Categories

Best Metal Machining Part

SpeTool 12501 2 Flutes Carbide CNC End Mill For Aluminum (1/4 Shank, 2.5 inch Long) Router Bit Spiral Mill

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • The EndMill With Flat Top, 2-Flutes, Large Chip Pocket, Easy Chip Removal..
  • For Aluminum, Non-ferrous Metal, Plastics, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Slot Machining, Side Face Machining, Hole Machining. Please Adjust the Speed, Feed and Cutting Depth According to Actual Cutting Conditions..
Check Stock

60W Mini Rotating Lathe,12000RPM Metal Rotating Lathe,Mini Lathe Machine Lathe Machine Tools,for Wood Metal Glass Plastic Machining

  • ?¡¾PRODUCT PARAMETER¡¿ ?Motor Speed: 12000rpm ? Input Voltage/Current/Power: 12V DC/5A/60W ?Axis X travel: 32mm.
  • Axis Z travel: 145mm ?Max Diameter of Machined Material: 100mm ? Machining Accuracy: 0.05mm..
  • ?¡¾MAIN PARTS¡¿ Headstock, tailstock, long machine bed, big slider, small slider, motor blade, gear, connection block, belt cover etc. All of the parts are made of metal except belt cover..
  • ?¡¾GOOD PERFORMANCE¡¿Maximum motor power is 60W by using more powerful motor.With 0.02mm accuracy of scale lines, the hand wheel increases the precision of workpiece machining..
  • ?¡¾POWERFUL FUNCTIONS¡¿Motor case and headstock are jointed. Axis Z slider can spin 180¡ã.Center height is 75mm and distance between centers is 135mm, motor speed normally drops to 2000rpm when using the lathe to machine metal..
  • ?¡¾USE RANGE¡¿ Lathe tool is made of high speed steel material, which can machine soft metal, nonferrous metal and precious metal..
Check Stock

Carbide Rough Milling Insert Carbide Inserts for Steel, Stainless Iron and Cast Iron PVD (AlTiN) Coating Carbide Milling Insert/Carbide Inserts APMT1604PDER-H2 APKT1604 for BAP400R Milling Holder

  • Machining: Copper And Aluminum Medium Finish Machining.
  • Allows Faster Machining And Leaves Better Finished on Metal Parts, Reduce the Downtime Required to Change Edges and Easily to be Replaced..
Check Stock

ARKMODEL German U-Boat Type VIIC Submarine 1:48 Scale Models Plastic Hobby Kit

  • ... VIIC Kit introduction: This is a HIGH QUALITY model kit. Designed by detailed drawing and resource. Suit for building an RC model or a static display model. Hull and all components are the ABS plastic injection forming. Part of the detail components and power components can provide metal material, CNC precision machining and become upgrade kit..
  • Kit includes colour decal. Kit includes large size brass photo etch. Kit includes 3D illustrated step by step instruction. VIIC Kit included: This kit(hull) comes with almost everything that needs to build an RC running model. Kit includes all plastic parts, metal parts, brass etching tablet, water stickers,specifications, and installation of the chamber components..
  • Used to drive the submarine voyage, snorkeling chamber, all the mechanical and electronic equipment, such as motors, pumps, steering gear, electronic governor, electronic switch, remote control equipment, batteries, etc., are installed in the WTC(water tight Cylinder),WTC need to buy separate. Coating ,RC and glue are not included.
Check Stock

MAACFLOW - Stainless Steel Barb/Barbed Hose Fitting 5/8 Hose ID Barb x 1/4 Male NPT Adaptor/Coupler/Connector Pack of 2

  • Passivation process to increase the level of protection against rust and corrosion on the material, thus greatly improve product's durability and lifespan.
  • High-speed machining process improves the machining accuracy and the machined part’s surface, to achieve good surface finishing.
  • Design for thicker wall, longer on thread and barb, to increase fitting's durability and relliability.
  • 100% NPT gage inspection to ensure thread conformity.
  • Clamshell packing to protect fitting and thread being damage during transit.
Check Stock

Wisamic 11 Pcs 5/16 inch Carbide Tipped Cutter Set for Metal Lathe Turning, Boring, and Chamfering

  • 2 pieces: 4-7/8" long Cranked Boring Bars.
  • Made of drop forged tool steel with tungsten carbide tips..
  • Can be resharpened & reshaped for many times..
  • Suitable for machining mild steel brass copper and plastics..
  • For metal lathe, mini lathe, milling other general machining operations such as turning & boring..
Check Stock

Accusize Industrial Tools 2 Pc of Each Kind of Carbide Inserts for 2387-2003, CVD Coated and Tin Coated, Total 10 Pieces, 2387-2003inserts

  • Replacement Inserts for Turning Tool Set 2387-2003.
  • TiN Coated Surface Lasting Longer in Metal Machining.
  • Cannot be Used for Aluminum and Stainless Steel Machining.
  • External Threading 11ER, MGMN200, WCMT2.52, CCMT21.51, and DCMT21.51..
Check Stock

Accusize Industrial Tools 2 Pc of Each Kind of Carbide Inserts for 2387-2004, CVD Coated and Tin Coated, Total 10 Pieces, 2387-2004inserts

  • Replacement Inserts for Turning Tool Set 2387-2004.
  • TiN Coated Surface Lasting Longer in Metal Machining.
  • Cannot be Used for Aluminum and Stainless Steel Machining.
  • External Threading 11ER, MGMN200, WCMT2.52, CCMT21.51, and DCMT21.51..
Check Stock

Acratech GXP Ball Head w/ Knob Clamp

  • 【Low Profile More Stable】The ball head is designed with a low center of gravity, CNC machining, 44MM large ball diameter, making it extremely....
  • 【Excellent Quality】The low profile ball head adopts all-metal structure, 0.1MM machining tolerance, anodic anodized, ultra-high-strength aviation....
  • 【Excellent Design】Double grooves and lightweight design. The maximum load-bearing capacity of this low profile ball head camera mount is 44....
  • 【Precision Adjustment】4 * 90 degrees, 5 degrees per scale, and double spirit bubbles to meet the needs of accurate photography and Panoramic....
  • 【Widely Applicable】3/8"screw holes at the bottom of the ball head and easy to install tripod, monopod, camera slider and mini tripod. With 1/4"....
Check Stock

ARKMODEL VIIC Kit 1/48 German U-Boat RC Submarine Include Single Piston Tank WTC

  • ... VIIC Kit introduction: This is a HIGH QUALITY model kit. Designed by detailed drawing and resource. Suit for building an RC model or a static display model. Hull and all components are the ABS plastic injection forming. Part of the detail components and power components can provide metal material, CNC precision machining and become upgrade kit. Kit includes colour decal. Kit includes large size brass photo etch. Kit includes 3D illustrated step by step instruction.
  • This kit(hull) comes with almost everything that needs to build an RC running model. Kit includes all plastic parts, metal parts, brass etching tablet, water stickers,specifications, and installation of the chamber components. Used to drive the submarine voyage, snorkeling chamber, all the mechanical and electronic equipment, such as motors, pistons, steering gear, electronic governor, electronic switch, etc., are installed in the WTC.
  • This one VIIC already included WTC (water tight cylinder) Single Piston tank Kit,WTC Size:Length 736mm ,Beam 90mm Already included servos, ESC, BCU.
Check Stock

Tihebeyan Metal Fishing Rod Seat Set, Fisher DIY Reel Seat Base Fishing Tackle Accessory

  • [Purpose] — Designed for DIY fishing rod handle accessory, necessary item for anglers.
  • [Environmental Friendly Material] — The fishing rod seat is made of quality metal, high strength, heavy duty, anti-rust and durable.
  • [High Quality Machining] — Fine machining ensures precise mounting thread and perfect fit to your fishing rod.
  • [Lightweight] —The fishing accessory will not add much too burden to your rod, makes your fishing more labor-saving and comfortable.
  • [with Necessary Fitting]— With necessary fittings, it is easy to install and use.
Check Stock

Machining and Grinding Fluid | Fusion Cool 2240 | General Purpose Coolant for Cutting and Grinding Machine Shop Operations | Semisynthetic 1 Gallon

  • Fusion Cool 2240 is a top cutting oil for drilling metal. This cutting fluid product is perfect for machining of many kinds of metals. Works well for grinding, milling, CNC machining, tapping, turning..
  • Works well for bandsaw cutting, drilling, tap and die, drill bit cutting, worm drive saw, and many more cutting applications..
  • Superior sump life with ultra-low odor and mist. Direct Cross-Over / Replacement for Trim SC 520.
  • Environmental friendly, recyclable coolant.
Check Stock

AIYIHOBBY Aluminum Alloy Front Caster Block & Steering Blocks kit with Ball Bearings Upgrade Parts for 1/10 Traxxas 2WD Slash, Stampede, Rustler, Replace 3632 3736(Blue)

  • Compatible with 1/10 Scale Traxxas 2WD Slash, Stampede, Stampede VXL, Slash VXL, Rustler, Rustler VXL, Ford F-150 Raptor, Nitro Slash, Bigfoot 2WD RC Cars Trucks ONLY..
  • 2WD Front Caster Steering Blocks kit can be easily upgrade replace Traxxas stock part #3632 Caster blocks, #3736 Steering blocks..
  • 1/10 Front caster steering blocks kit is made of aluminum alloy material for increased crash resistance and long-lasting durability during the most extreme RC action..
  • Metal front caster steering blocks is CNC precision machining for smooth suspension arms operation in all conditions..
  • Package Include(Necessary parts required for installation): 2*Steering Block, 2*Caster Blocks (left/right), 6*Screw Pins, 2*Screw, 4*5x11x4mm bearings, 4*Gasket..
Check Stock