Categories

Best Metal 3d Printer Filament

Official Creality 3D Extruder Feeder Drive MK-8 Aluminum Upgraded 1.75mm for CR-10 Ender 3 CR-10S (Black)

  • 【Upgrade Black Extruder】All Metal MK-8 Extruder Feeder Drive 1.75mm Filament. It makes loading the filament easier and smoother, with no worries about filament scraping or breaking. This extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware..
  • 【Wide Application】The upgrade Creality3D silver metal Bowden extruder is compatible with nearly all models of 3D printers(Ender 3/3 Pro, Ender 3 V2, Ender 3 Max, Ender 5/5 Plus/5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR-10 S5, CR-10S, CR-10 Plus, CR-X, CR 20/20 Pro). No need to change stepper motors or other mounting hardware..
  • 【Very Easy to Install】 Unbolt the old original Creality plastic extruder & screw in the new Metal Extruder and ready to start printing. Our metal extruder kit comes with an instruction on how to put it together, which makes it easier to install. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame.
  • 【Durable】 All-metal aluminum alloy, DIY aluminum block and you need to be assembled by yourself. Giving a much smoother travel and print quality. Fits a 1.75mm filament..
  • 【Official Creality Original Quality】This high-quality all-aluminum construction is guaranteed to last for years,....
Check Stock

3Dman Filament Spool Holder Bracket for Material TPU/PLA/ABS/Nylon/Wood 0.5KG 1KG for 3D Printer

  • 【Material】The 3D printer filament holder is made of high quality metal and plastic, sturdy and durable, long service life. Fine workmanship, small size, easy to carry and store..
  • 【Easy Installation】1 x 3D printer filament holder, 2 x M4 T-nuts, 2 x M4x6mm screws. Filament installation is easy and fast, using 2 M4 screws to fix, stable and not loose..
  • 【Convenient and durable】60° tilt angle for smoother feeding. Stand reinforced design, hard strength, durable..
  • 【Widely used】Suitable for 0.5kg or 1kg and below TPU/PLA/ABS/Nylon/Wood 1.75mm 3.0mm 3D printer consumables..
  • 【Application Scope】 Suit for 2020, 2040 aluminum frame type 3D printer, Ender 3 series, CR-10 series..
Check Stock

TPU Flexible Short Range Extruder with Eccentric Wheel Flexion Retrofit Extruder Kit for 3D Printers TPU Prints

  • Compatible with Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer. Supporting all 1.75mm diameter filament especially for flexible filament such as TPU, PLA and other flexible filaments..
  • Easy to Install and Use - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a complete extrusion kit. With longer Extruder motor connecting cable, tools, accessories, and wiring diagram instruction for installation, easy to assemble..
  • Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament..
  • Integrated All Metal Hotend - It's sturdy and wear-resistant with an all-metal shell and surface oxidation treatment.
  • an Integrated structure is convenient for wiring and replacing..
  • 3D Printer Direct Extruder Upgrade kit Easy Print TPU Flexible Filament.
Check Stock

Zeberoxyz 3D Filament Rack Spool Holder Bracket Used for Material TPU/PLA/ABS/Nylon/Wood 0.5KG 1KG for 3D Printer CR-10 (Spool)

  • 3D Printer filament holder Material:High Quality Metal and Plastic, long service life, fine workmanship.
  • Filament Holder Install:Easy and quick installation, Use 2pcs M4 screws to fix, stable and not loose.
  • Suitable for 0.5kg or 1kg and below ABS/PLA 1.75mm 3.0mm 3D printer filament.
  • The 60° inclination angle design of the filament frame provides smoother feeding, Bracket reinforcement design, good strength and durability.
  • Application Scope: Suit for 2020, 2040 aluminum frame type 3D printer, Ender 3 series, CR-10 series.
Check Stock

CDMZJJ PLA 3D Printer Filament, 1.75mm 3D Printing Consumables Bundle 1KG/2.2lb, 0.25KG/Spool 4 Colors Pack - Black, Blue, White, Red

  • 4 in 1 Bundle 3D Printer Filament: Comes with 1KG/2.2lb 3D printer filament with 4 most popular colors: blue, black, white, red. 4 spools in one package, packed in vacuum sealed bag, each spool filament net weight is 0.25KG/0.55lb..
  • Dimensional Accuracy & Consistency: PLA 3D Printer Filament, 1.75mm in diameter, Minimum demission tolerance +/- 0.02mm to ensure consistent feeding and smooth printing..
  • Premium PLA Filament: Eco-friendly and low odor, tangle-free, clog-free, bubble-free, melt well and feed smoothly, perfect 3D Printer PLA filament for smooth and stable 3D printing experience, provides excellent surface finish of printed parts..
  • Wide Compatibility: 1.75mm diameter printing filament, works perfectly with diverse 3D printers and 3D printing pens that use 1.75mm filament on the market..
  • 3D Printer PLA Filament Using Tips: Recommended printing temperature: 200?-230?. Recommended printing speed: 50-100mm/s for better printing results..
Check Stock

AMOLEN 3D Printer Filament Bundle, PLA Filament 1.75mm Bundle, Matte Black,White,Olive Green,Navy Blue PLA Filament, 3D Printing Filament Bundle, 200g X 4 Spools Pack

  • 【4 COLORS MATTE PLA FILAMENT BUNDLES 】- Package come with 4 colors Matte Black, Matte White, Matte Olive Green, Matte Navy Blue. High quality frosted texture PLA filament without glossy plastic appearance, no gloss, more detail and easy to print. Multicolor Filament Bundles meet your everyday needs in design and prototyping..
  • 【PREMIER MATERIAL 】- 3D Printer Filament matte PLA Bundle 1.75mm Raw materials are from USA, good performance. High quality PLA matte filament has smooth appearance, good shaping, no bubble, no jamming, no warping, no gloss,more detail and easy to print..
  • 【PRINT SMOOTHLY & CLOG-FREE】 - AMOLEN engineered its Professional 3D Printer filament to strict tolerances and the highest quality standards, ensuring trouble-free operation with your 3D printer and superior results. Good shaping, no bubble, no jamming, no warping..
  • 【HIGH COMPATIBILITY】 - AMOLEN 3D PLA Filament Bundles perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D,3Doodler, 1.75mm PLA filament consistent diameter, dimensional accuracy +/- 0.03mm..
  • 【VACUUM BAG & HASSLE FREE】 - Vacuum packaging with desiccant to keep it dry and keep out dust, enable Matte PLA filament much smoo....
Check Stock

Black Bearing Design 3D Printer Filament Spool Holder Fits All Spools of Any Size and All Filament Types for Pla/abs/TPU/Other 3D Printing Materials

  • What's contained: you will get 1 set black 3D printer spool holders, include 2 pieces separated holders, compatible with PLA/ABS/TPU/Other 3D printing materials..
  • Smooth bearings design: filament spool holder adopt the latest technology, the silicone anti-slip mats has better adhesion than before and the holders are not easy to slip.
  • The filament spool holder bearings are covered with a ring to prevent the bearings from becoming stuck due to oxidation, and the bearing runs smoothly, reduces all drag on your 3D printer filament..
  • Easy to use: the filament roller is a pre-assembled holder, no tools needed, easy installation and quick installation, the bearings may be a bit stiff when you first use, please lubricate a little more and they will run well..
  • Strong and quality: the 3D printing spool holder made of quality metal and plastic, stable and reliable, the size is approx. 168 x 24 x 35 mm/ 6.61 x 0.94 x 1.37 inches (L x W x H), you can use it safely..
  • Wide applicable: adopting quality material which creates a consistent flowing spool that reduces all drag on your 3D printer filament, the separated holder fits all spools of any size and all filament types, the most common works well with 1 kg and 1.75 mm PLA filament spools..
Check Stock

3D Printer Filament Spool Holder Filament Holder Fits All Spools of Any Size and All Filament Types for Pla/abs/TPU/Other 3D Printing Materials (1 Set)

  • What's contained: you will get 1 set black 3D printer spool holders, 2 pieces separated holders, compatible with PLA/ABS/TPU/Other 3D printing materials.
  • Smooth bearings design: filament spool holder adopt the latest technology, the silicone anti-slip mats has better adhesion than before and the holders are not easy to slip.
  • The filament spool holder bearings are covered with a ring to prevent the bearings from becoming stuck due to oxidation, and the bearing runs smoothly, reduces all drag on your 3D printer filament.
  • Easy to use: the filament roller is a pre-assembled holder, no tools needed, easy installation and quick installation, the bearings may be a bit stiff when you first use, please lubricate a little more and they will run well.
  • Strong and quality: the 3D printing spool holder made of quality metal and plastic, stable and reliable, the size is approx. 168 x 24 x 35 mm/ 6.61 x 0.94 x 1.37 inches (L x W x H), you can use it safely.
  • Wide applicable: adopting quality material which creates a consistent flowing spool that reduces all drag on your 3D printer filament, the separated holder fits all spools of any size and all filament types, the most common works well with 1 kg and 1.75 mm PLA filament spools.
Check Stock

SUNLU Silk Rainbow Filament, Shiny Multicolor Gradient PLA+ Filament 1.75mm, 1kg(2.2lbs)/Spool 3D Filament for 3D Printer & 3D Pen, Shiny Silk Rinbow Ⅰ

  • 【SUNLU Silk Rainbow 3D Filament 1.75mm】 Every color changes every 15-18 meters. The change from one color to another is random. Gradually multicolors make your print works more eye-catching and unique..
  • 【Shiny Multicolor Silk PLA+ filament 】Silk PLA+ printer filament is shiner than standard PLA. No need extra polishing, printing at a high gloss guarantee a more beautiful finish , it has a similar sheen as metal..
  • 【Easy To Use】 SUNLU 3D printer filament keeps improving the printing performance, Silk rainbow Ⅰ is easier to print smoothly, adhere to the printing platform, and it has less warping, less stringing..
  • 【No Ordor & No Clog & No Bubble】Designed and Manufactured with Clog-Free patent to guarantee a smooth and stable printing experience.
  • Complete drying for 24 hours before vacuum aluminum foil packaging to effectively protect the Silk 3D filament from moisture..
  • 【All Lifetime Warranty | Rainbow PLA, PLA+, ABS, PETG, TPU, Wood, Carbon Fiber】Fast and effective 24 x 7 professional customer support providing technical solution. If SUNLU 3D Printer filament 1.75mm have any problem, please send email to us..
Check Stock

Zeberoxyz 3D Printer Filament Holder with Adjustable 26-126mm Filament Mount Rack Bracket Fits for TPU/PLA/ABS/Nylon 0.5-3KG 3D Printing Material(Holder for 0.5-3kg Filament)

  • The width can be adjusted (about 26mm-126mm/1.02inch-4.96inch) to adapt to different filament reels.
  • The range of the material rack can be adjusted according to the size of its filament, which is more flexible.
  • Material: 3D Printer Filament Holder made of high quality Metal and Plastic, stable, durable, fine workmanship.
  • Stable and durable foot pads increase stability and prevent the bracket from moving during work.
  • The material draws and slides smoothly to avoid jamming and winding of the spool.
  • Widely Used for 0.5KG 1KG 3KG PLA ABS 1.75mm 3.0mm all 3d printer filament.
  • Package Content: 1Kit 3D Printer Filament Holder, 2PCS M4 T-nuts, 2PCS M4x6mm Screws, 1PCS Allen Key.
  • The Filament in the image are only used with the photo scene, the actual shipping products do not contain Filament, please note, thank you.
Check Stock

AMOLEN PLA Filament 1.75mm 3D Printer Filament, Silk PLA Filament Multicolor 1.75mm, 20% Real Metal Silk Rainbow 3D Printing Filament 1 kg

  • 【Real Metal & Multicolor Change】There are 20% Real Metal particles in AMOLEN Silk Metal Rainbow filament. With Rose Gold,Bronze Metal,Champagne Metallic and Electrum Green Gold,the silk mental rainbow pla filament has outstanding silky glossy smooth appearance..
  • 【High Compatibility】Perfectly compatible with most of the FDM 3d printer on Market, 1.75mm pla filament with high diameter tolerance, dimensional accuracy +/- 0.03mm. Stable diameter accuracy offer you a smoothly feeding experience..
  • 【Premium Quality】Good shaping, strong toughness, no bubble, no jamming, no warping, melt well, feed smoothly and constantly without clogging the nozzle or extruder. Amolen filament, which have premium quality, print Much More Smoothly..
  • 【Professional Packaging】Vacuum packaging with desiccant to keep the 3D Printer filament dry and keep out dust and foreign particles..
  • 【Hassle free】One-month free trial, 30 days Money-back if you’re not satisfied..
Check Stock

Haosegd 5 Colors PLA Filament 3D Printing Filament 1.75MM 250G 3D Printer PLA Filament 1250G in Total No Clogging & Bubbles Neat Winding High Precision Art Toy Cars Model

  • 3D Printing Filament Temperature: The nozzle temperature setting for printing with PLA is 190-210 degree. Our engineers recommend starters set 200 degree of printer nozzle and 55 degree of hot bed for getting excellent printing effect..
  • 3D Printer Filament Neat Winding: This pla filament has undergone strict manual inspection to ensure that the PLA filaments are neat and easy to feed and suitable for most 3D printers on the market..
  • 1.75MM PLA Filament Application: The PLA 3D printer filament bundles are used in 3D printers,which can be used to print medical skeletons, games, flower decorations, animal toy models, art decorations and practical tools etc..
  • 3D Printer Filament First Choice：The pla filament is very safe and only has a small odor. It has strong layer adhesion, good melt and smooth feeding. It is your first choice whether considering safety factors or practical aspects..
  • 3D Printer Filament Bundle Multiple colors: The colors of this combination are diverse and beautiful. There are five color-White, Black, blue, Purple and Red, included in the package. You can use them to print models with different colors..
Check Stock

AMOLEN Real Wood 3D Printer Filament Bundle, PLA Filament 1.75mm Bundle, Dark Walnut Wood,Bamboo Wood,Red Wood,Ebony/Black Wood, 3D Printing Filament Bundles, 200g x 4 Spools

  • 【Wood PLA Filament Bundles】 - Package include 4 wood filaments, Dark Walnut Wood PLA Filament 1.75mm, Bamboo Wood,Red Wood,Ebony/Black Wood, 3D Printer PLA filament Bundles, 200g each spool with woody touch, dimensional:1.75mm,accuracy+/-0.02mm..
  • 【Premium Quality Wood Filament 】- Dark Walnut Real Wood PLA Filament, red wood and ebony wood are made of PLA and contains 20% natural wood powder, the light color wood has 20% bambbo Fiber, prints with wood-like surface of wood color and texture. The print even smells like wood. Ideal for print flower pots for growing succulents or flower, or print tree, groot or other wood-like models..
  • 【High Compatibility】 - AMOLEN 3D Printer Filament is Perfectly compatible with 99% FDM 3D Printer and 3D Pen, MakerBot, LulzBot, FlashForge, UP, Printrbot, Solidoodle, Reprap, Mendel, MakerGear, ANYCUBIC, Creality 3D, SUNLU, ERYONE,MYNT3D, 3Doodler..
  • 【Vacuum Sealed Packing 】- Wood PLA Filament bundles come with desiccant to keep it dry and keep out dust, a reusable bag with sealing strip, 3D Printer Filament can be put back into bag after used. The transparent plate makes it easier for you to check the filament color and the remaining filament..
  • 【100% After Sales Service 】- AMOLEN provide professional 3D pri....
Check Stock