Categories

Best Medical Pipe Extruder

Ewigkeit MK8 Hotend Ender 3 and Pro Assembled Extruder with Aluminum Heating Block 0.4mm Nozzle(24V 40W)

  • Ender 3 hot end with 100% original and high quality accessories for Creality 3D printer.
  • Ender3 pro Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heater cartridge is 24V 40W.
  • Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament.
Check Stock

ELEGOO Neptune 3 Pro FDM 3D Printer with Auto Bed Leveling, Dual-Gear Direct Extruder, Dual Lead Screw Drive, Removable Capacitive Screen, 225 x 225 x 280 mm³ Large Printing Size

  • ...en by silent stepper motors for quieter and more precise movement during printing, which reduces the noise as low as 47-48dB. The easy-to-setup printer comes with the main components pre-assembled, as well as a complete tool kit for quick installation..
  • 【Dual-Gear Direct Extruder】The new dual-gear direct drive extruder is made of SUS303 high-quality stainless steel with a 3:1 reduction ratio and stronger extrusion force for smoother filament feeding and more stable & accurate printing, which greatly reduces nozzle clogging and under-extrusion issues, printing effect is better than Bowden extruder. Compatible with multiple filaments such as PLA, TPU, PETG, and ABS..
  • 【Nozzle Kit for Better Printing Effect】The nozzle kit contains a TC4 titanium alloy throat pipe, an aluminum alloy flat heat sink structure, and a brass nozzle.The widened aluminum heat sink paired with the front close-fitting efficient cooling fan for a better heat dissipation effect and lower the temperature of the throat pipe, thereby reducing the possibility of nozzle clogging..
  • 【Smarter Printing Experience】Auto mesh bed leveling adopts a non-....
Check Stock

HICTOP Ender 3 Hotend Ender 3 Pro Hotend 24V 40W Full Assembled Extruder Kit Accessories with Silicone Cover for Ender 3, Ender 3 Pro 3D Printer

  • 1 Fully assembled extruder, Plug and Play Ender 3 Pro Hotend, you do not need to cut it..
  • 2 Compatible with Ender 3, Ender 3S, Ender 3 Pro and similar 3D printer..
  • 3 There are 2 fans, fan covers, heat block, cooling block, nozzle, throat pipe, connector, teflon pipe, thermistor sensor, heating tube, silicone cover, etc..
  • 4 24V high speed fan, lose heat quickly and efficiently.
  • nozzle and tube connect seamless, prevent material leaking and blocking..
  • 5. Silicone Cover is provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and consistency.
Check Stock

Creality Official Upgrade Extruder MK8 Extruder Alloy Block Bowden Extruder 1.75mm Filament for Ender 3 Series Ender 5/5 Plus/Pro CR-10 Series 3D Printer

  • COMPATIBILITY--- All Metal MK-8 Extruder Feeder Drive 1.75mm Filament. It makes loading the filament easier and smoother, with no worries about....
  • UPGRADE METAL EXTRUDER---The upgrade Creality3D silver metal Bowden extruder is an update for the plastic extruder. Upgrade your Creality 3D Printer....
  • WORK BETTER--- the extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printers'....
  • EASY TO ASSEMBLE--- Our metal extruder kit includes all the necessary screws & parts needed, it can directly replace your old original fragile plastic....
  • OFFICIAL HIGH QUALITY--- Full metal aluminum alloy material makes our extruder kit more stable and durable. And it has stronger pressure pushing the....
Check Stock

Official Creality 3D Extruder Feeder Drive MK-8 Aluminum Upgraded 1.75mm for CR-10 Ender 3 CR-10S (Black)

  • 【Upgrade Black Extruder】All Metal MK-8 Extruder Feeder Drive 1.75mm Filament. It makes loading the filament easier and smoother, with no worries about filament scraping or breaking. This extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware..
  • 【Wide Application】The upgrade Creality3D silver metal Bowden extruder is compatible with nearly all models of 3D printers(Ender 3/3 Pro, Ender 3 V2, Ender 3 Max, Ender 5/5 Plus/5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR-10 S5, CR-10S, CR-10 Plus, CR-X, CR 20/20 Pro). No need to change stepper motors or other mounting hardware..
  • 【Very Easy to Install】 Unbolt the old original Creality plastic extruder & screw in the new Metal Extruder and ready to start printing. Our metal extruder kit comes with an instruction on how to put it together, which makes it easier to install. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame.
  • 【Durable】 All-metal aluminum alloy, DIY aluminum block and you need to be assembled by yourself. Giving a much smoother travel and print quality. Fits a 1.75mm filament..
  • 【Official Creality Original Quality】This high-quality all-aluminum construction is guaranteed to last for years,....
Check Stock

Bowden Extruder V2.1 RNC Nano Coated Gear DDB Universal Geared Extruder for 3D Printer

  • Kit includes: 1pc Universal Geared Extruder w/ RNC Nano Coated Gear, 1pc Screws package, 1pc Installation tools package, 1pc Stepper motor mounting bracket.
  • Upgraded High performance extruder for 3D Printer.
  • Upgrade Highlights: 1. The position of the gears and the accuracy of all screw holes are calibrated. 2. Modified the new buckle, both sides of the V2.1 version of the DDB extruder support filament running thru in and out (it has no specified direction, and you are able to use either side of the material ports).
  • 3. The filament has an independent motion cabin inside the extruder. The new white filament guide inside the extruder is helping the filament running smoothly. 4. The new outer shell design with edge cut on the top of the extruder is reserved for the screw rod of Ender 3 printer. 5. Upgraded shell using new mixed materials.
  • ***Please make sure Gears are Installed and Precisely Aligned before printing, they will perform successfully.
Check Stock

Heidolph Temperature Sensor for Laborota 4003 Series Control Rotary Evaporator

  • Main structural parts made of corrosion-resisting Stainless steel, Long Using Life-span..
  • Transparent protective cover, heat preservation, saving energy, burst-proof, splash-proof, antirust, antiseptic..
  • Vertical condenser with feed-in pipe, big condensing pipe, big evaporating pipe, evaporating rate is more superior than rank instruments..
  • Evaporator is used for concentration, crystallization, separating and recovery biochemistry, organic chemistry, medical and experiment & scientific research of institutes and universities..
Check Stock

Official 3D Printer Extruder Upgraded Aluminum Drive Feed Extruders Accessories for 3D Printer 1.75mm Filament Works with Creality CR-10 Series Ender 5 Series Ender 3 Series

  • ✔️Durable Material -- High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term....
  • ✔️New Upgraded Design -- The upgraded red extruder has removed pneumatic joint so as to increase gear density, preventing the joint fracture....
  • ✔️Improved Performance -- The optimized extruder with metal extrusion and original hot-end kit pushes the filament into printer nozzle, greatly....
  • ✔️Install Easily -- You just remove the old Creality extruder & screw and then install the new red extruder. All the necessary accessories are....
  • ✔️Wide Compatibility -- Red extruder is suitable for Creality 3d printers accessories: Ender-3 series, Ender-5 series, CR-10S, CR-10, CR-10mini,....
Check Stock

5Aplusreprap Upgraded Dual Gear Extruder Single Connector for Creality Ender 3 CR10 / Pro CR-10S 3D Printer 1.75mm Filament (2 x Extra Gears), Right Hand

  • Package Include: Single connector upgraded dual gear extruder right-handed 1 Set - extruder aluminum block DIY kit with 4pcs quality stainless steel gears.
  • Main Material Instruction: Material for extruder: Aluminum Alloy . Material for the gear in extruder kit : Stainless Steel. For filament: 1.75mm.
  • Advantages: This is an upgraded version of CR10 extruder. A newly added extrusion wheel makes the filament feed more stable. The design of the double-concave gear also reduces the embossing of the consumables by the extrusion wheel..
  • Features: The mould steel spring is very rigid, strong in pressure and very durable..
  • Tips: For most Ender/CR Series 3D Printers, please choose the right-handed extruder..
Check Stock

Redrex Ender 3 Extruder Bowden Aluminum Upgraded with 40 Teeth MK8 Drive Gear Kit Compatible with Creality Ender 3V2 /Ender 3 Pro/CR-10 Series and Other Reprap Prusa 3D Printers [Right Hand]

  • 【Application】:This metal extruder is compatible with Creality Ender 3 V2,Ender 3 Pro,Ender 3,CR-10,CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10....
  • 【Direct Drive Extruder】:The upgrade extruder supports direct extrusion.A direct drive extruder improves extrusion and retraction by removing the....
  • 【Filament】：The extruder feeder supports PLA/ABS/Wood/Hips/Flexible/PTEG,with 40 teeth drive gear feeds the 1.75mm filament very smoothy..
  • 【Durable Feeder】:The extruder feeder is made of heavy-duty aluminum alloy material,which is more durable and stable than the plastic one..
Check Stock

TRONXY Original Extruder Assembled MK8 Hotend Kit for 3D Printer with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle，Bowden Extruder kit

  • 100% TRONXY Orginal MK8 Full Set Hotend Kit.
  • Suitable For TRONXY XY-3 Seriers 3D Printer.
  • Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon).
  • MK8 Extruder Hot End Kit With thermistor 100K and Heater 24V 50W.
  • Thermistor and heater cable length: 1.2 m ,Feed tube:50cm.
Check Stock

Creality Upgraded MK-8 Metal Feeder Extruder Frame Aluminum Gray Bowden Extruder Drive for Creality Ender 3/3 Pro/3V2/5/5 Plus, CR-10 Series, CR -10S/20/20 Pro 3D Printer

  • WIDE APPLICATION: The extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware. Suitable for Creality 3D Printers Ender 3/3 Pro, Ender 3 V2, Ender 3 Max, Ender 5/5 Plus/5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR-10 S5, CR-10S, CR-10 Plus, CR-X, CR 20/20 Pro..
  • ADVANTAGES: Pushing the filament into the printer nozzle with more pressure to improve the performance of the printer. The bolt of our extruder kits is adjustable so that you can adjust the pressure of the extruder gear as needed..
  • EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new Metal Extruder and ready to start printing. This extruder DIY kit comes with an instruction on how to put it together, which makes it easier to install. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame..
  • STABLE: All-metal aluminum alloy, DIY aluminum block and you need to be assembled by yourself. Giving a much smoother travel and print quality. Fits a 1.75mm filament..
  • CUSTOMER SUPPORT - If you have any problems with our product, please feel free to contact us. We will respond within 24 hours and offer professional technical support to you..
Check Stock

Bowden Extruder Upgraded V3.0 Dual Drive Gear High-Performance Parts for CR10,Ender 3 Series,Anycubic Mega S, I3 Mega Chiron,Tevo Tornado, Wanhao D9, Anet A8 E10 and Prusa I3 DIY 3D Printer

  • Latest Dual Drive Extruder for Most 3D printers..
  • Update1: SIMAX3D Dual Gear Extruder V3.0 make an independent feeder inside to make filament wiring go inside and out super smoothly..
  • Update2: SIMAX3D Dual Drive Extruder V3.0 change the bowden buckle to pneumatic connector, you’re able to switch only this part after long time use instead of the whole extruder..
  • Update3: This Geared Extruder has an angle for Z-rod which is adapted to those 3D Printer who has an close Z axis installed like Ender 3 old version..
  • Package Include: User Manual*1. SIMAX3D Dual drive extruder set *1.
Check Stock