Categories

Best Metal Pipe Clamp

Rubber Cushion Strut Clamp 1" NOM (1-1/8" OD) for Mounting Copper Piping, PEX Pipe, CVPC Tubing to Strut Channels [5 Pack]

  • [QUALITY] Zinc plated to prevent corrosion, the heavy duty steel strut clamp brackets with attached bolt and nut clamp securely over a hard rubber cushion to nearly surround the sides of a pipe or tube..
  • [PROTECTIVE RUBBER CUSHION] The hard rubber cushion protects pipe and tube by absorbing shock caused by vibration and temperature changes, reduces unwanted noise, insulates pipe and tubing from metal surfaces, and prevents galvanic corrosion..
  • [APPLICATION] Insert pipe or tube into rubber cushion inside steel strut brackets. Mount strut clamp legs to 1" NOM (1-1/8" OD) strut channels. Attach nut to bolt and tighten..
  • [CONTENTS] Each of the 5 clamps contain two heavy duty zinc plated steel half brackets with attached bolt, a nut, and protective rubber cushion..
  • [VERSATILE] Use for 1" NOM (1-1/8" OD) copper pipe, PEX pipe, CPVC tube, and other conduit tube, hose, and wire applications. Can be hung vertically and horizontally on walls and ceilings. Compatible with unistruts in 1-5/8", 7/8", 13/16" heights..
Check Stock

SHARS 3/4\ X 5/8''-11 Pivot Hold Down CLAMP 202-4811 P]

  • Cycling right-angle bracket U-shaped pipe clamp.
Check Stock

TICONN 42PCS Cable Clamps Set - Rubber Cushioned 304 Stainless Steel Hose Clamps Loop Clamps Pipe Clamps in 6 Sizes (42PCS combo, 1/4'' 5/16'' 3/8'' 1/2'' 5/8'' 3/4'')

  • [PREMIUM QUALITY] – The metal clamps are made of 0.025'' thick premium 304 stainless steel and EPDM (Ethylene Propylene Diene Monomer) rubber cushion. The whole stainless wire clamp provides an excellent corrosion and rust resistances performance when used in harsh conditions. The working temperature of the clamp kit ranges from -4°F to 212 °F..
  • [WIDE APPLICATIONS] – The cushion reduces vibration and wear from clamp edges. The pipe holder clamp is ideal to hold pipes, hoses, cables, fuel lines close to the mounting surface in boat/marine, household, automotive, garden, heating and air conditioning. You can always find a proper metal clamp from TICONN that meet your needs in different applications..
  • [STAY ORGANIZED] – The cable clamp assortment come within a storage box for easy storage and assortment. The TICONN logo and clamp size is engraved on each small clamp which makes it fast to identify the right tube clamp for every application..
  • [SIZE AND QUANTITY] – The hose clamp assortment box contains 24PCS wire clamps that is 0.6in (15mm) wide and 0.025in (0.6mm) thick. The diameter of the screw hole is 1/4 in (6.4mm). The stainless steel clamps fit 1/4'' 5/16'' 3/8'' 1/2'' 5/8'' 3/4'' pipe/wire..
  • [TICONN BRAND QUALITY COMMITMENT] – We stand be....
Check Stock

PONY 50 Clamp Fixture for 3/4 Inch Black Pipe

  • features crank-type handle and 1-3/4-inch square clamp faces.
  • Hardened steel construction with baked enamel fish with no holes, rivets, or notches.
Check Stock

Pony Tools 50 3/4in. 6 Pack Ajustable Clamp Fixture for Black Pipe

  • Pony 50 Clamp Fixture for 3/4 Inch Black Pipe is America's most popular, most widely-used clamp fixture design. It is ideal for metalworking, woodworking and frame assembly in applications that range from do-it-yourself to industrial production.
  • Mounts on any length 3/4" black pipe with both ends threaded (pipe not furnished). A Pony Clamp Fixture is one of the handiest tools in any shop. One set of Pony Clamp Fixtures can be used to make any number of different length bar clamps simply by using the fixtures on different lengths of pipe.
  • Heavy-duty black pipe is recommended. No tools are required for assembly. Simply screw the head assembly onto the pipe threads at one end.
  • Slide the tail-stop onto the pipe at the other end. Then apply the coil-spring stop to the pipe threads at the tail-stop end of the pipe to prevent the tail-stop from sliding off the pipe during adjustment away from the work being clamped.
  • Pony Clamp Fixtures are interchangeable from one pipe length to another, so one set can serve several needs.
Check Stock

Pony Tools 52 6 Pack 1/2in. Ajustable Clamp Fixture for Black Pipe

  • Pony 52 Clamp Fixture for 1/2 Inch Black Pipe is America's most popular, most widely-used clamp fixture design. It is ideal for metalworking, woodworking and frame assembly in applications that range from do-it-yourself to industrial production.
  • Mounts on any length 1/2" black pipe with both ends threaded (pipe not furnished). A Pony Clamp Fixture is one of the handiest tools in any shop. One set of Pony Clamp Fixtures can be used to make any number of different length bar clamps simply by using the fixtures on different lengths of pipe.
  • Heavy-duty black pipe is recommended. No tools are required for assembly. Simply screw the head assembly onto the pipe threads at one end.
  • Slide the tail-stop onto the pipe at the other end. Then apply the coil-spring stop to the pipe threads at the tail-stop end of the pipe to prevent the tail-stop from sliding off the pipe during adjustment away from the work being clamped.
  • Pony Clamp Fixtures are interchangeable from one pipe length to another, so one set can serve several needs.
Check Stock

25 Pack Stainless Steel Hose Clamps, 3/4 inch to 1-1/8 inch Worm Gear Metal Hose Clamps for Pipe, Dryer Repair, Tubing and Fuel Line

  • Adjustable hose clamps are high torque, adjustable from 3/4 - 1-1/8 inch (19-29mm), ideal as 3/4 inch pipe clamps, 1 inch hose clamps, 1-1/8 inch metal clamps, etc..
  • Metal clamps are all premium 304 stainless steel to provide maximum corrosion resistance to salt and most chemicals, the worm drive hose clamps comply with SAE standards, when installing on the pipe, you will no longer worry about them rusting and breaking..
  • Pipe clamp for a variety of applications for marine, auto, water pipes, fuel lines, dryer, vent, radiator, etc. to meet your needs in different applications..
  • Easy to install, use a screwdriver to tighten or loosen the screw of hose clips then adjust the size, Secures pipe clamp tightly in place..
  • You will receive 25 pieces of 3/4 to 1-1/8 inch hose clamps and if for any reason you are not satisfied with your purchase, please contact us for a lifetime refund or exchange!.
Check Stock

Aexit 3 Pcs Clamps 50mm-60mm Dia Drainage Pipe Exhaust Tube Fastener Cinch Clamp Bracket Support Tubbing Squeeze Action Clamps Fastener Clip

  • Total Size : 7.5 x 7.5 x 3cm / 3" x 3" x 1.2"(L*W*H).
  • Package Content : 3 x Exhaust Pipe Clamp.
Check Stock

Aexit 2 Pcs Clamps 85mm-95mm Dia Drainage Pipe Exhaust Tube Fastener Cinch Clamp Bracket Support Tubbing Squeeze Action Clamps Fastener Clip

  • Total Size : 12 x 13 x 3cm / 4.7" x 5.1" x 1.2"(L*W*H).
  • Package Content : 2 x Exhaust Pipe Clamp.
Check Stock

Aexit 3 Pcs Clamps 60mm-70mm Dia Drainage Pipe Exhaust Tube Fastener Cinch Clamp Bracket Support Tubbing Squeeze Action Clamps Fastener Clip

  • Total Size : 9.5 x 9 x 3cm / 3.74" x 3.54" x 1.2"(L*W*H).
  • Package Content : 3 x Exhaust Pipe Clamp.
Check Stock

Reptile Heat Lamp, Makmzoon Timing Reptile Light Fixture 50W Heat Bulb Light Bulb with Clamp 360° Adjustable Metal Pipe for Turtle/Animal/Plant - 2pack Sun Lamp & 3.5'' Dome

  • [Timer & Dimmable Button] This lamp fixture not only control the light intensity of uva uvb heat bulb, but control the lighting time of heat lamp (2H/4H/8H can be selected)..
  • [2 pack Sun Lamps] The box contains 2 sun lights. We have thickened the tungsten wire, so our reptile heat lamp‘s lifespan is longer than others, about 1500h. These bulb very suitable for turtle and reptiles..
  • [High uv Reflectivity] 3.5 inch deep dome's inner wall uses electroplating and polishing process, which has the best reflection ability for uva/uvb. Fixture's outside is all black. Like an night elf..
  • [Soft Metal Pipe] The 11mm diameter metal pipe can be 360° bent more than 10,000 times at will. Because we add a layer harmless vinyl, which greatly reduces the metal wear rate. Compared with other‘s pipe, ours feel better, not freeze hands, and not conductive, very safety..
  • [Stable Metal Clip] Clamp is also metal, which is more stable and safer clipped on turtle tank or reptile terrarium. Could clamp objects with a thickness of 1.9 inches..
Check Stock

6 Pack 3/4 inch Adjustable Pipe Bracket Clamp, Stainless Steel Wall Ceiling Mount Pipe Support Pipe Hanger Clamp, Split Ring Hanger ID 15mm-19mm

  • 15-19mm Pipe Strap Clamp: The Pipe Clamp fits for 1/2 inch/15mm to 3/4 inch/19mm diameter pipe, the nut is M8..
  • Stainless Steel Pole Clamp: The split ring hanger is made of 304 stainless steel, it durable and offers rust protection..
  • Package included: 6 pack Pipe Bracket Clamp. Length: 2.2 inch/55mm, width: 1.1/ 28mm..
  • Easy to Use: Easy to install, pipe bracket clamp can be installed on the wall or ceiling..
  • Applications: These adjustable pipe support bracket clamp are suitable for both industrial and home applications..
Check Stock

ZEONHAK 4 Pack 3/4 Inches Pipe Clamp, Wood Gluing Pipe Clamp Set, Heavy Duty Woodworking Cast Iron Clamp for Metalworking, Woodworking and Frame Assembly, Red

  • MADE OF CAST IRON - This wood gluing pipe clamps are constructed of premium heavy duty cast iron, which is durable and sturdy. The surface of pipe clamp is finished by baking varnish, and the surface is smooth and shiny. The thread spindle is coated with black oxide..
  • ERGONOMIC DESIGN - Woodworking cast iron clamps with ergonomic handle makes clamping easier and reduces hand fatigue. The H-style base prevents the clamp from tipping out. Equipped with multiple steel sheets, the spring clamp clamping ability is stronger..
  • EASY TO USE - The wood gluing pipe clamp is easy to operate. Just slide the tail-stop onto the pipe at the other end. Then apply the coil-spring stop to the pipe threads at the tail-stop end of the pipe to prevent the tail-stop from sliding off the pipe during adjustment away from the work being clamped..
  • MULTI-PURPOSE - The quick release pipe clamp is multifunctional. It is often used in metalworking, woodworking and frame assembly, ranging from DIY to industrial production. Owning a pipe clamp can bring convenience and fun to your life..
  • 100% GUARANTEE - If our pipe clamp have any quality problems, you can request a full refund and return within 30 days after receiving the products. Quality and customer satisfaction are our top prioriti....
Check Stock