Categories

Best Metal Fixtures Jigs

Kreg KMS7509 4-Feet 48-Inch Mini Trak

  • Can be used to produce woodshop jigs and fixtures.
  • Great for creating taper jigs and cut-off sleds.
Check Stock

Cam Action T-Track Quick Release Hold Down Clamp for Jigs, Fixtures & Shop Fences. Ideal for Router and Drill Press Table Fences and Many Shop Built Jigs, Sleds and Fixtures (2, 1/4' Cam Action Clamp)

  • Finally, a quick release clamping system for jigs, fixtures and fences. Spending a lot of time tightening and loosening knobs on your jigs and fixtures? Or maybe your are constantly rotating knobs on your router table or drill press fences..
  • Our exclusive cam clamps will solve your problem and provide you with a quick release clamping system for all of your jigs, fixtures and some fences that rely on a track system. Having a cam clamp on your router table fence makes is so much easier to make quick adjustments and quickly lock the fence in place..
  • The clamp body is made out of aluminum, measures approximately 1-1/2” long and each clamp has a standard 3” long hex head bolt that works with most standard sizes of t-track (depending on which size Cam Action Clamp you purchase). Be sure to get the correct size for your needs. Typically that means you should check to see what size slot or track you would like to use the clamps in..
  • The Cam Action Clamps are available in ¼” 5/16” and 3/8” hex head bolt sizes. Another nice feature of the Cam Action Clamps is that you can swap the bolts out for different situations..
  • For instance, if you have a slot requiring a T-bolt, you can switch out the ¼” hex head bolt with a ¼” T-bolt. Each cam can ex....
Check Stock

Mardatt 45 Sets M4 M6 M8 Star Knobs Male Thread Clamping Knob Screw Hand Tightening Knob Quick Removal Replacement Parts with 304 Stainless Steel Hex Nuts and Flat Washers Assortment Kit

  • ...-- These star knobs have premium plastic handles, thick enough to give you a secure & comfortable grip. Besides, the long bolts are made of zinc-plated steel, hold tight, corrosion-resistant, not easy to break, ensuring long-time durability!.
  • ✽3.【Star-Shaped Handle】 --- Using these star knobs nuts as jigs, fixtures, accessories and much more. They can give you a nonslip & comfortable hand grip. At the same time, provide smooth adjustments in your various applications without being scratched..
  • ✽4.【Easy to Install】 --- Clean and accurate bolt thread makes installation easy and durable, while smooth hand knob surface provides a good appearance. Washers and hex nuts match the thread well, convenient for you to use..
  • ✽5.【Wide Application】-----This assorted while versatile set will be super useful for your woodworking, metal working and auto body shops projects! They are widely used as replacements, accessories, jigs and fixtures ect. easy to install and remove without tools, our star knobs would be a nice selection for you..
Check Stock

Kit For Build Woodworking Jigs Fixtures Tabletop | For Cutting Routing Drilling Sanding Assembling | Inline Track Clamps | Dovetail Aluminum Tracks | T-Track Accessories | T-bolts Star Knobs FullKit

  • VERSATILE - build versatile jigs, fixtures, or hold-downs, create your own clamping jigs and fixtures, such as drill press table, bench vise, corner clamp, fence clamp and more of new clamping solutions.
  • REFRESH- use our system alongside your T-track system, Ike with T tracks woodworking (T track rail or t track clamps), this kit includes all the parts to design and build any camping jigs just the way you want.
  • COMPETIBILITY- our dovetail tracks can accept t track accessories (t track clamp, like t track hold down clamp, t track stop) that uses standard 5/16'' t bolts.
  • INNOVATIVE- Revolutionary all-in-one kit includes -30⁰ dovetail aluminum tracks, T track accessories (T bolts, star knobs), inline auto-adjust clamps (dovetail clamps) and self-adhesive measuring tape. The perfect kit for woodworking as a hobby or pro.
  • HIGHLY EFFICIENT- 18’’/450mm long track and clamping capacity of the inline clamps (dovetail clamps) up to 125Lb is more than enough for your projects. The auto adjust clamps slides into dovetail sturdy aluminum tracks for fast and easy clamping. This carpentry kit will turn your woodworking projects from a headache to an enjoyable experience, while saving you time and effort!.
Check Stock

Magswitch MagSquare 400

  • An on/off magnetic work-holding square with 400 lb.
  • (182 kg) of hold force from Magswitch Technology.
  • M6 * 1 threaded holes on all sides and machined at 90° magnetic grip on 5 sides—strong on 3 sides.
  • Versatile Workholding Square. Incredibly strong fast set ups, precise positioning. Make your own fixtures..
  • Mounts anywhere with no limitations like clamps - use as a guide, stop or to secure steel.
  • Magnetic grip on 5 sides. Holds flat and round steel..
  • Machined at 90° and features pre-tapped holes on all sides for mounting tools, jigs and fixtures..
Check Stock

Asamuyu 6 Pcs 12x80 Dowel Pin 304 Stainless Steel Wood Bunk Bed Dowel Pins Shelf Pegs Support Shelves

  • Made of 304 stainless steel. Its surface is very smooth. They are rust-resistant, and corrosion-resistant.
  • Dowel Pins Size: 12 mm in diameter and 80 mm in height.
  • Dowel Pins, which is widely used on precise location.
  • It is also as dowel pins and locating elements that find wide application in press tools, jigs and fixtures.
Check Stock

Miter T-Bar for Jigs Fixtures Sleds Router Tables and General Woodworking 48 inch MADE IN THE USA

  • When building sleds, jigs or fixtures for your woodworking projects that help keep your fixtures from moving or to help your sleds and jigs slide through a track, the Miter T Bar may just be the perfect solution. The Miter T Bar does this bit fitting neatly into most standard miter slots that measure ¾” x 3/8”. The aluminum bar can be used to slide your sleds or it can be used to lock fixtures like featherboards (when cut into smaller length pieces) in place in a miter slot..
  • The T-bar is made in the USA from a solid piece of extruded aluminum and can be cut into sections and drilled as needed. Typical uses for the T-bar are fixtures like featherboards where the featherboard needs to be kept stationary to apply consistent pressure. The T-bar also works great for sleds and other sliding fixtures like cutoff sleds on a table saw or coping sleds on a router table..
  • When mounting the Miter T-Bar it is a good idea to keep in mind that the “T” on the bottom of the track is approx. 1/8” tall, which is just enough to clear the t-slot on most miter slots. If mounted directly to platform for a sled, the tabs may catch and prevent the sled from sliding freely. To remedy this, we recommend using washers between the mounted track and the platform to....
Check Stock

Accessbuy Toggle Clamp 225D 500Lbs Holding Capacity Heavy Duty Large Hold Down Clamp Quick-Release Horizontal Clamp（2Pack

  • Material: Metal, Plastic, Rubber Cushion..
  • Package Included:2 pack hold down toggle clamp with function :Oil and Stain resistant red vinyl hand grip..
  • Ideally suitable for quickly holding down circuit boards, paper, for machine operation, welding, mould, etc field..
  • Made by carbon steel with zinc plated coating for preventing corrosion..
  • Application: A rock-solid grip to install on jigs, tool fixtures, or movable bases..
Check Stock

Anodized Aluminum Miter T Track w/T-Bar Rail for Jigs Fixtures Sleds Router Tables and General Woodworking 32 inch MADE IN THE USA

  • When building sleds or fixtures, workshop tables, router table tops or any type of jig or fixture that helps hold stock in place or helps feeding stock through a cutter, miter t track will help make it so much easier. Miter T Track does this by allowing devices like miter gauges to effortlessly slide through the track for cutting applications and it can also accept fixtures with the proper hardware like featherboards to keep your stock firmly against a fence..
  • The Miter T Track has a “T” shape to it so that it can accept the discs on the ends of many miter gauges. This essentially means that your ¾” x 3/8” bar on your miter gauge will fit neatly into this track even with the disc on the end. Of course you don’t have to have a bar with the disc on the end. Wether you’re making a table top for your router, your band saw or simply building a sled, a standard ¾” x 3/8” thick bar will do the trick!.
  • The “T” shape on the Miter Track also accepts the T-bar. The T-bar has been designed to fit neatly into the miter track profile for use with jigs, fixtures or sleds. The T-bar is made from a solid piece of extruded aluminum and can be cut into sections and drilled as needed. Typical uses for the T-bar are fixtures like featherboards wher....
Check Stock

Generic Youth Dye Sublimation Heat Press Jigs - Aluminum Metal - Three Sizes (3)

  • A must have for dye sublimating socks - Get professional results. Keeps socks perfectly in place during the entire heat press process eliminating wasted inventory..
  • These high quality jigs will never warp, crack or wear out like hardboard, cardboard or wood jigs. Great for long-term use. You'll never have to replace these jigs..
  • One set comes with a total of 3 metal sock jigs - Buy multiple sets for a seamless high efficiency production runs.
  • Makes the sublimation process easy and hassle free - Clean excess dye off jigs with simple nail polish remover.
  • One 20 inches x 4.0 inches - Great for women's or Youth, One 16 inches x 3.25 inches, One Toddler/Baby Jigs - 2.5 x 10 inches. Socks in Photo not included..
Check Stock

POWERTEC 71146 Aluminum Miter T-Bar, 48-Inch, aluminum grey

  • FUNCTION: Ideal for creating customized high-utility sliding jigs, sleds and fixtures, while featuring a functional design that prevents play (lifting) for safer, high precision accuracy.
  • BUILD: This aluminum t-bar extrusion possesses a thick, heavy duty exterior that won’t warp or alter in shape, and is precision machined to accommodate a variety of woodworking applications, ensuring long term durability.
  • VERSATILE: A perfect fit for all 3/4" x 3/8" t-slotted -miter slots (and standard table saws with t- slotted  miter tracks), making this miter bar ideal for benchtop table-saw extensions, drill press, router table, and band-saw table applications.  Also works with for Powertec 71167, Miter T-Track, for creating extension, jigs and other woodworking requirements..
  • CUSTOMIZABLE: 48 inch profile can be custom cut to suit your individual project needs and specifications.
Check Stock

THKFISH Vertical Jigs Fishing Lures Metal Hard Bait Holographic Lure Jigging Spoon Lures Saltwater Tuna Lures Fishing Jigs for Bass Mackerel (5pcs 25g(5/6oz))

  • 1. HOLOGRAPHIC REFLECTIVE: Holographic reflective on the jigs body, attractive bright colors, the laser spray painting patterns design on the jig's both sides surface great with extremely vibrant reflective colors. Appearance of continuous metal flash and very durable in colors. Metal jigs can be multi-angled refracte light in the water to better tempt the big fish..
  • 2. SHARP AND STRONG HOOK: The assist hook is super strong, chemically sharpened, heavy-duty durable high carbon steel, very sharp and strong treble hooks can be used in saltwater and freshwater. Solid split ring do not easy to breaks off on fight. Ideal for casting and jigging presentations in both saltwater and freshwater..
  • 3. GOOD PERFORMANCE: Made of metal, jigs cast like a bullet Fall straight to the bottom, has a bit of flutter and swimming action on its way down, and retrieves with a great flipping action. The Jigging Spoon gets fish to strike with a methodic jigging action or on a straight retrieve. With smooth and rapid diving action, easy to work. Metal jig is so strong and durable that it won’t be tear..
  • 4. WIDE RANGE OF TARGET FISHES: Each high-quality vertical jig can withstand wear and corrosion, makes it reusable. Target Fish: Metal jig catches a wide range of saltwater and ....
Check Stock

Miter Bar, 1Pcs Durable In Use Aluminium Alloy Miter Bar Slider Table Saw Gauge Rod Wood Working Tool Suitable for Jigs Fixtures Sleds Router Tables and General Woodworking, 300 mm / 11.81 inch

  • Wide Applications : This is a miter bar usually used in table saw woodworking works, for building various jigs on your table saw, like miter sleds etc..
  • Convenient to Use : Universal threaded mounting holes for convenient use. Includes plans for a wide variety of shop-made jigs and fixtures. Adjustable stainless steel runner for perfect sliding action.
  • Good Performance : Adjusts for perfect sliding action in any standard miter gauge slot with just a twist of the wrist. Locks securely in any standard miter gauge slot with another twist of the wrist.
  • Useful and Practical : For building various jigs on your table saw, like miter sleds. Includes threaded mounting holes and hardware for easy attachment to any application.
  • Fine Quality Aluminium Alloy Material : Made of high quality aluminium alloy, this miter bar is of strong strength and reliable durability for several year using without abusing.
Check Stock