Categories

Best Memory Card Connector Board

YHJIC Professional Motherboard H61 LGA 1155 DDR3 USB 2.0 Board Support Core I3 I5 I7 Quad CPU Dual Channel Desktop Computer Mainboard

  • ...e Intel B75 series, and the motherboard has integrated 6-channel sound card and RTL8105E network card chip..
  • 【Model & Memory & Interface】The CPU socket is LGA1155, and the CPU type supports i3, i5 and i7 series. The maximum memory supports two 8G memory, memory type DDR3 1066/1333/1600MHz desktop memory. The I/O connector has 1 USB keyboard and mouse universal interface, 1 RJ45 network interface, 1 audio interface, 2 USB2.0 interfaces and 2 USB3.0 interfaces..
  • 【Multiple expansion slots】The expansion slot includes 1 PCI-E×16 graphics card slot, 1 PCI-E×1 slot, 2 USB2.0 slots (1 group), 2 USB3.0 slots (1 group) ), 3 SATA2.0 interfaces and 1 SATA3.0 interface..
  • 【High-performance】It adopts 3 power supply modes, the power interface is a 4-pin and a 24-pin power interface, the SATA3.0 high-speed hard disk interface is adopted, and the SSD solid state hard disk high-speed transmission is supported. Core display HDMI high-definition graphics card, support VGA+HDMI dual output..
  • 【Please Note】It is best to be installed by professionals. When the motherboard is normally installed, there is no display, no boot, no picture, no network card, no sound card, etc., it is recommended that the customer restore the factory settings or find an eraser to wip....
Check Stock

SunFounder Mega 2560 R3 ATmega2560-16AU Board Bundled with R3 Board and Ethernet Shield W5100 for Arduino

  • ... ensure consistent and compatible with the original, but also easy to use..
  • R3 board compatible with Arduino. The board for Arduino use ATMEGA16U2 chip, Faster transfer rates and more memory.R3 board control using r3 ATmega328P chip. Includes new pin configuration (SCL, SDA, IOREF).Clearly print on the female header connector, more precise and easier to use the wire..
  • With this Ethernet Shield, for Arduino board can be used to connect to internet. Can be used as server or client. Directly plug puzzle board, no soldering required. It is directly compatible with Arduino official Ethernet Library. It adds a micro-SD card slot, which can be used to store files for serving over the network..
Check Stock

GODSHARK SD Card to 2.5 Inch IDE Adapter, SDHC SDXC MMC Memory Card Converter to Laptop HDD 44 Pin Male PATA Port

  • Adapt SD/MMC flash memory card to a super compact, cost efficient, anti-shock, low power consumption, no acoustic noise and fast access time HDD.
  • Enables SD/MMC card as a normal IDE 2.5" hard disk.
  • Provides an alternative for data storage and transfer or test for motherboard, sound/audio/memory card, etc..
  • Ideal for some devices that required a fast and easy bootable device such as POS. Be a SD/MMC card reader/writer.Compatible with SD, SDHC, SDXC & MMC specification.One 2.5" IDE hard disk driver 44pin male connector and one standard SD socket..
  • Supports PIO, Multi-Word DMA and Ultra DMA data transfer mode.Supports boot function.No external power required and powered from IDE interface.Easy installation and no driver required.Mini board design and no space wasted.Dimensions: 36mm x 52mm.Attention: This adapter does not support hot-swap of CF cards, so please turn off power when changing cards..
Check Stock

Gigabyte GA-H77N-WIFI - LGA1155 Intel H77 Chipset Mini-ITX Motherboard DDR3 SATA 6Gb/s DVI/HDMI PCIE Gigabit LAN 7.1CH HD Audio USB3.0

  • ...e Intel B75 series, and the motherboard has integrated 6-channel sound card and RTL8105E network card chip..
  • 【Model & Memory & Interface】The CPU socket is LGA1155, and the CPU type supports i3, i5 and i7 series. The maximum memory supports two 8G memory, memory type DDR3 1066/1333/1600MHz desktop memory. The I/O connector has 1 USB keyboard and mouse universal interface, 1 RJ45 network interface, 1 audio interface, 2 USB2.0 interfaces and 2 USB3.0 interfaces..
  • 【Multiple expansion slots】The expansion slot includes 1 PCI-E×16 graphics card slot, 1 PCI-E×1 slot, 2 USB2.0 slots (1 group), 2 USB3.0 slots (1 group) ), 3 SATA2.0 interfaces and 1 SATA3.0 interface..
  • 【High-performance】It adopts 3 power supply modes, the power interface is a 4-pin and a 24-pin power interface, the SATA3.0 high-speed hard disk interface is adopted, and the SSD solid state hard disk high-speed transmission is supported. Core display HDMI high-definition graphics card, support VGA+HDMI dual output..
  • 【Please Note】It is best to be installed by professionals. When the motherboard is normally installed, there is no display, no boot, no picture, no network card, no sound card, etc., it is recommended that the customer restore the factory settings or find an eraser to wip....
Check Stock

SD Card Reader 7 in 1 SD Micro SD MS M2 Memory Card Adapter with 3 USB 2.0 Ports, 480 Mbps Read Write for SD SDHC SDXC Micro SD/TF MS M2 Cards for Windows Laptop MacBook and PC (USB-A)

  • ...s and 3 USB 2.0 ports. Helps you to avoid the hassle of carrying many card readers and allows you to easily transfer photos, music, data with a single Digital Memory Card Reader. *Note: This Multiple card reader can read only one Memory Card at a time but can operate all the 3 USB ports simultaneously..
  • Type-A cable connector: 4-slot card reader Combo Adapter comes with a USB Type A cable connector. Compatible with MacBooks, laptops, PCs, smart phones, tablets and many more devices having a USB C port..
  • USB 2.0 Port with OTG Support: Multi-Card Reader has hot swappable USB ports that support many USB peripherals with USB 2.0 and OTG. It is backward compatible with USB1.1 Note: Supports memory devices with maximum 2TB and does not support USB devices over 900mA current..
  • Technical Superiority: Digital Camera Reader Adapter is low energy consuming, portable, multifunctional plug and play multi-card reader. It is bus-powered and so no need for external power supply. The attached connector cable can be fitted seamlessly back into the body to fit ergonomically in your palm or pocket. Its built for universal compatibility for Windows, Mac, Android and Linux OS..
  • Safety First & 18-Month Warranty: 7 IN 1 Digital Memory Card Reader comes with a 30-day return....
Check Stock

Vanja USB Type C SD Card Reader USB 3.0 Micro SD Card Reader Adapter Used for SD-3C SD Micro SD TF SDXC SDHC MMC RS-MMC Micro SDXC Micro SDHC UHS-I

  • [Phone & PC Supported]: Vanja USB C Card Reader offers you easy connection between flash memory card and a USB-A/USB-C/Thunderbolt 3 enabled....
  • [Super Speed & High Capacity]: Vanja USB Memory Card Reader compatible with SD/Micro SD card up to 128G and allows super fast data transfer up to....
  • [More Easily Read Most Memory Cards]: This USB Card Reader for SD-3C SD Cards, Micro SD Cards slots and USB A 3.0/USB C connector, it can easily read....
  • [Universal Compatibility]: The USB 3.0 A connector works with all desktops/laptops/PS4/Xbox One/Smart TV of USB A port. The USB-C connector is....
  • [Compact & Travel-Friendly]: Small enough for fieldwork, the card reader/writer features a compact design that makes it easy to take with you wherever....
Check Stock

SD SDHC SDXC MMC to 3.5' 40Pin Male IDE Adapter Card SD Memory Card to IDE Hard Disk Drive Adapter

  • SD to 3.5" 40Pin IDE Adapter,Convert SD, SDHC, MMC to an IDE-compatible hard drive.Support PIO, multi-word DMA and super DMA data transmission mode. high-temperature resistance, stable performance, permanent and effective data storage, no noise, no seek error.Ideal for some devices that required a fast and easy bootable device such as POS..
  • Enables IT engineers and embedded technology enthusiasts to use SD/MMC card as a normal IDE 3.5" hard disk.Provides an alternative for data storage and transfer or test for mainboard, sound card, display card and memory card, etc..
  • Compatible with SD Memory Card specification 1.1, MMC specification 2.0, SDHC Memory Card. SD socket support maximum 32GB SDHC card Support PIO, Multi-Word DMA and Ultra DMA data transfer mode. Compatible with DOS, Windows 98SE, Me, 2000, XP and Vista & Linux. Bootable, install OS and application on SD card..
  • Easy installation and no driver required.Mini board design and no space wasted. Ompatible with MMC system specification 2.0 , SD Memory Card specification 1.0, SDHC Memory Card..
  • Attention: Some of the mother board required to enable LBA mode and disable DMA transfer mode..
Check Stock

Bewinner Cooling Fan for Cooling Video Cards Mini System PCI Slot Blower CPU Case DC Cooling Fan New Cooling Fans PCI for Computer

  • ...o fan rotates to suck the waste heat stuck near the board, and then quickly dissipates heat through the I/O panel on the side, which can directly accelerate the temperature adjustment around the board..
  • 【Double Plug Design】This computer cooling fan has a large 4P power connector with two sets of plugs, which can be directly connected to the power socket of the chassis, and the dual-plug design can provide another connector when using one power connector, which does not occupy limited power interface..
  • 【A Variety Of Functions】Our chassis cooling fan is compact and versatile. It can cool the processor and memory and can also be used to cool the graphics card. Moreover, since the general chassis has 7 PCI slots, you don't have to worry about installing a heat sink, and it is easy to install and maintain..
  • 【Efficient Heat Dissipation】Our PCI cooling fan has high air volume and high static pressure. High-quality heat dissipation performance. It can be installed in almost all expansion slots and direct airflow to PCI fans that require more functions..
Check Stock

KALEFO Memory Table Signs for Funeral Place Share Your Special Memories Cardboard Sign Here Memorial Celebration of Life Set of 2

  • MEMORY TABLE SIGN - Our condolences to you on the loss of your loved one. Memory tables allow you to capture special memories of your loved one..
  • SET OF 2 CARD SIGNS - These black cardboard signs are ideal for placing on a memory table at a funeral or celebration of life to gently encourage....
  • SIGN 1 - 'PLEASE SHARE YOUR SPECIAL MEMORIES HERE' - a rigid card sign with fold-out stand. It features text' in white on a black card board effect....
  • SIGN 2 - 'MEMORY TABLE' - a folded card tent sign with white text on a black card board effect background. Size: approx 4 inches tall x 9 inches wide..
  • If there any questions or are not satisfied with our product, please feel free to contact us firstly by email, we will help you out promptly and....
Check Stock

AITIAO 2Pcs SD Card to 2.5 Inch IDE Adapter SD SDHC SDXC MMC Memory Card Converter TF Memory Card to IDE 44Pin Male Adapter to Laptop HDD for DOS/Linux/Windows 98SE, Me, 2000, XP and for Vista.

  • The SD Card to 2.5 Inch IDE Adapter Adapt SD/MMC flash memory card to a super compact, SD card has the characteristics of small size, large capacity, anti-seismic and moisture-proof, high-temperature resistance, stable performance, permanent and effective data storage, no noise, no seek error..
  • Enables IT engineers and embedded technology enthusiasts to use SD/MMC card as a normal IDE 2.5" hard disk.Provides an alternative for data storage and transfer or test for motherboard, sound/audio/memory card, etc..
  • Ideal for some devices that required a fast and easy bootable device such as POS. Be a SD/MMC card reader/writer.Compatible with SD, SDHC, SDXC & MMC specification.One 2.5" IDE hard disk driver 44pin male connector and one standard SD socket..
  • IDE Adapter supports PIO, Multi-Word DMA and Ultra DMA data transfer mode.Supports boot function.No external power required and powered from IDE interface.Easy installation and no driver required.Mini board design and no space wasted.Dimensions: 36mm x 52mm..
  • Attention: This SD Card to 2.5 Inch IDE Adapter does not support hot-swap of CF cards, so please turn off power when changing cards..
Check Stock

WSDMAVIS 1 Pcs SD Card to IDE Adapter 2.5 Inch 44Pin Male Adapter SD SDHC SDXC MMC Memory Card Converter to Laptop HDD

  • Use this product to convert SD card into 2.5inch 44pin IDE interface.There are two main control chips on this board, and there is an SD card socket on the back..
  • Compliance with SD specification Ver2.0, IDE/ATA-33 specification.Standard IDE interface interface: true-IDE mode, and supports DMA-33 transfer mode.
  • The IDE interface is a 44-pin/2.0mm male connector..
  • The SD card can become an OS and application software that can directly start the device.
  • Support DMA and ULTRA DMA mode, suitable for DOS, NT4, WINDOWS98SE, ME, 2000, XP, VISTA, MAC, Linux systems..
  • Installation method:First install the SD card into the product slot, and then connect the hard drive data cable to the interface of the notebook hard drive. It can be operated and used after the power-on test is normal..
  • Note: for soft routing, the size of the SD card should be within 1G. For example, if WIN98, WIN ME, WINXP, and the system are installed, the SD card capacity should be more than 2GB. If you require high speed, please choose a high-multiplier flash memory card.Maximum support 128G SD card..
Check Stock

SparkFun IoT RedBoard - ESP32 Development Board -ESP32 WROOM MCU Module USB-C Connector Qwiic Connector MicroSD Card -ESP32 Dimensions: 2.3in x 2.7in x 1.08in

  • The IoT RedBoard is an ESP32 WROOM-equipped development board that has everything you need in an Uno with extra perks like USB-C, Qwiic, and more..
  • IoT RedBoard Features: CPU and On­Chip Memory. ESP32-D0WD-V3 embedded, Xtensa dual-core 32-bit LX6 microprocessor, up to 240MHz. 448KB ROM. 520KB SRAM. 16KB SRAM in RTC.
  • Also Features: Wi­Fi, 802.11b/g/n. Bit rate: 802.11n up to 150Mbps. A-MPDU and A-MSDU aggregation. 0.4µs guard interval support. Center frequency range of operating channel: 2412 ~ 2484MHz..
  • We've included 3.3V voltage translation and a Qwiic connector to the edge of the board to allow for quick and seamless connection to our ever-growing line of I2C based Qwiic products. The board even includes a microSD socket if your application requires you to log and save data to a memory card..
  • The IoT RedBoard can target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming, and MP3 decoding..
Check Stock

MP3 USB Flash Drive Micro SD TF Card Player Lossless Decoder Amplifier Board Module by Envistia Mall

  • Use this DIY MP3 player/audio decoder module to build your own MP3 player, Boom Box or portable audio player..
  • Connect directly to headphones, or pair the stereo output of this player with an audio amplifier board to power your speakers..
  • Plays MP3 audio files on a TF (MicroSD) card (the memory card used in cell phones), or a USB drive in U disk playback mode..
  • 3.5mm headphone jack to connect headphones or to an external stereo amplifier. Onboard 2W mono amplifier to directly connect a speaker (single channel....
  • Can be powered with standard 5V USB power (a USB power supply or power bank) through the Micro USB power connector. Can also be powered by a 3.7V to....
Check Stock