on cold cycle and drip dry. Do not machine dry..
  • Compatible with: 2006, 2007, 2008, 2009, 2010, 2011, 2012 Mazda MX-5 Miata..
  • 30-Day Money Back Guarantee: Will fit your Mazda MX-5 Miata seats or your money back..
Check Stock

KSaAuto 5 Colorful Stainless Steel Antenna for Mazda MX-5 Miata RF ND NC 2006-2022 ┃ OEM NF47-66-A30A ┃ Polished AM FM Radio Car Antenna(with Screw)

  • 【UNIQUE DESIGN FOR MAZDA MX 5】This Miata antenna replacement very cute & stubby & more durablewhich & nicely looks with no rough edges. The....
  • 【FITMENT】Fits seamlessly on 2006-2022 Mazda MX-5 Miata RF ND NC. Original factory OEM: NF47-66-A30A,NF4766A30A.
  • 【EXCELLENT RECEPTION】Our interface and spring inner core are made of high-conductivity copper alloy. After hundreds of trials, we have made an AM....
  • 【CAR WASH PROOF】Our Mazda antennas are all made of the highest quality colorful 304 stainless steel, and the interface and spring are made of....
  • 【EASY TO INSTALL IN SECONDS】Upgraded copper interface with original thread and caliber, perfect fit for 2006-2022 Mazda MX-5 Miata models. Install....
Check Stock

BRExhaust Stock Replacement Exhaust Kit For Mazda Miata MX-5 MX5 NA 1990 1991 1992 1993 1994 1995 - BRExhaust 106-0246 New

  • Fits, sounds and performs just like OEM - bolts on for an easy DIY installation, with no cutting or welding required. Longer exhaust pipes are replaced by multiple smaller sections, so they can be installed without having to remove axles or suspension..
  • Exhaust kits are manufactured from corrosion-resistant aluminized steel and include all the hardware, clamps and gaskets required for installation.
  • Leaves all emissions equipment intact, making it 50-state emissions compliant.
  • Fits 1990-1995 Mazda MX-5 Miata (chassis code NA).
Check Stock

Rear Muffler - Compatible with 1990-1995 Mazda Miata 1.6L 1.8L 4-Cylinder

  • Compatible with or fits: 1994 - 1995 Mazda Miata 1.8L 4 Cyl | 1990 - 1993 Mazda Miata 1.6L 4 Cyl.
Check Stock

Bosch 9621 Double Iridium OE Replacement Spark 4X Longer Life (4 Pk) Lexus CT0h, Mazda: CX, MX-5, 3, Sport, 6, Scion: iA, iQ, xD, Toyota: Corolla, iM, Matrix, Prius, Plug-in, V, Yaris, 4 Pack

  • Double Iridium firing pin and ground electrode inlay provide 4X longer service life compared to standard copper plugs.
  • 0.6mm fine wire firing pin provides superior ignitability and performance.
  • 360 Degree continuous laser weld fuses corrosion resistant iridium firing pin to base for increased durability.
  • 7 year performance satisfaction guarantee.
  • Original equipment, pre-gapped replacement delivering optimum fit, form and function.
  • 11-15 Lexus CT0h, 16- Mazda CX-3, 17-18 Mazda CX-5, 16- Mazda MX-5 Miata, 13,15-18 Mazda 3, 15-18 Mazda 3 Sport, 14-18 Mazda 6, 09-10 Pontiac Vibe, 16 Scion iA, 12-14 Scion iQ, 13-14 Scion xD, 13- Toyota Corolla.
  • 17-18 Toyota Corolla iM, 14 Toyota Matrix, 10-15 Toyota Prius, 12-15 Toyota Prius Plug-In, 12-17 Toyota Prius V, 16-18 Toyota Yaris, 17-18 Toyota Yaris iA.
Check Stock

Replacement for 1990-1997 Mazda Miata MX-5 NA | JDM Feed FD Style ABS Plastic Primer Black Side Skirt Rocker Panels Extension

  • 100 % Brand New Condition, A Brand-New, Unused, Unopened, Undamaged Item in its Original Packaging (Where Packaging is Applicable)..
  • Package is Included With 1 X Pair of Mazda Miata FD Style Side Skirts & 1 X Bag of Installation Hardware.
  • Drilling Holes are Pre-Drilled / Marked on Items' Surface. Hardware is Included for Direct Bolt-On Installation.
  • Free Shipping For US 48 States With One Year Limited Manufacture Defective Warranty.
Check Stock

KFE KFE636-104 Ultra Quiet Advanced Premium Ceramic Brake Pad REAR Set Compatible With:1994-2005 Mazda Miata Excludes MazdaSport, Sports Suspension, Protégé ES; Ford Escort; Mercury Tracer

  • OEM Fitment and Warranty – Perfect fitment, no issues, and no hassle Limited Warranty.
  • Low Noise - Dual-Rubber Shims dramatically reduces vibration noise.
  • Less Break-In Time - Thermo Scorched manufacture process help reduce break-in time.
  • Increase Brake Bite, Long Life – Slots, and Chamfered edges features enhances brake bite, extends pad life and reduces noise. *Please check per your vehicle application.
  • not all applications have slotted/chamfered features.
  • Compatible With REAR Brake Pad For: 1997-2003 Ford Escort Rear Disc, 1999-2005 Mazda Miata Excludes MazdaSport/Sports Susension, 1994-1997 Mazda Miata, 1995-1998 Mazda Protege ES, 1997-1999 Mercury Tracer Rear Disc.
Check Stock

RED WOLF Car Door Speaker Wire Harness Plug Connector Replacement For 1988-2008 Subaru, Mazda, Nissan, Volkswagen, Suzuki Older Vehicles

  • Compatible with Volkswagen Jetta 1993-1997, Volkswagen Dasher 1976-1981, Volkswagen Passat 1990-1997, Volkswagen Rabbit 1980-1984, Volkswagen Corrado 1990-1993, Volkswagen Quantum 1982-1988..
  • Compatible with Mazda: 1991-2003 Mazda miata, 2000-2003 Mazda MPV, 1999-2002 Mazda Protege, Mazda 323 1986-1989, Mazda 626 1986-1989, Mazda MX-6 1986-1989, Mazda RX-7 1984-1989. Compatible with Ford Aspire 1995-1997, Ford Contour 1995-2000, Ford Festiva 1988-1993, Ford Contour SVT 1996-2001..
  • Compatible with Nissan 1987-1993 Pathfinder, 1993-1995 Nissan 240sx, Nissan 200SX 1980-1988, Nissan 240SX 1989-1994, Nissan 300ZX 1984-1989, Nissan Maxima 1982-1994..
  • Compatible with 1999-2005 Subaru Forester, 1990-2007 Subaru Legacy, 2004-2008 Subaru Impreza Outback Sport, 2001-2004 Subaru Baja, 2008 Subaru Outback Rear Speakers..
  • Compatible with 2005-2017 Suzuki Grand Vitara, 2010-2013 Suzuki Kizashi, 1998-2005 Suzuki Esteem. Suzuki Aerio 2002-2004, Suzuki Swift 1992-2001..
Check Stock

Extreme Online Store Replacement for 1990-1997 Mazda Miata MX5 MX-5 NA | KG Works Style ABS Plastic Primer Black Rear Trunk Lid Wing Spoiler

  • 100 % Brand New Condition, A Brand-New, Unused, Unopened, Undamaged Item in its Original Packaging (Where Packaging is Applicable)..
  • Package is Included with 1 X Mazda Miata KG Works Style ABS Plastic Rear Spoiler & 1 X Bag of Hardware.
  • Test Fitted Prior Shipment to Ensure Fitment Issue ( Guarantee to Fit ). Hardware is Included for Direct Bolt-On Installation.
  • Free Shipping For US 48 States With One Year Limited Manufacture Defective Warranty.
Check Stock