Categories

Best Meida Abrasive

2pcs O Ring Sandblasting Gloves Holder Sandblast Cabinet Parts Sand Blast Accessories for Sandblasting Machine

  • For use with most Skat Blast Vacuum Systems. Collects 30-40% of reusable abrasive, and extends vac bag/filter and motor life!.
  • Skat Blast Vacuum Abrasive Reclaimer mounts in-line between your abrasive blast cabinet and vacuum..
  • During use, reclaimer instantly starts collecting and separating sharp, reusable abrasive. Broken-down, powderized abrasive travels through reclaimer and into vacuum where it is collected and can later be disposed of. Sharp, reclaimed abrasive stays in reclaimer and can be drained into a bucket and poured back into your cabinet for reuse..
  • Fits model 780, 780-TL, 800-T, SC-33, SC-33V (requires closing latch on 780-TL, 800-T, SC-33 & SC-33V lid to be relocated), SC-35V, SC-45V, SC-28, SC-28V, 850, 850-T, SC-34, SC-40, 940-DLX, 930, 935, 950, 951, 952, SC-46, 960, 960-DLX, 960-T, 960-SE, SC-58, 970, and 970-DLX cabinets..
Check Stock

AUSTOR 77 Pieces Abrasive Wheels 1 Inch Buffing Polishing Wheel Set Polishing Wheel for Dremel Rotary Tool, 7 Grits

  • Plentiful quantity - package include 77 pieces abrasive wheel in 7 grits, 11 pieces for each grit.
  • the brown polishing wheel is 120 grit, the green is 180 grit, the red is 240 grit, the black is 400 grit, the thick white is 800 grit,the thin white is 1000 grit, two white grit abrasive wheel can be tell easily by touch.
  • Appropriate size - the dimater of the abrasive wheel is 1 inch (25mm), shank diameter is 1/8 inch (3mm), total length with abrasive wheel is 1.8 inch (46mm).
  • Wide application - different grits abrasive wheel are suitable for various of polishing on your demand, such as rotary rools, grinder, jewelry, cleaning grills, and removing paint.
  • Warm note - the abrasive wheel is consumables, so that we offer 77 pieces for replacement, 7 grits, 11 pieces for each grit.
  • Good for dents - AUSTOR buffing polising wheel help to achieve a smooth, evenly finish and conformability to irregular surfaces with minimal smearing.
Check Stock

Portable Sandblaster Gun & Soda Blaster: Handheld, Gravity-Feed Abrasive Blaster with Gloves, Goggles, Nozzle (SUPER-FUNNELING TECHNOLOGY)

  • BETTER FLOWING SANDBLASTER: Unlike most sandblasters that have issues with abrasive flow, SandblasterINFO provides a gravity feed hopper so abrasive can not only be siphoned, but be forced down with gravity..
  • LESS FRUSTRATION, BETTER CONTROL: Now you can get the job done fast with less setup while blasting with a smooth, consistent flowing stream of abrasive. Say goodbye to clogging issues and lugging around heavy sandblast equipment..
  • PORTABLE SAND BLASTER DESIGN: This is a perfect size for most small to medium size sandblasting projects. Use with all types of abrasive such as soda blast, walnut, plastic, glass beads, coal slag, garnet, aluminum oxide, silicon carbide and other media..
  • SUPER-FUNNELING TECHNOLOGY: Unlike competitors, our UPGRADED DESIGN utilizes an improved design which allows better funneling of abrasive. Easily adjust the knob to control the abrasive to air ratio for a desired blast rate..
  • Clean Rust, Paint or Etch! BONUS Kit: Includes nozzle, googles, gloves + Ebook on Sandblasting 101. 100% Money Back Guarantee..
Check Stock

Walter 12D013 Mounted Point - A-3 Type, A36 Grit Abrasive Grinding Bit for Die Grinders, Pointed Grinders, Shaft Machines

  • Abrasive Grinding: the mounted point is made from finest abrasive grain to ensure long life and a uniform finish. This grinding bit delivers smooth operations with superior performance.
  • Functions: the grinding mounted point is used for fitting, shaping, enlarging holes and other finishing tasks. The unique design of the abrasive point makes it suitable for fine grinding even in confined spaces.
  • Applications: this abrasive mounted point is designed to fit die grinders, point grinders and other flexible shaft machines. The abrasive grinding point is dressed for perfect balance without run-out or vibration.
  • Features: allow the abrasive grinding bits to cut faster and produce a better surface finish. You can use the dressing stones to extend the tool life.
  • Specifications: the finishing mounted point with 1 in. diameter and 2-3/4 in. length is extended by precisely centered 1/4 in. shaft. The metal grinding bit can be used on stainless steel at a maximum speed of 16100 rpm.
Check Stock

Work Sharp WSSA0002044 Honing Abrasive Kit

  • Add to the functionality of your H9945 WorkSharp wood tool sharpener.
  • For use with WorkSharp WS2000 and WS3000 tool sharpeners.
  • Includes 1 3600 150-millimeter Micro-Mesh abrasive and 1 6000 150-millimeter Micro-Mesh abrasive.
  • Add to the functionality of your WorkSharp wood tool sharpener.
  • Kit includes 1-piece 3600 150-millimeter Micro-Mesh abrasive.
  • Also includes 1-piece 6000 150-millimeter Micro-Mesh abrasive.
Check Stock

Zubastick Dental Finishing Polishing Strips Universal Kit 75 psc

  • blue-green segments for gross reduction (№ 1.050) - 25 pcs., green-yellow segments for contouring (№ 1.051) - 25 pcs., yellow-white segments for polishing (№ 1.052) - 25 pcs..
  • Thickness: blue segment - about 140 µm, green segment - about 120 µm.
  • Thickness: yellow segment - about 100 µm, white segment - about 90 µm.
Check Stock

WENORA 7 Pack Abrasive Filament Nylon Wire Bristle Drill Wheel and Cup Brush Set - 1/4\ Hex Drill Shank - Remove Rust, Paint,Corrosion

  • A durable abrading brush with coarse abrasive grit embedded into the nylon brush strands, so it quickly and easily removes rust, corrosion, and also sands, scuffs, and deburrs metal, wood, plastic, and ceramic surfaces..
  • The ideal abrasive cup brush to use for cleaning and prepping surfaces for sprayable truck bed liner coatings. It quickly scuffs and strips metal surfaces with the abrasive nylon strands without causing any sparks that metal brushes do. It also leaves the surface with a fine enough scuff scratch that a primer or truck bed liner coating can go directly over it..
  • Nylon cup and wheels abrasive brushes mounted on 1/4 inch hex shanks, fits any drill or Impact drivers.
  • This brush is designed to be effective and will last many times longer than a wire brush. Because, as the brushes nylon strands wear down, they expose fresh embedded abrasive grit that continues to provide consistent clean and fast scuffing and rust removal..
  • WHAT YOU GET : 7 pieces nylon filament abrasive wire brush set including nylon end brush, nylon wheel brush, nylon cup brush..
Check Stock

VCT Pneumatic Air Spark Plug Cleaner Sand Blaster Tool Cleaning + Blasting Abrasive

  • This tool cleans spark plugs with abrasive or air cleaning with the simple flip of a switch! The included abrasive material removes carbon build-up on....
  • Features include a flange on either side to easily fasten the spark plug cleaner to your workbench. Clean spark plugs and save at your home garage or....
  • Abrasive blasting removes carbon build-up on spark plugs.
  • Flange on each side lets you fasten the cleaner to your workbench.
Check Stock

Cubitron 3M II Roloc Fibre Disc 786C, 33389, 3 in (75 mm), 36+, 15 Discs per Carton

  • Cubitron II cuts 30% faster and lasts 2x longer than conventional ceramic abrasives.
  • Precision Shaped Grain (PSG) technology employs microreplication for extremely uniform abrasive.
  • Triangular PSG abrasive grains are supersharp and cut exceptionally fast.
  • Grains are electrostatically oriented on abrasive surface for efficient cut, even wear.
  • PSG selffractures during use to maintain sharpness and prolong abrasive life.
  • Stiff fiber backing and a strong resin bond lend this disc long life and tearresistance.
Check Stock

2 Inch Bristle Disc,6 Pieces Roloc Bristle Disc Grade - 120# 80# 50# Grit Abrasive Coating Removal Disc for Metal with 1/4 Inch Shank Attachment

  • 【6 Pieces 2 Inch Bristle Disc】 Roloc Bristle Disc Grade - 120# 80# 50# Grit Abrasive Coating Removal Disc/bristle disc grit brush ,has uniform grinding force, wear resistance, strong plasticity, and good softness. great for cleaning gasket surfaces material on engines.  .
  • 【More Grits Options】Use gray-White 120# abrasive bristle disc is designed for soft metal such as aluminum, It does not damage the surface of the object.
  • yellow 80# abrasive bristle disc and green 50# abrasive bristle disc can be applied on hard metal, such as steel. 6 Pieces of bristle disc in different color gives you more options of grits..
  • 【Huge time saver】Bristle disc using flexible bristles requires less force which can make your cleaning time-saving and labor-saving.
  • grit has a large contact area with the object, which can bring you efficient cleaning and it can maintain abrasive property throughout the life of the disc. never spend hours scraping gaskets and using harsh chemicals anymore..
  • 【WIDE USAGE】Bristle Disc uses for metal removing rust, paint, oxidation, varnish, surface contaminants, deburring, blend, finish, polish, clean, etc..
  • 【Complete tool kit】6 x abrasive bristle disc + 6 x 1/4" Shank Attachment, can collaborate with most multi-functional tool....
Check Stock

ICS 531747 Proforce-Abrasive 12-Inch Diamond Chain Fits 695F4 Gas Powered Saw

  • ProFORCE-25 Abrasive Chains cut 10 Inches on Hydraulic Saws.
  • ProFORCE-25 Abrasive Chains cut 12 Inches on Large Gas Saws.
  • Every other link in an ICS ProFORCE Abrasive Chain is a Diamond Segment.
  • The Segment Count can help you identify the chain.
  • Deep engagement drivelinks help keep cuts straight.
  • Water distribution feature allows for better lubrication between bar and chain.
  • Patent pending pitch design creates the optimal combination of weight and strength.
Check Stock

Teetool Dental Polishing Strips Teeth Abrasive & Finishing Strips 4mm x 6M, Fine (Blue)

  • for gross reduction - 20 pcs (diam.8 mm - 5 pcs..
  • for contouring - 20 pcs (diam.8 mm - 5 pcs..
  • for finishing - 20 pcs (diam.8 mm - 5 pcs..
  • for polishing - 20 pcs (diam.8 mm - 5 pcs..
Check Stock

Muye 2 Pcs Professional Folding Pocket Sharpener Kitchen Double Side Sharpener 400/600 Grit Portable Handheld Double Sided Sharpener Pocket Black&Orange

  • Foldablet: The knife sharpener is lightweight, compact, foldable and easy to carry. The fan-shaped lid protects the stones from damage..
  • 2 Abrasive Grains: The knife sharpener features double-sided diamond and uses 400# abrasive grains as coarse abrasive grains and 600# abrasive grains as fine abrasive grains, providing a perfect grinding solution..
  • Space Saving: The folding sharpener is small but powerful compared to traditional sharpening systems. It measures about only 4.9 inches long and 1.3 inches high, suitable for placing in your pocket and bag..
  • Non-Slip Handle: The ergonomic handle allows you to restore your cooking knife in just a few seconds! Simply place the blade in each slot and gently pull it a few times to achieve quick and effective grinding..
  • Wide Application: The knife sharpener is widely used in metal knives, ceramic knives, scissors, outdoor tools, garden tools, agricultural tools, etc. Essentials for your camping or home kitchen..
Check Stock