Categories

Best Metal Bond Wheel

Gorilla Tough & Wide Duct Tape, 2.88\ x 25 yd, White, (Pack of 1)

  • PERMANENT PRO RESULTS: Permanently attaches side moldings, trim and emblems to the interior and exterior of vehicles..
  • WEATHERABLE: High strength double-sided adhesive withstands weather and impact. Temperature use range is -40F to 250F..
  • EASY TO USE: Cut, apply, press. That's it. No tools required. Avoid mess of liquid adhesives..
  • SUPER CONFORMABLE: 3M VHB tape conforms to irregular and textured surfaces.
  • BOND WITHOUT RIVETS/SCREWS: Aircraft-grade adhesive strength allows for strong metal to metal bonding without rivets..DECREASE NOISE AND VIBRATION: Dampens noise, shock and vibration on your vehicle..DIFFERENT SIZES FOR YOUR PROJECT: Available in several widths and lengths and cuts easily to size.MULTI USE APPLICATIONS: Use to bond auto body, trim, side body moldings, drip rail moldings or fender and wheel trim to add instant protection against door dings and other hazards.USE ON MANY SURFACES: Bonds to plastic, metal, carbon fiber and composite parts to your vehicle's painted or unpainted surfaces.Resists moisture, UV and solvents.
Check Stock

Milwaukee 10 Pack - 4 1 2 Grinding Wheel for Grinders - Aggressive Grinding for Metal & Stainless Steel - 4-1/2 x 1/4 x 7/8-Inch | Depressed

  • 10 Milwaukee Premium 4-1/2” Depressed Grinding Wheels for Metal | 4-1/2-Inch x 1/4-Inch x 7/8-Inch | Optimized for Milwaukee 4-1/2” Angle Grinders....
  • Engineered in Brookfield WI with Premium White Brown Fused Aluminum bound proprietarily together with Makita’s exclusive Phenol Resin bond allows....
  • High-performance brown fused aluminum grain and hard bond enable these Makita wheels to consistently grind all steel and metal including welds, carbon....
  • Carefully selected Grain Grit & Wheel 1/4" Thickness provide balanced Grind Life, Stock Removal Rate, Balanced Precision, Power Demands & Heat....
  • Coarse 24 grit grains are used for rapid stock removal and are designed for hard General Steel and Welding applications | Quality Assured, Aggressive....
Check Stock

Milwaukee 5 Pack - 4 1 2 Grinding Wheel For Grinders - Aggressive Grinding For Metal & Stainless Steel - 4-1/2 x 1/4 x 7/8-Inch | Depressed

  • 5 Milwaukee Premium 4-1/2” Depressed Grinding Wheels for Metal | 4-1/2-Inch x 1/4-Inch x 7/8-Inch | Optimized for Milwaukee 4-1/2” Angle Grinders....
  • Engineered in Brookfield WI with Premium White Brown Fused Aluminum bound proprietarily together with Phenol Resin bond allows for optimal grain ware....
  • High-performance brown fused aluminum grain and hard bond enable these Makita wheels to consistently grind all steel and metal including welds, carbon....
  • Carefully selected Grain Grit & Wheel 1/4" Thickness provide balanced Grind Life, Stock Removal Rate, Balanced Precision, Power Demands & Heat....
  • Coarse 24 grit grains are used for rapid stock removal and are designed for hard General Steel and Welding applications | Quality Assured, Aggressive....
Check Stock

Norton Grinding Wheel, Premium Blue Bench and Pedestal Ceramic Alumina Bench Grinder Wheel, 6 Inch Grinding Wheel, Pack of 1

  • Norton Premium Blue Bench and Pedestal Grinder Wheels are developed with ceramic alumina and a high-performance bond that delivers fast cuts with minimal burn.
  • This bench grinder is a good choice for deburring and tool sharpening on bench and pedestal grinders with operating speeds up to 5410 RPM.
  • Versatile on multiple surfaces including stainless steel, iron, super alloys and titanium.
  • Sized as a 6 inch grinder wheel with a vitrified bond, this grinding wheel is designed to have a long wheel life.
  • Dimensions: 6 x 3/4 x 1 Inches. Comes as a pack of 1 grinding wheels.
Check Stock

Luo ke 100 Pieces Wool Felt Polishing Bits, 1/8 Inch Shank Felt Buffing Tips for Rotary Tool

  • ➥Materials: 100 Pcs wool polishing bit sets are made of high-quality Wool and shaft handle,high bond strength,coaxial good.
  • ➥Details: With 50 cylinder shaped grinding heads (diameter: 10mm/8mm/6mm/5mm/4mm).
  • 50 bullet shaped (diameter: 10mm/8mm/6mm/5mm/4mm).
  • ➥Feature: 2 kind of grinding head design meet your different need. 1/8 inch shank fits electric rotary tool, grinder, drill included dremel.
  • ➥Widly usage: Suitable for polishing metal and non-metal. such as metal, jade, various molds, glass, medical equipment, gold silver jewelry,etc.
  • ➥Package includes: 100 pieces compressed wool felt polishing wheel. Note: recommend to use with polishing compound.
Check Stock

Shark 2011 5-Inch by 0.5-Inch by 0.5-Inch Bench Seat Grinding Wheel with Grit-60

  • High performance on a multitude of materials.
  • Made of regular aluminum oxide in a vitrified bond Bench wheel is packed with telescoping bushings to accommodate popular machine spindle sizes.
  • Bench wheel is packed with telescoping bushings to accommodate popular machine spindle sizes.
  • HIGH PERFORMANCE: PFERD Bench grinding wheels offer a high dimensional stability and abrasive performance for working with a large variety of materials and for many different applications.
  • COMPATIBILITY: PFERD high-quality bench grinding wheels have been adapted to the standard bench grinders on market. Telescopic bushings for mounting on almost any bench grinder spindle are integrated.
  • UNIVERSAL TYPE: The UNIVERSAL version of the grinding wheel is ideal for general use in the workshop. Workpiece materials that can be worked are steel, cast steel, stainless steel (INOX) and cast iron.
  • LONG SERVICE LIFE: Dressing the disc on a regular basis exposes sharp grain and maintains an even grinding area. Constantly adjust the workpiece support to the wheel diameter, gap width max. 1/8”.
  • DELIVERY KIT: 1 x PFERD Bench grinding wheel | Vitrified bond | UNIVERSAL type | 6'' dia. | 1/2" thickness | 1'' bore | Flat (type 1) | Alumi....
Check Stock

ACDelco Gold 17800B Bonded Rear Drum Brake Shoe Set

  • Quality validated for proper metallurgy and correct brake plate thickness.
  • Non-directional brake surface finish for consistent braking.
  • All shoes are machined for correct shoe-to-drum contact.
  • Highest shear strength for the best bond integrity.
  • Contour or cam ground to eliminate chatter and rear wheel lockup.
  • Rust-preventative coating provides corrosion protection for superior durability.
Check Stock

SkyCo Ospho Rust Remover - 1 Gallon

  • A rust-inhibiting coating is not a paint.
  • Actually neutralizes existing rust by changing the chemical composition of rust to an inert protective barrier coating to stop future rusting..
  • Recommended for use under oil base paint or primer. One gallon of Oxy-Gone covers 600 sq. feet. It dries overnight, makes a lasting bond between rusted metal and paint. (Note: Oxy-Gone is not actually a paint.).
  • Use a wire brush or wire wheel to remove loose paint, rust scales, dirt, oil, and anything else accumulated on the surface. After doing this, apply a coat of Oxy-Gone and let it dry (overnight)..
  • Sometimes, a dry, grayish white powdery film develops. Simply brush off before painting. Oxy-Gone is water-based and ready to use..
Check Stock

The Roman Spring of Mrs. Stone

  • Made of green silicon carbide in a vitrified bond.
  • Long service life because of hard silicon carbide.
  • HIGH PERFORMANCE: PFERD Bench grinding wheels offer a high dimensional stability and abrasive performance for working with a large variety of materials and for many different applications.
  • COMPATIBILITY: PFERD high-quality bench grinding wheels have been adapted to the standard bench grinders on market. Telescopic bushings for mounting on almost any bench grinder spindle are integrated.
  • CARBIDE TYPE: CARBIDE type bench grinding wheels are used on hard materials, such as for sharpening tungsten carbide tools. Materials that can be worked are also glass or hardened, heat treated steels.
  • LONG SERVICE LIFE: Dressing the disc on a regular basis exposes sharp grain and maintains an even grinding area. Constantly adjust the workpiece support to the wheel diameter, gap width max. 1/8''.
  • DELIVERY KIT: 1 x PFERD Bench grinding wheel | Vitrified bond | CARBIDE type | 6'' dia. | 3/4" thickness | 1'' bore | Flat (type 1) | Green silicon carbide | 120 Grit | Max. RPM: 4,140 | EDP 61787.
Check Stock

Adtech W229-14ZIP50 High Temp 50ct Full Size Hot Glue Sticks, Clear

  • STRONG CRYSTAL CLEAR BOND: These hot glue sticks bond to virtually all materials including paper, metal, plastic, wood, fabric, ceramic, foam, lace, ribbon, synthetic fabric, and more..
  • FAST & STRONG BOND: AdTech Crystal Clear Glue Sticks bond to virtually all materials in as little as 30 seconds..
  • HIGH-TEMP: AdTech Crystal Clear Glue Sticks work best with high temp hot glue guns. Use high temperature glue guns to bond porous and heavier materials like glass, wood, metal, plastic, stone, ceramic, etc..
  • PERFECT FOR CRAFTING: AdTech Crystal Clear Glue Sticks are perfect to use at home, office, or school. Ideal for scrapbooking, crafting, DIY, and school projects. No harsh chemicals and acid-free..
  • FITS ALL FULL SIZE GLUE GUNS: Fits all full size hot glue guns. Contains 50 hot glue sticks in a pack. Length: 4 inches, Diameter: 0.44 inches. Made in USA..
Check Stock

E6000 230022 Medium Viscosity Auto/Industrial Adhesive, 3.7 fl oz

  • Industrial strength, non-flammable adhesive that provides versatility not found in silicones and rubber cements.
  • Safe for applications exposed to dilute acids and dilute caustics.
  • Maintains a flexible bond in cold temperatures and may be used to bond items subject to vibration.
  • Exceptional adhesion to wood, metal, glass, fiberglass, ceramics, masonry and concrete.
Check Stock

Norton Grinding Wheel 7 Inch Grinding Wheel for General Purpose Grinding and Stock Removal Pack of 1

  • This grinder wheel is a Type 01 grinding wheel made with aluminum oxide that is an ideal choice for general purpose grinder jobs as it provides a consistent performance at an economical price.
  • Developed with the most versatile vitrified bond, this grinding wheel is recommended for CNC cutting tool machines up to 3600 RPM.
  • Made from aluminum oxide to ensure longevity, this grinder wheel provides consistent balance and dimensional accuracy, ideal for toolroom applications with a light to moderate feed rate.
  • Made in the USA in ISO certified facility.
  • Wheel type is Type 01 with a 1/2 inch thickness, Dimensions: 7 x 1/2 x 1-1/4 Inches. Comes as a pack of 1 grinder wheels.
Check Stock

Oudtinx Polishing Accessories 100pcs Rubber Grinding Heads,3mm Shank Assorted Accessory, Mounted Point Wheel Head Kit for Dremel Polish Rotary Tools (Green)

  • 1. Polishing grinding wheels Choose high-quality abrasive and shaft handle,high bond strength,coaxial good.
  • 2. Abrasive cutting edge sharp edges and corners to maitain good, high durability.
  • 3. Make polished goods clean and bright, best used for various mould, glass, medical equipment, metal.
  • 4. With 50 cylinder shaped grinding heads (diameter: 10mm/8mm/6mm/5mm/4mm).
  • 50 bullet shaped (diameter: 10mm/8mm/6mm/5mm/4mm).
  • 5. Carbide tool, no dust pollution, the service life of the equivalent of several hundred with handle grinding wheel, grinding head, more than five times as much as efficiency, hardness of grinding HRC70C under all kinds of metal and nonmetal materials, easy to master, simple to use, safe and reliable.
Check Stock