Categories

Best Mechanical Oil Flow Meter

Automotive Smoke Machine Leak Detector VXSCAN EVAP Vacuum Leakage Tester Fuel Pipe Diagnostic Tester with Flow Meter & Pressure Gauge for All 12V Vehicles

  • 【EVAP SMOKE MACHINE】VXSCAN V3 is a professional vacuum machine for car fuel pipe system leak detection. Supports EVAP system test, tightness test,....
  • 【EASY TO USE】By heating USP mineral oil or baby oil, the automotive smoke machine can be outputs lots of smoke within 30 seconds, to improve....
  • 【SMOKE FLOW METER & PRESSURE GAUGE】Equipped with pressure gauge and adjustable flow meter which helps you control the smoke effect easily. When....
  • 【Air Mode & Smoke Mode】The V3 smoke leak tester adopts an independent switch control design, the air mode independently controls the built-in air....
  • 【WIDELY COMPATIBILITY】Our package includes all accessories (Oil not included), it supports detect the leaks of multi pipe systems on cars,....
Check Stock

Ancel S3000 EVAP Automotive Smoke Machine Leak Vacuum Diagnostic Tester with Oil Level Gauge & Air Flowmeter for All Vehicle Boat Truck Motorcycle

  • ...bine system, intake manifold, vacuum line, etc..
  • [High performance and high-quality metal structure] Compared to other simple smoke leak diagnostic testers, the ANCEL S3000 smoke machine not only has a built-in air pump, but also has a pressure gauge and an adjustable flow meter. The compressor generates air pressure from 0.8 to 14.5 psi, allowing smoke to be easily introduced into the tested sealing system, speeding up the leak detection process..
  • [Pressure gauge+adjustable flow meter] You can judge whether the tested system has a leak by the pressure change of the pressure gauge. By adjusting the size of the flow meter, you can also better control the amount of visible smoke to locate specific leaks. There are separate air mode and smoke modes to meet your different needs..
  • [Easy operation] A few simple steps can help you detect leaks in the vehicle system. (1) Add tobacco oil (USP mineral oil/baby oil), you need to buy it separately. (2) Check the power cord (12V DC car battery). (3) Connect the system and test for leaks..
Check Stock

Vehicle Maintenance Log Book: Easy-to-use Vehicle Service and Repair Record Book

  • Flow Rate of up to 7.1 Gallons with the Included 110V DC Plug-In Adapter, Plug-In Pump, Flip the Switch and Squeeze the Trigger to being the Flow.
  • Compatible with Engine oil, Hydraulic fluid, DEF, Diesel, Kerosene, Washer Fluid, Antifreeze, Non-Potable Water and more.
  • Discharge Hose Length of 6.6 ft with Flow Control Nozzle / Adjustable Intake Tube Reaches from 2.8 ft to 4.1 ft to fit 55 Gallon Drums to IBC Totes.
  • Digital Oil Meter - 35L Flow Rate of Low Viscosity Fluids.
  • Backed by a 1 Years Limited Manufacturer Warranty on Defects / Do Not Use with Chlorinated Acids or Drinking Water.
Check Stock

CGOLDENWALL Handheld Ultrasonic Flowmeter Clamp on Flow Meter Portable Liquid Flow Meter with  S1+M2 Transducers for Copper/PVC Pipe DN15-700mm 1/2-28\ ((Old or New Panel))

  • S1+M2 TRANSDUCERS: Easy to setup the transducers on the pipe and enter the required information in the control unit.No need to destroy the pipeline and stop production during the measurement process.S1(DN15-100mm, 1/2-4"), M2(DN50-700mm, 2-28").
  • DIGITAL DISPLAY: The Ultrasonic Flowmeter can display cumulative flow, instantaneous flow, velocity, and working status at the same time. Accuracy: 1%, linearity: 0.50%, repeatability: 0.20% accuracy: ±1%, calibration certs included. Note: In order to provide a better user experience, we upgraded the product label. The product you received may be the old version or the new version.
  • DATA STORAGE AND OUTPUT: This Ultrasonic Flow Meter has a built-in data logger, which can store up to 2000 lines of measurement data. And you can download the logged data onto PC through the RS232 interface..
  • LONG STAND TIME: This Flow Meter is equipped with a built-in high-capacity rechargeable battery, which can support the flowmeter to work continuously for up to 12 hours..
  • WIDE APPLICATION: Come with S1+M2 transducers, and the measuring range is DN15-700mm, 1/2-28". It can work on Copper pipe, PVC pipe to detect the flow of liquids such as sea water, alcohol, river water, industrial sewage, lubricating oil, diesel, fuel oil, etc.N....
Check Stock

Oil Fluid Extractor Pump Suction Gun Transparent Body Changer Vacuum 200cc Chamber Capacity Manual Water Suction Convenient Tool No Leaks No Overfills Hand Gear Transmission With Cartoon soft adhesive

  • 【OIL TRANSFER PUMP 】The electronic oil meter gun with rigid tube and manual tip or flexible hose and semi-auto tip, with the appropriate connection to establish a controlled flow through the meter. Used for filling fluid such as gear oil, engine oil, antifreeze, it is a great oil filling equipment for factories, gas stations, etc..
  • 【SPECIFICATIONS 】5-digit liquid crystal display for both volume each time and total.
Check Stock

Horiba 9096001700 Plastic Body PH Electrode

  • Modular design makes it suitable for use with output modules, sensors and remote transmitters.Compact structure, easy to install.Intuitive clear reading, high reliability, measuring accuracy is ±1%.High-definition displays show both instantaneous and cumulative flow.Can be widely used to measure diesel, kerosene, gasoline, etc..
  • This digital turbine flow meter has modular design, high accuracy, compact size and stable performance. Easy to replace and maintain internal components. Suitable for use with output modules, sensors and remote transmitters..
  • Malfunction and solution:The flow meter is not accurate. 1. The method of field calibration is not correct. Calibrate again. 2. The flow rate on the meter is below the lowest. Increase the flow rate. 3. The flow meter is blocked by the dry liquid. Take out the impeller and clean it carefully and make sure the impeller turns freely..
  • 4. The impeller is wrapped by the sealing material. Remove the meter and make sure the impeller turns freely. 5. Too close to the impeller. Install properly 6. Too close to the motor or electronic noise environment.
  • The meter can not calibrate. 1. Circuit board is break down. Replace the circuit board. 2. Button is fail to press. Replace the circuit board..
Check Stock

TOPCHANCES Portable 0-200ml/min Digital Gas Air Nitrogen Oxygen Mass Flow Meter Gas Air Flow Rate Tester MF5712 Compressed Air Digital Display Tester for Inactive Gas

  • Ultra low power by batteries or optional external AC adaptor.Internal data storage for additional data safety..
  • Potable design with rotatable meter head and easy exchangeable mechanical adaptors..
  • Hygienic and oxygen safe copper body for various fluids.User programmable range alarm for safety and other monitoring/control functionality..
  • Applications:MF5706 Gas mass flow meter suitable for different gas(Like air, compressed air, oxygen, nitrogen, CO² and other inactive gas ect.)....
Check Stock

CGOLDENWALL Turbine Flow Meter Fuel Meter Digital Flowmeter with FNPT Thread, Flow Meter for Water Diesel Kerosene Gasoline, Flow Rate Range 2.5-26GPM (1 inch Flow Meter)

  • FLOW METER: Before use, please calibrate the flow meter with the liquid to be tested. And the flow rate of the liquid should exceed 2.5 gallons per minute, if the flow rate is too slow, the flow meter cannot measure normally. There is no battery included..
  • MULTI-FUNCTION DISPLAY: High-definition LCD display, can read single cumulative flow, instantaneous flow and total cumulative flow. The clear function can clear the value of cumulative flow, to make sure it is always within the measuring range. If your flow meter cannot work, please contact us in time..
  • HIGH-QUALITY MATERIALS: The aluminum alloy housing is sturdy, durable and corrosion-resistant, which have a long service time. The PCB circuit board make the battery have a long service life, and safe in use. Please NOTE: the LCD display is not water proof.
  • INSTALLATION: The flowmeter can be installed in horizontal and vertical directions, but the flow direction of the liquid needs to be consistent with the direction of the arrow on the flowmeter. There is no direction requirements for the installation of the display screen..
  • MEASURABLE LIQUIDS: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids..
Check Stock

DIGITEN Water Flow Control Meter LCD Display Controller+G1/2\ Water Hall Sensor Flow Meter Flowmeter Counter 1-30L/min+G1/2\ Solenoid Valve Normally Closed N/C+DC 12V Power Adapter

  • ...c. For example, if you want 5 liters of water, you can set up 5 liters of water on the DFC15 controller. When the water in the container reaches 5 liters, the controller will control the solenoid valve to close it, the water flow automatically stops, and you just get 5 liters of water. Please select a suitable flow meter. An oil flow meter is required for liquids other than water..
  • ★【Package Includes & Warranty】: Thread type: BSP, but it can work with NPT thread. The controller will come with G1/2" flow sensor, G1/2" solenoid valve(N/C), temperature sensor(it can measure liquid temperature) and 12VDC power adapter. 12 month warranty!.
Check Stock

CGOLDENWALL Turbine Flow Meter Digital Fuel Flowmeter with FNPT Inlet/Outlet, 1inch Flow Meter for Water Diesel Kerosene Gasoline, 2.5-26GPM /9-100LPM (1 inch)

  • FLOW METER: the 1 inch flow meter can read instantaneous flow rate, single cumulative flow and total cumulative flows. But it has minimum flow rate requirment, if the flow rate of the tested liquid is lower than 2.5 gal/min, the readings will be inaccurate..
  • TECHNICAL PARAMETERS：① diameter of water inlet: 32mm.
  • ③ the flow speed requirenment for tested liquid: 2.5~26 gal/min.
  • ⑥ max temp of tested liquid: 158°F/70°C.
  • MULTIPLE UNITS: the flow meter provide 4 meauring units for option, which are liter, gallon, pint and quart. The unit defaults to gallons, if the unit is not gallons, please refer to the user manual to change the unit to the needed one..
  • NOT WATER PROOF: the flow meter is not water proof, please keep the display from water during use, to avoid chip damage. We upgraded The flowmeter has been upgraded from never-sleep model to auto-sleep model, which automatically dims the screen when no liquid is flowing through it..
  • WIDE APPLICATION: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids. If there is any problem, please contact us in time..
Check Stock

AlphaWorks Double Diaphragm Transfer Pump 1/2" Nitrile/NBR/Buna-N - 12GPM / 45LPM Heavy Duty Aluminum Air Operated Pneumatic Use for Diesel, Kerosene & Oil

  • Flow Rate of up to 7.1 Gallons with the Included 110V DC Plug-In Adapter, Plug-In Pump, Flip the Switch and Squeeze the Trigger to being the Flow.
  • Compatible with Engine oil, Hydraulic fluid, DEF, Diesel, Kerosene, Washer Fluid, Antifreeze, Non-Potable Water and more.
  • Discharge Hose Length of 6.6 ft with Flow Control Nozzle / Adjustable Intake Tube Reaches from 2.8 ft to 4.1 ft to fit 55 Gallon Drums to IBC Totes.
  • Digital Oil Meter - 35L Flow Rate of Low Viscosity Fluids.
  • Backed by a 1 Years Limited Manufacturer Warranty on Defects / Do Not Use with Chlorinated Acids or Drinking Water.
Check Stock

10Pcs Car Temperature Gauge Kit-Coolant Temperature Gauge - Digital Temperature Gauge 2inch 52mm Universal Car Truck LED Water Meter Instrument Tool

  • ❃Application: The water temperature meter is used to measure the water temperature of a car. The number and indicator can clearly show the water temperature. - 12v car water temp gauge.
  • ❃ High quality: The water temperature gauge is made of ABS, sturdy and durable.ABS has excellent complete physical and mechanical properties and good low temperature impact proof. Dimensional stability. Electrical properties, wear proof, chemical proof, dyeing, finished product processing and mechanical processing are better. - car temperature gauge kit.
  • ❃Easy to read in the dark: The blue light on the dial makes it easy to read in the dark. Its measurement range is 40-120 degrees Celsius. High sensitivity, easy and convenient to use. - reloj temperatura fae.
  • ❃Application: The water temperature meter is used to measure the water temperature of a car. The number and indicator can clearly show the water temperature. - coolant temp gauge.
  • ❃Principle: The water temperature sensor is a thermistor sensor. Screwed to the engine cooling water channel. The thermistor determines the amount of current flowing through the coil of the water temperature gauge. To guide the meter hands - coolant temp gauge.
  • ❃ High quality: The water temperature gauge is made of ABS, sturdy an....
Check Stock

DuraChoice 2\ Brass Gate Valve - 200WOG, FxF NPT

  • Made of high quality brass material, this gate valve is sturdy and durable..
  • The internal fluid path of valve body is straight through which allows fluid to flow in a straight line and the flow resistance is small..
  • It's easier to open and close, because the movement direction of the gate is perpendicular to the flow direction, whether on or off..
  • It is suitable for water, oil, gas, steam, etc..
  • Widely used in mechanical equipment, chemical equipment, industrial equipment, water supply and drainage equipment, pharmaceutical equipment, petrochemical equipment, etc..
Check Stock