Categories

Best Metal Gear Motor

WLtoys 104072 RTR 1/10 2.4G 4WD 60km/h Brushless RC Car Drift On-Road Metal Chassis LED Light Vehicles Model Off-Road Climbing Truck

  • 1. Simulation structure design, real car control feeling (remote control, to achieve high-speed driving, instantaneous rapid acceleration, deceleration, brake, backward turning, lighting control).
  • 2. Four-wheel metal suspension system The suspension performance can better adapt to the bumps brought about by a variety of terrains plus independent suspension swing arm Smooth straight driving and excellent body control posture.
  • 3. The whole vehicle adopts ball bearing alloy gear simulation differential structure metal base plate, driving smoother, gear durable. 4. Adopt 7.4V 3000mAh high rate lithium-ion battery, brushless motor power output, speed up to 60 km / h.
  • 5. Adopt 6KG 3-line steering machine to control steering, straight driving is more stable Over-bending control is more flexible and durable. 6. Natural rubber tires, strong ground adhesion and friction resistance.
  • 7. Cool LED lighting car shell can control breathing headlights and simulated turn signals Brake lights Night operation barrier-free. Package Included: 1X RC Car 1X Remote Controller 1X Battery (Depends on your order selection) 1X USB Charging Cable 1X Manual 1X Cross Sleeve,Tips for Buyers:the remote control car is too fast, it is recommended to use remote control car in open areas t....
Check Stock

A/C adaptor S-8G -29 FOR S-8G 2.4GHz Extreme RC Helicopter

  • MG90S Micro Servo Motor, updated SG90 serve motor..
  • Operating Speed: 0.11 seconds / 60 degrees (4.8V).
  • Structural Material: Aluminum metal teeth, coreless motor, double ball bearin.
Check Stock

Adeept AD002 4 Pcs Compatible with MG90S 9G Micro Servo Motor, Metal Geared Micro Servo for RC Robot Car Helicopter Airplane Controls Boat Raspberry Pi Project

  • 【High Quality】100% new, good quality, AD002 Micro servo motor, Compatible with MG90 servo motor..
  • 【Full Metal Gear】 Metal gear with less noise,the metal gears help with the movement,these will rotate the proper direction..
  • Operating Speed: 0.11 seconds/60 degrees(4.8V).The servo Maximum angle is 180..
  • 【Wide Application】The great micro servo motors for helicopter/ boat / robot car / robot arm /remote controlled aircraft DIY. Fit for electronics DIY, compatible with Arduino, Raspberry Pi..
  • 【Service Guarantee】If you encounter any problems during use, please contact us, we will provide solutions to ensure your experience. We will reply within 24 hours.This AD002 servo motor is compatible with all Adeept robots..
Check Stock

Adeept AD002 2 Pcs Compatible with MG90S 9G Micro Servo Motor, Metal Geared Micro Servo for RC Robot Car Helicopter Airplane Controls Boat Raspberry Pi Project

  • 【High Quality】100% new, good quality, AD002 Micro servo motor, Compatible with MG90 servo motor..
  • 【Full Metal Gear】 Metal gear with less noise,the metal gears help with the movement,these will rotate the proper direction..
  • Operating Speed: 0.11 seconds/60 degrees(4.8V).The servo Maximum angle is 180..
  • 【Wide Application】The great micro servo motors for helicopter/ boat / robot car / robot arm /remote controlled aircraft DIY. Fit for electronics DIY, compatible with Arduino, Raspberry Pi..
  • 【Service Guarantee】If you encounter any problems during use, please contact us, we will provide solutions to ensure your experience. We will reply within 24 hours.This AD002 servo motor is compatible with all Adeept robots..
Check Stock

60W Mini Rotating Lathe,12000RPM Metal Rotating Lathe,Mini Lathe Machine Lathe Machine Tools,for Wood Metal Glass Plastic Machining

  • ?¡¾PRODUCT PARAMETER¡¿ ?Motor Speed: 12000rpm ? Input Voltage/Current/Power: 12V DC/5A/60W ?Axis X travel: 32mm.
  • Axis Z travel: 145mm ?Max Diameter of Machined Material: 100mm ? Machining Accuracy: 0.05mm..
  • ?¡¾MAIN PARTS¡¿ Headstock, tailstock, long machine bed, big slider, small slider, motor blade, gear, connection block, belt cover etc. All of the parts are made of metal except belt cover..
  • ?¡¾GOOD PERFORMANCE¡¿Maximum motor power is 60W by using more powerful motor.With 0.02mm accuracy of scale lines, the hand wheel increases the precision of workpiece machining..
  • ?¡¾POWERFUL FUNCTIONS¡¿Motor case and headstock are jointed. Axis Z slider can spin 180¡ã.Center height is 75mm and distance between centers is 135mm, motor speed normally drops to 2000rpm when using the lathe to machine metal..
  • ?¡¾USE RANGE¡¿ Lathe tool is made of high speed steel material, which can machine soft metal, nonferrous metal and precious metal..
Check Stock

Mac 10 [feat. Lil Baby & Lil Duke] [Explicit]

  • Proline and Hybrid versions feature an Electronic Trigger Unit (ETU) and Mosfet for improved trigger response and durability..
  • Gen 2 version features an upgraded gearbox and motor for increased performance and reliability..
  • Hybrid version features a metal front rail and polymer body for a balance of durability and weight.300 Rounds High Cap Magazine Included.
  • Proline version features a full metal construction for maximum durability that Adds A Realistic Look And Feel While Also Being Lightweight. 120 Rounds Mid Cap Magazine Included.
  • GEAR: The gearbox is equipped with 8mm ball bearings for smooth operation, featuring an 18:1 steel gear ratio. The Hybrid and Proline versions also come with a high-torque motor with 19k RPM, delivering consistent and reliable performance..
Check Stock

MG90S 9g Servo Motor Micro Metal Gear for Robot Car Plane RC Helicopter Arduino

  • MG90S Micro Servo Motor, updated SG90 serve motor..
  • Operating Speed: 0.11 seconds / 60 degrees (4.8V).
  • Structural Material: Aluminum metal teeth, coreless motor, double ball bearin.
Check Stock

AMOGOT RC Steel Metal Spur Diff Differential Main Gear 64T 17T 21T 26T 29T Motor Gear for HSP 1/10 Monster Truck Brontosaurus Redcat Volcano EPX RC Replacement Parts

  • 【Feature】64T main gear and 17T 21T 26T 29T motor gears combo. 64T steel gears general for 1/10 trams, 17T, 21T for HSP 94111PRO 94111, 26T for HSP....
  • 【Spec】17T 21T 26T 29T Pinion gear aperture is 3.175mm, perfectly compatible with your motor, 64T Main gear aperture is 5mm, perfectly compatible....
  • 【Material】Steel Metal material, anti-wear, strong and durable, Rust-proof treatment on the surface of gears,more powerful and more stable..
  • 【Suit for】compatible with Redcat Lightning EPX Drift, Lightning EPX PRO, Sandstorm, Sandstorm TK, Tsunami EPX, Volcano Epx/epx PRO, Vortex HSP....
  • 【Package included】1 * 64T Motor Gear / 1 * 17T Pinion/ 1 * 21T Pinion/1 * 26T Pinion/1 * 29T Pinion.
Check Stock

Pelican - Boat Intruder 12 - Jon Fishing Boat - 12 ft - Great for Hunting/Fishing Khaki/Beige

  • Durable: Our patented RAM-X material is known for its high-impact resistance and will make your fishing boat last through time..
  • High Capacity: This fishing boat holds a maximum weight capacity of 420 lb, ensuring you enough room to bring someone along on your fishing trip and space for all your gear. Its spacious interior can contain up to 36 cubic feet of cargo..
  • Safe: This boat is designed to provide excellent stability and balance when you're casting lines and reeling in fish. Our unique manufacturing process allows us to include additional flotation inside the hull of all of our fishing boats in order to meet or surpass ABYC standards..
  • Multiple storage compartments to store all your fishing gear for your trip on the water.
  • Two Metal Motor Mounts: Featuring a built-in metal bow trolling mount and stern motor mount, the INTRUDER 12 is ready to take your choice of electric or gas motor (maximum 6 HP)..
Check Stock

Redrex Dual Gear Ender 3 Extruder with Nema 17 Stepper Motor Compatible with Creality Ender 3 V2,Ender 3 Pro,Ender 3 Neo,Ender 3 V2 Neo,Ender 3 Max Neo,Ender 5,Ender 7,CR6 SE,CR10,Vyper 3D Printer

  • 【Double Gear Extrusion Mechanism】The filament is gripped by the dual drive much more firmly with less deformation, so it doesn't jam as much in....
  • 【Upgraded Idler Gear Design】This idler gear is upgraded with two washers on both sides, so the sharp gear will NOT ride against the bottom of the....
  • 【Application】This all metal dual drive extruder with motor kit is compatible with Ender 3,Ender 3 V2,Ender 3 Pro,Ender 3 Neo,Ender 3 V2 Neo,Ender....
  • 【High Torque Motor】The Nema 17 stepper motor provides 1A 40Ncm/57g.cm^2 in holding torque which helps to improve the motor's stability..
  • 【Kindly Reminder】:Please calibrate the E-steps from 100 to 139.
  • Please lubricate the gears before first use.
Check Stock

Bringsmart JGY-370 12V 10rpm DC Worm Gear Motor 12 Volt High Torque Engine Mini Turbine Worm 12V Reducer Electric Motor Self-locking for DIY Mini Geared Motor (JGY-370 12V 10rpm)

  • ALL-METAL GEARS, high-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the turbo worm gear box motor body..
  • D SHAPED OUTPUT SHAFT, using high hardness steel, good toughness, impact resistance, the quality of the bearing and the service life of the turbo worm gear motor are improved, extremely durable.
  • GEAR DC MOTOR with MICRO-TURBINE WORM, you can change the wiring-connection to change motor rotation. Low noise and high torque..
  • Application: Label machines, remote control curtains, automatic voltage regulators, barbecue grills, ovens, washers, waste disposal machines, household appliances, coin machines, paper currency recognizers, automatic actuators, coffee machines, towel machines, printing machines and Stage lighting. This section is suitable for small motor configuration high speed ratio, the installation space is limited occasions, large torque output..
Check Stock

Kobalt 5-in 24-Volt Max-Volt Cordless Angle Grinder

  • Powerful 7.5 AMP motor for high output power in a more compact tool (only 4.5 pounds).
  • Small diameter barrel grip (only 2 to 1/2 inches) for added comfort.
  • Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life.
  • Lock on/off feature for continuous operation.
  • AC/DC switch for use with alternative power source.
  • Protective zig zig varnish seals the armature from dust and debris for longer tool life.
  • Extra large paddle switch for comfortable operation.
  • Thicker coil wires are wound more closely to reduce heat and energy loss.
  • All ball bearing design and metal gear housing for durability.
  • (1) 4 1/2inches General Purpose Turbo Rim Diamond Blade A 94552.
  • (5) 4 1/2 inches 24 Grit Grinding Wheels.
Check Stock

MERCURY Genuine Premium Gear Lube Qt - 858058K01

  • Lower unit gear oil formulated to protect against corrosion and excessive wear.
  • Designed for outboard motor lower unit and sterndrive applications above 75 HP.
  • Extreme pressure synthetic additives protect gears from metal to metal contact.
  • Extends gear life in extreme conditions including high-speed and high-horspower applications.
Check Stock