Milling Cutter Bit Rotating Bit 6 Pieces Of 3-blade 90 Degree HSS Titanium Chamfering End Mill Cutter Counter Hole Deburring Cone Drill Set 6.3-20.5m Color HSS No Box

  • Material: It has the advantages of high hardness, wear resistance, good toughness and corrosion resistance. It also has stronger heat resistance, so it can maintain hardness even at high temperatures..
  • -The processed debris can be dropped more easily in the chamfering process, without affecting the work efficiency due to tool blockage..
  • -Suitable for workpieces with hardness lower than 25HRC, such as carbon steel, thin iron plate, insulating plate, PVC plate, wood board, etc. Titanium-coated models have higher hardness and longer service life.
  • -The blade can be ground: a more convenient maintenance method allows the tool to be ground without unloading..
  • -The automatic through hole chamfering knife can quickly chamfer both sides of the hole in a few seconds..
Check Stock

OCGIG 4pcs Countersink Chamfer Tool HSS 4241 Deburring Tool Set Metal Wood Drill Bits

  • Shank type: round, Sizes: 2-5mm,5-10mm, 10-15 mm, 15-20mm.
  • Ideal for cutting through metal, wood and plastic (hardness .
  • 90° angle on the point for sharp and precise countersinking, used for workpiece circular aperture chamfering or cone hole.
  • This bits should use the bench drill , it is easy to shake and it will affect the chamfering effect if you use the hand drill.
Check Stock

OCGIG 4pcs Titanium Coated Countersink Chamfer Tool Deburring Tool Set Metal Wood Drill Bits Zhongbo Business

  • Material:HSS(High Speed Steel)4241, Titanium Coated.
  • Application:Ideal for cutting through metal,wood,plastic and thin iron plate (hardness .
  • Chamfer range:2-5mm, 5-10mm, 10-15mm, 15-20mm, Shank diameter: 6mm, 8mm, 10mm, 12mm, Head diameter: 10mm, 14mm, 21mm, 28mm.
  • 90 Degree angle on the point for sharp and precise countersinking, used for workpiece circular aperture chamfering or cone hole.
  • This bits should use the bench drill , it is easy to shake and it will affect the chamfering effect if you use the hand drill.
Check Stock

Spyderco - Tri-Angle White Sharpening Stone with Ultra-Fine-Grit for Professional-Grade Finishing and Polishing - 204UF1

  • ...ening is used to re-sharpen the edges and deburr the blade, start from 400#, then repeat on 1000#..
  • Multifunctional Sharpener:Our Diamond plate honing stone can be applied to sharpening of household kitchen knives, sharpening of wood chisels, jade, high speed steel,axe, hatchet, machete,seals, seal cutting tools and chamfering of glass tiles..
  • Easy to Carry and Store:The size of the diamond sharpening stone is about 11.22 inch in length, 2.16 inch in width, and 0.79 inch in height.
  • Lightweight, compact,it's convenient to carry around for outdoor activities. The handle of whetstone knife sharpener has a hanging hole, which is convenient for storage and saves space..
  • Best Choice:WOFKNIF diamond sharpening plate can be used by everyone from stay at home moms to various professionals.A perfect portable kitchen tool gift for your family & friends. Warm tips:Do remember to wash the knife after sharpening.
  • If you need to sharpen your knife continuously for a long time, you need to sprinkle some water continuously to cool it down and prevent overheating from damaging the blade..
Check Stock

PORTER-CABLE Hand Planer, 6-Amp, 5/64-Inch (PC60THP)

  • Heavy-duty 6 amp motor of the electric hand planner provides smooth cutting in hard materials.
  • The hand planer has 16,500 rpm for smooth material removal.
  • Dual side dust extraction allows for extraction on either side of the tool.
  • Overmold depth knob with 10 positive steps allows for better planer control and multiple depth control settings.
  • 3 chamfering grooves allow for options for edge chamfering.
  • 11.5-inch cast aluminum shoe provides added control and better finish quality.
  • 5/64-inch depth of cut removes excess material in less time.
  • Overmold depth knob with 10 positive steps.
Check Stock

Carbide Chamfer Cutter, End Mills Tungsten Steel 3 Flute Chamfer End Mill 90° for Carving for Chamfering(D4*90°*50L)

  • The chamfering tool has standard size and can be used as an aluminumcopper milling cutter tool and an engraving milling cutter head..
  • The professional chamfer design can polish and engrave the workpiece without unloading..
  • The unique one-piece design makes the debris generated during the cutting process easier to fall without clogging the tool..
  • The chamfering tool is mainly used for 90° chamfering or taper hole processing on the workpiece..
  • The chamfering is designed with 3 flutes, which can complete the operation of conical surface at one time, and is suitable for small cutting amount..
Check Stock

4Pcs Diamond Knife Sharpening Stones and 1PCS Stropping Leather Strop Set, TIWEIO Diamond Whetstones with a Non-Slip Base Knife Sharpener Honing Stone for Kitchen Outdoor, #400 #600 #1000 #1200 Grit

  • ...p base is highly durable & long-lasting. And it can sharpen any blade out there, not only can used it on your pocket knives, belt-clip multi-tool, wood plane blades, chisels, etc. but also can be applied to sharpening of household any kitchen knife set, chef knife, steak knife, sontoku knife, seal cutting tools and chamfering of glass tiles so on.
  • 【Easy To Use】 Our sharpening Water stone kit is extremely user friendly. You just need to place the knife on the sharpening stone and move it back and forth several times while maintaining an angle of about 30°, finally polishing through leather honing strop. [In order to get nice results, use with water or honing oil].
Check Stock

Woodworking Edge Corner Plane Chamfer Plane for Wood Chamfering Trimming DIY Hand Tool Woodcraft Corners Edge Carpenter Gift 7 different cutter heads

  • Chamfer Cutter is made of metal with high compressive strength and ABS, high-speed steel blade, sharp cutting, wear resistance, heat resistance and....
  • 7 kinds of cutter heads can be freely matched, (1 sharp +1 round cutter, double sharp cutter, double round cutter, 1/8 round cutter, 3/16 round....
  • Used with a Wood Woodworking Edge Corner Plane, it is easy to disassemble and assemble. The telescopic part of the cutter head has a tightening nut to....
  • 7 cutter heads suitable for chamfering machine (without chamfering machine), cut out various shapes. High efficiency, small size, easy to carry,....
  • We confidently provide this product with a 180-day worry-free return warranty. So you can buy it as a gift to your father, husband, grandfather....
Check Stock

KOPO KP-5702 Manual Chamfering Machine Mini Portable Linear Pneumatic Tool Hand-Held 45 Degree Light Weight Elbow

  • This 45-degree chamfering machine has a new lightweight design, small and exquisite, and can be easily operated with one hand. Use the matching wrench to easily adjust the chamfer size and replace the blade..
  • Pneumatic chamfering machine is made of high-quality imported accessories, chamfering Machine keeps accuracy assembly with stable performance for long life..
  • It can withstand high impact and high speed, with little vibration, low resistance and lower loss. The speed is increased and the chamfer is smoother, and the machine is more durable..
  • Equipped with a 360-degree rotating exhaust port, which can quickly exhaust and reduce the temperature of the machine..
  • Pneumatic chamfering machine is entitled with high performance according to strict rule, such a power tool is made via accuracy craft by many experts..
Check Stock

Smith's DRET Diamond Retractable Sharpener, Gold

  • ...ing, which make the lubricating effect of grinding will be great.Use with no pressure.
  • Universal Application:The diamond sharpening stone is very suitable for honing household kitchen knives, wood chisels, jade, seals, tool steels, seal cutting tools, ceramic knives, and chamfering of glass tiles.Whether it is household props or outdoor tools, you can use our whetstones to sharpen it and make it easier to use..
  • Package Include:You will receive 5 pieces of diamond sharpening stones in different grits, including 400 grit, 600 grit, 800 grit, 1000 grit and 1200 grit.The size of the sharpening stone is about 15 cm/ 5.91 inches in length, 6.3 cm/ 2.48 inches in width, and 0.1 cm/ 0.04 inches in height.Lightweight, small and practical..
Check Stock

DEWALT - DWHT11131L Utility Blades, 2-Point, 3/4In L, 50 Blades

Check Stock

RIMKOLO 107-Piece Bit Socket Set,1/4

  • DURABLE S2 Material: The bit socket is made of S2 alloy steel, which is strong and has good toughness, not easy to break.The chamfering design of the head increases the contact area, not easy to wear,more durable..
  • HEAT TREATMENT CR-V: The socket base is made of chrome vanadium steel with stronger hardness after heat treated and provides higher torque.The surface is mirror chrome plated,and the E-Torx Sockets with manganese phosphate coating are more anti-corrosive and anti-rust than Black oxide coating, extending the service life..
  • CHAMFERING DESIGN: Each bits head has a unique chamfering design, which makes it easier to insert the bit head into the fastener. And increase the contact area with the fastener, reduce wear, protect the fastener.Complies with ANSI standards..
  • COMPLETE ACCESSORIES: 107PCS high quality bit socket set,including 1/4", 3/8" and 1/2"drive Torx / extra long Torx / tamper proof Torx/hex / ball end hex SAE & metric bit set. Complete accessories to meet your needs..
  • EASY TO IDENTIFYWith a storage toolbox, easy to carry. Specifications are clearly printed on the tool box and socket, which is convenient for identification and sorting, saving you time..
Check Stock

Pipe and Tubing Inner-Outer Reamer 5/16-Inch to 2-1/8-Inch Diameter Stainless Steel/PVC Pipe Chamfer Anti-Slip Aluminum Alloy Shell Deburring Tool

  • STAINLESS STEEL TUBE REAMER: trimming, chamfering and deburring the outer wall.
  • trimming, chamfering and deburring the inner wall. At the same time, the outer wall is made of aluminum alloy with anti-skid pattern..
  • APPLICABLE OBJECTS: refrigeration copper pipes, stainless steel pipes, plumbing bellows, gasoline pipelines (aluminum pipes), galvanized pipes for water engineering, etc..
  • INNER/OUTER BLADE: Multi-blade alloy steel core design, triangular scraper-the triangular support of the blade is more powerful, convenient and fast..
  • MACHINABLE RANGE: 8-54mm (5/16"-2 1/8") inner diameter/outer diameter can be used, most household pipe diameters are covered, a reamer can solve all deburring and chamfering..
  • USAGE: Rotate and cut directly by hand, or use an electric drill with an adapter for processing..
Check Stock