Categories

Best Metal Cutting Band Saws

Makita 792555-A Portable Band Saw Blade 44-7/8 x 1/2 24TPI Bi-Metal Stainless Steel

  • BI-Metal construction for up to 3x longer life than carbon blades.
  • 24 TPI configuration ideal for use cutting materials up to 1/8" thick.
  • Makes clean, quick cuts in a variety of ferrous and non ferrous metals.
  • Ideal for cutting a wide variety of materials including, rebar, pipe, all thread and channel.
  • For use with Makita corded and cordless portable band saws as well as competitor 44-7/8" portable band saws.
Check Stock

Olson Saw FB10080DB 3/16 by 0.025 by 80-Inch HEFB Band 10 TPI Regular Saw Blade

  • 3/16" Wide x 80" Long, 10 TPI, band saw blade, . 025" Thick, fits all 12" Sears Craftsman except new 91" Model, mild Scroll cutting in wood.
  • The product is easy to use and highly durable.
  • For hard or soft wood, plastic, mild steel and non-ferrous metal.
  • For all vertical, stationary, floor standing 2-wheel band saws.
  • These are heavy duty, durable, commercial grade band saw blades for industrial, woodworking, DIY and professional craftsmen.
Check Stock

Milwaukee 48-39-0572 Sub-Compact Portable Band Saw Blades, 27-Inch 18TPI, 3 Blades per Pack, 2 Pack (6 Blades Total)

  • BI-Metal construction for up to 3x longer life than carbon blades.
  • 24 TPI configuration ideal for use cutting materials up to 1/8" thick.
  • Makes clean, quick cuts in a variety of ferrous and non ferrous metals.
  • Ideal for cutting a wide variety of materials including, rebar, pipe, all thread and channel.
  • For use with Makita corded and cordless portable band saws as well as competitor 44-7/8" portable band saws.
Check Stock

Luomorgo 75mm/3 inch Hole Saw, 1 1/4 inch Cutting Depth HSS Bi-Metal Hole Cutter for Wood Cornhole Boards Plastic Drywall & Metal Sheet

  • High-Performance Materials: Hole saws made of M42 high-speed steel and BI metal, with higher hardness (≥65HRC), higher toughness, higher cutting strength and stronger wear resistance..
  • Efficient & Smooth Cutting: High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design ensures smooth and clean cutting of the hole saw blade..
  • Widely Used: Hole saws can cut 3 inch diameter holes in wood, plywood, plastic, drywall, soft plaster, cornhole boards and thin metals. In addition to punching cans or recessed lights, punching saws are also suitable for home projects on air ducts, speakers, ceiling lamps, etc..
  • Warm Prompt: Keep the drill bit in contact with the cutting surface straight at a low speed. Take some time for the saw to cut, so you can get a smooth and clean round cut.
  • 100% Risk-Free Shopping: If you are not satisfied with any Luomorgo products, we have nothing to ask and let you enjoy a full refund. Because we want our customers to enjoy a 100% satisfied shopping experience..
Check Stock

Luomorgo 100mm/4" Hole Saw, 1.4 inch Cutting Depth HSS Bi-Metal Hole Cutter for Wood Cornhole Boards Plastic Drywall & Metal Sheet

  • High-Performance Materials: Hole saws made of M42 high-speed steel and BI metal, with higher hardness (≥65HRC), higher toughness, higher cutting strength and stronger wear resistance..
  • Efficient & Smooth Cutting: High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design ensures smooth and clean cutting of the hole saw blade..
  • Widely Used: Hole saws can cut 4 inch diameter holes in wood, plywood, plastic, drywall, soft plaster, cornhole boards and thin metals. In addition to punching cans or recessed lights, punching saws are also suitable for home projects on air ducts, speakers, ceiling lamps, etc..
  • Warm Prompt: Keep the drill bit in contact with the cutting surface straight at a low speed. Take some time for the saw to cut, so you can get a smooth and clean round cut.
  • Risk-Free Shopping: If you are not satisfied with any Luomorgo products, we have nothing to ask and let you enjoy a full refund. Because we want our customers to enjoy a satisfied shopping experience..
Check Stock

Timber Wolf Bandsaw Blade 1/2\ x 93-1/2\

  • Designed for use in many standard stationary band saws..
  • Optimized tooth geometry for applications in ferrous and non-ferrous metals..
  • Bi-Metal blade construction for long life performance..
  • Precision sharpened teeth for clean, accurate cuts..
Check Stock

DEWALT Chop Saw for Cutting Metal, 14-Inch Steel Blade, Cuts 4x Faster (DW872)

  • Multi-Cutter Chop Saw offers versatility by cutting a wide variety of materials including ferrous and non-ferrous metals.
  • Utilizing a carbide-tipped blade of the metal chop saw allows the depth-of-cut to remain constant throughout blade life.
  • The metal cutting saw cuts 4-times faster than chop saws and 8-times faster than portable band saws in 2-inch x 2-inch x 1/4-inch angle iron.
  • 14-inch, 66-tooth, carbide-tipped blade delivers a lower cost-per-cut compared to cutting with abrasive wheels.
  • Specially designed carbide teeth deliver fast, precise, and virtually burr-free cuts reducing the need for preparation grinding and finished cuts that are cool to the touch.
  • Largest capacity in its class with even more capacity than a deep-cut portable band saw (5-3/16-inch round & 4-1/2-inch x 6-1/2-inch rectangular) allowing user to cut a wider variety of different size materials for more applications.
  • Ergonomically designed horizontal handle puts user's wrist in a more comfortable position to help reduce user fatigue and increase productivity.
  • 15 amp / 4 HP motor provides more overload capacity to increase performance and durability.
  • Patented, 45-degree, adjustable Quick-Fence allows for fast and accurate angle cuts without using a wrench.
Check Stock

WEN BB5651 56.5-Inch Bi-Metal Bandsaw Blade with Variable Pitch 14/18 TPI and 1/2-Inch Width

  • 56.5-inch length designed for use with the WEN 3975T and 3975 Metal-Cutting Band Saw and other similarly sized metal band saws.
  • Bi-metal blade design provides shock and heat-resistance to withstand temperatures up to 1000 degrees Fahrenheit.
  • Blade measures in at 0.5 inches in width and .025 inches in thickness.
  • Variable pitch 14/18 TPI teeth cut cleanly into metals and plastics.
  • Raker tooth pattern aids in chip removal to increase cutting efficiency.
Check Stock

Luomorgo 4.5 inch Hole Saw 1 1/4 inch Cutting Depth HSS Bi-Metal Hole Cutter for Wood Cornhole Boards Plastic Drywall & Metal Sheet

  • High-Performance Materials: Hole saws made of M42 high-speed steel and BI metal, with higher hardness (≥65HRC), higher toughness, higher cutting....
  • Efficient & Smooth Cutting: High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design....
  • Widely Used: Hole saws can cut 4-1 / 2 inch diameter holes in wood, plywood, plastic, drywall, soft plaster, cornhole boards and thin metals. In....
  • Warm Prompt: Keep the drill bit in contact with the cutting surface straight at a low speed. Take some time for the saw to cut, so you can get a....
  • 100% Risk-Free Shopping: If you are not satisfied with any Luomorgo products, we have nothing to ask and let you enjoy a full refund. Because we want....
Check Stock

BOSCH BS62-18MD 62 x 3/8 x 18T Metal Bandsaw Blade

  • Designed for use in many standard stationary band saws..
  • Optimized tooth geometry for applications in ferrous and non-ferrous metals..
  • Bi-Metal blade construction for long life performance..
  • Precision sharpened teeth for clean, accurate cuts..
Check Stock

ASTP&FH 2-3/4\ Hole Saw with Arbor Mandrel ,HSS Bi-Metal & Heavy Duty Steel Design, for Metal,Stainless Steel,Cornhole Boards,Drywall,Plastic,Brass,Aluminum,Iron and Wood（70 mm）

  • 2-3/4 inch Hole Saw made of top HSS & Bi-Metal for Heavy Dusty capability improved durability with Rust-proof. design for increased durability and outstanding cutting performance. with higher hardness , higher toughness, higher cutting strength and stronger wear resistance..
  • It is made of heat treated carbon steel alloy. Heavy Duty, Durable and Rust-proof. Built tough for repeat use and handy for working on cornhole boards and plastic.Hole saws can cut 2.5 inch diameter holes in wood, plywood, plastic, drywall, soft plaster, cornhole boards and thin metals. In addition to punching cans or recessed lights, punching saws are also suitable for home projects on air ducts, speakers, ceiling lamps, etc..
  • Upgraded design with ultra sharp serrations,Increased wall thickness of hole saw improves durability and minimizes tooth loss,Drilling with sharper Positive Rake Tooth cuts material faster than other brand.more durable with longer life than other brand hole saws..
  • High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design，With the non-binding clean edge design,ensures smooth and clean cutting of the hole saw blade.The spring on the drill would automatically pushes the disc out of the saw immediately ....
Check Stock

ASTP&FH 4-3/4 inch Hole Saw with Arbor Mandrel ,HSS Bi-Metal & Heavy Duty Steel Design, for Metal,Stainless Steel,Cornhole Boards,Drywall,Plastic,Brass,Aluminum,Iron and Wood（120mm）

  • 4-3/4 inch Hole Saw made of top HSS & Bi-Metal for Heavy Dusty capability improved durability with Rust-proof. design for increased durability and outstanding cutting performance. with higher hardness , higher toughness, higher cutting strength and stronger wear resistance..
  • It is made of heat treated carbon steel alloy. Heavy Duty, Durable and Rust-proof. Built tough for repeat use and handy for working on cornhole boards and plastic.Hole saws can cut 2.5 inch diameter holes in wood, plywood, plastic, drywall, soft plaster, cornhole boards and thin metals. In addition to punching cans or recessed lights, punching saws are also suitable for home projects on air ducts, speakers, ceiling lamps, etc..
  • Upgraded design with ultra sharp serrations,Increased wall thickness of hole saw improves durability and minimizes tooth loss,Drilling with sharper Positive Rake Tooth cuts material faster than other brand.more durable with longer life than other brand hole saws..
  • High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design，With the non-binding clean edge design,ensures smooth and clean cutting of the hole saw blade.The spring on the drill would automatically pushes the disc out of the saw immediately ....
Check Stock

FOXBC 80\ X 1/2\ X 24 TPI Bi-Metal Bandsaw Blade for Metal Cutting

  • 80-inch X 1/2-inch X 0.025 Band saw Blades for Metal Cutting.
  • Suits all bandsaws which uses 80" long, 1/2" wide bandsaw blade.
  • Perfect for soft metal, Wood, Stainless Steel, Aluminum, Brass, Plastic.
  • Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel, and tougher steels including stainless, chrome, tungsten steel, plus other problem material at slow speed. However, it's also sharp and diverse enough to handle some hard plastics and all wood based projects..
  • Perfect Fit for WEN, DeWalt, Makita, Grizzly, Bosch, POWERTEC , Shop Fox, SKIL, RIKON, Sears Craftsman, BILT HARD, Delta, Ryobi, Milwaukee band saws requiring a 80" long, 1/2" wide bandsaw blade.
  • Bi-Metal HSS M42 grade, 8% Cobalt Content For Added Durability & Wear.
  • Unique welding technique :strong and smoother welding point.
Check Stock