Categories

Best Metal Arc Gouging Electrode

E6013 - General Purpose/Mild Steel - Welding Electrode/Rod - 14" x 1/8" (PACK: 44 LB)

  • All-position, mild steel electrode for welding light to medium-gauge steel. Common uses include tack welding on thin sheet metal such as galvanized sheets, automobile bodies, metal furniture, window frames, fences, storage tanks, farm equipment and iron grills.
  • Excellent operating characteristics when using small diameter electrodes to weld thin sheet metal using lower open-circuit AC voltage.
  • One of the easiest electrodes to use because of its easy slag control in vertical down welding, its wide operating range and restrike capabilities.
  • This electrode has a soft, steady and quiet arc that produces very little smoke or spatter.
  • Select your Electrode Diameter and Package Quantity from the Options - Check Picture #3 for Welding Parameters..
Check Stock

WeldingCity 5-Lb Stick Welding Electrode Rods E6013 1/8\ (3.2mm) Carbon Steel | Pack of 5-lb

  • PRODUCT: premium shielded manual metal arc-welding (SMAW) electrode E6013 for stick welding carbon steel welding in metal fabrication, maintenance and repair works..
  • SPECIFICATION: AWS A5.1 ASME SFA 5.1/E6013. 60,000 psi min. yield strength. Core rod diameters and electrode lengths: 1/8" x 14" and 3/32" x 12". Typical deposited chemical composition (wt%): C=0.08, Mn=0.50, Si=0.40, P=0.015, S=0.012, Fe-balance..
  • FEATURES AND APPLICATIONS: Runs on AC or DCEP (reverse) polarity or DCEN (straight) polarity. Light to medium penetrating. Easy steady arc with excellent wetting and ease of operation. Smooth and flat beads with low spatter. Easy slag removal. For sheet metal, irregular short welds that change positions. Good for general, all-purpose applications and joints with poor fit-up. All-position welding..
  • PACKAGE: pack of 5-lb and 10-lb. With volume discount. Buy More Save More!.
  • U.S. based welding supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

A Dark Heart (Elders and Welders Chronicles Book 2)

  • ️【★TIG&ARC Strong Point】High Frequency Start TIG,Non-Contact Arc Initiation That Reduces Tungsten And Material Consumption.Rated Input Frequency 50/60Hz, Duty Cycle 85%，Improves The Performance Of The Welding Machine..
  • ️【★Feature】TIG/ARC 2-in-1,Tig& ARC Welder With Tig Torch, Earth Clamp, Electrode Holder,Welding Tong.
  • ️【★Portable And Powerful】TIG Welding Thickness 0.3-4.8mm,Stainless Steel, Alloy Steel, Mild Steel, Copper, Cast Iron And Chrome.ARC Welding Thickness 15-42mm.
  • ️【★Energy Saving】Portable Handle Makes It Easier To Operate, The Lightweight Makes It More Convenient To Carry.Suitable For Stainless Steel, Alloy Steel, Carbon Steel, Copper, Copper Alloy And Other Non-ferrous Metal Welding.
  • ️Automatic Compensation For Voltage Fluctuation, Over-voltage Protection, Under Voltage Protection, Over Current Protection, Over Load Protection.
Check Stock

Welding Arc Welding Electrode Holders 300Amp Copper Heavy Duty Jaw Welding Rod Holder Plier Clamp of Welding Machine Materials for Arc MMA/Stick, Black

  • Great for most Arc, MMA, Hand Stick welding jobs.
  • Arc welding electrode holders with a comfortable insulated handle and easy to operate..
  • Used # 1 AWG Gauge Cable,The electrode holder is with highly conductivity and improved cable connections..
  • High quality electrode holder is with highly conductivity and improved cable connections..
  • Electrode holder is made of High Quality Brass material with Insulated Handle. Special Design for Easy Cable Connection with Free Spanner and Spacing Sheet..
Check Stock

SSIMDER Stick Welder Machine Mini ARC Welder 200A 110v/220v Hot Start ARC Force Anti-Stick Portable ARC TIG Welding Machine With Smart LCD IGBT

  • ...input voltage, the real current is 200A. This mini welding machine weighs only 5 lbs, it's lightweight and portable so you can take it anywhere for welding..
  • 【Intelligent LCD Digital Display】 This ARC-200S stick welder machine has an intelligent LCD digital screen, which displays the recommended size of the electrode while adjusting the current. This stick welder includes ARC mode, hot start function, arc force and TIG mode, you can switch to different modes and adjust accordingly. Great for beginners..
  • 【Adjustable Hot Start and Arc Force】 The ARC-200S ARC Welder comes with Adjustable Hot Start Function, which helps to improve the reliability of ARC Striking and Reduce the Spatter while Welding. The ARC Force Function on this ARC Welder can adjust resistance of ARC to Minimize electrode sticking..
  • 【ARC & Lift TIG 2 in 1 Function】This ARC-200S is also an ARC & Lift TIG 2 in 1 welder, which can be used as ARC/MMA stick welder or Lift TIG welder. (TIG torch and consumables need separate buy)..
  • 【What’s more】SSIMDER is a professional welding machine manufacturer, we aim to provide a better welding tool and make welding easier. If you have any questions, please feel free to contact us..
Check Stock

600A Arcair Carbon Arc Gouging Torch Arc Welding Equipment Welding Accessories Heavy Duty Industrial Grade Torch with Cables Grooves Machining Tool

  • 【PRINCIPLE OF ACTION】The carbon arc gouging is a method of surface grooves machining which adopts carbon rods or graphite rods as electrodes to generate arcs with the workpiece and melt the metal, finally blowing the molten metal off with compressed air.
  • 【TURN AT ANY ANGLE】The gun head can be rotated at any angle, suitable for various specifications of carbon rods.The product can operate in any position with great flexiblity.It has good accessibility, it’s easy and convenient to operate.
  • 【ROTATABLE TAIL】The tail air pipe and the adapter can be rotated, which is convenient for application and simpler operation.High-quality cable hose provides high heat resistance and abrasion resistance.
  • 【ONE-KEY VALVE DESIGN】One-button air valve is designed in the middle of the handle, which is easier to operate with the handle.It’s mainly used to dig the groove, clear weld defects, and remove weld root.
  • 【HIGH ACCURACY】When clearing weld defects, the shape and depth of the flaw can be clearly observed under the arc.It’s high in precision and efficiency.It can reducing the labor intensity.
Check Stock

Lotos CP243 Extended Plasma Cutting Torch for RED Color LTP5000D with 3-Prong Switch Connector 24 ft

  • 24Ft long pilot arc plasma cutting torch plasma cutting torch for RED Color LTP5000D.
  • NOT Compatible with BROWN Color LTP5000D.
  • One set of consumables is installed (1 nozzle, 1 electrode, 1Cup).
  • The compatible consumables for this torch are Loots PCON 20, PCON40, PCON90..
  • Can only be used for LOTOS pilot arc plasma cutter LTP5000D.
Check Stock

200A Welding Electrode Holder Clamp Style Forging Brass Materials for Arc MMA Welder,Red

  • GREAT FOR most Arc, MMA, Hand Stick welding jobs.
  • ACCEPT UP TO No. 2 welding cable.The electrode holder can hold electrodes up to 5/32 Inch.
  • CONVENIENT:The electrode holder is with a comfortable insulated handle and easy to operate with..
  • MATERIALS:Forging brass.PACKAGE:1 electrode holder included..
  • HIGH QUALITY:The electrode holder is with highly conductivity and improved cable connections..
Check Stock

STINGER Stv002 Electrode Holder Insulated

  • V Securely Holds Electrode, Ergonomic Comfortable Rubber Handle.
  • Amperage: 0 - 350, Electrode Capacity: 5 MIL / 3/16", Cable Capacity: 1/0 ga..
  • Eliminates Arc Burns From Rod "Popping" Out.
  • Molded Thermoset insulating cover set meeting the requirements of your welding projects.
  • Most Heavy Duty Welding Electrode Holder on The Market, Made In The USA.
Check Stock

GOFLAS Stick Welder 180A Welding Machine 110/220V Dual Voltage IGBT Inverter MMA Welder Machine Hot Start ARC Welder with Electrode Holder Work Clamp Input Power Adapter Cable and Brush

  • ...que IGBT control mode, which improves the reliability of the welding machine. The powerful arc force provides smoother welding and deeper penetration, and the welding current is constant, keeping the arc stable, especially when welding at low currents..
  • 【Safe and stable】This welding machine is easy to remove the electrode from the workpiece, and it is equipped with closed-loop feedback control and multiple protection functions to prevent overheating, overcurrent, overvoltage, undervoltage and short circuit damage to ensure safe operation..
  • 【Portable Design】110V/220V arc welding machine, perfect appearance, high-quality internal structure, small body, light weight, high efficiency and energy saving, easy to carry and use whether you work outdoors or indoors..
  • 【Multi-purpose】MMA welding machine is widely used, suitable for maintenance, metal fabrication, outdoor maintenance, farm, road equipment maintenance. Ideal for welding metal, alloy steel, mild steel and other metal materials..
  • 【Energy saving】The stick welding machine provides a stable current, which can effectively reduce the damage of the workpiece, the welding frequency is significantly improved, and the energy saving effect is remarkable. Great choice for home stick welding..
Check Stock

Goplus 250 AMP MMA Welder ARC Welding Machine 110V/ 220V Soldering Accessories Tools

  • 【Profession Grade ARC Stick Electrode Welder】Detailed treatment makes this welding machine highly efficient and practical. Stick electrode welding machine for MMA welding in alternating current (AC). Perfect welding performance, ideal for welding mild steel and stainless steel..
  • 【2 levels transformer】2 levels of transformer, 110V and 220V. Fit both home and professional use..
  • 【Stable and Durable】Compact construction and exquisite MMA ARC welding machine, made of heavy duty stainless steel body, painted with durable yellow paints, ensure its long-last serving life-span..
  • 【Portable Design】Features 2 easy carrying handle handles and 2 Wheels for easy access and movement during your maintenance tasks, adds extra maneuverability. Can be used anywhere u need..
  • 【Safe with A Lot of Complimentary Necessities】Build-in fan on the machine to help heat dissipation. Features with thermal overload protection to ensure safety. It also comes with a copper electrode holder, a ground clamp, a protection mask and a brush/chipping hammer..
Check Stock

Baluue TIG Welding Tungsten Electrodes Ground Finish Welding Rods Thoriated Electrodes for WP

  • lanthanated tungsten rods Multiple choices for your high-quality welding..
  • lanthanated electrode Pure Tungsten forms a clean, balled tip when heated and provide great arc stability for AC welding with a balanced wave..
  • Welding Tungsten Electrode Rod Good mechanical cutting performance, good electrical conductivity, easy operation and long service life..
  • tig tungsten Smallest electron emission, low steam pressure, low resistance and good electrical conductivity..
  • ground annealed Tungsten electrodes Pure tungsten welding electrodes also provide good arc stability for AC sine wave welding, especially on aluminum and magnesium..
Check Stock

ARCFONY Plasma Cutter Welder Machine - 50Amp CTS528XP Non-Touch Pilot Arc Plasma Cutter, 3 in 1 200Amp TIG MMA Welders, Dual Voltage 110V/220V

  • MMA Mode: 200Amp tig welder machine adopts HF arc ignition technology and has the functions of HF TIG, spot TIG and pulse TIG. The welding has little damage to the base metal and can weld thin process parts. 180Amp MMA adjustable arc current, arc welding stability. Suitable for 1.0mm to 4.0mm different acid base electrode welding..
  • Easy To Use: Plasma Cutter machine adopts IGBT inverter technology, 110/220V dual voltage automatic recognition of input current and voltage. Plasma Cutter equipped with NPT 1/4 "air regular, Duty cycle is 60%. Built-in post time, when you stop cutting, the air runs for a minute to cool the consumables of the plasma cutting torch and extending the life of consumables..
  • Safe & Portable: Built-in overload protection and fan cooling system. When the output current and machine temperature exceed the set standard, the plasma cutter will automatically power off. It can be connected to 110 or 220 volt outlets without tools and can be carried in the workshop or on the job site..
  • Package Content: 1×plasma cutter welder machine, 1×tig17V torch, 1×ag60 pilot arc cutting torch, 1×stick holder....
Check Stock