Categories

Best Metal Rackmount Cases

AW 9U DJ Mixer Stand Adjustable Rack Mount Rolling Stage Cart Studio Music Show

  • [2-Layer Storage]: 22 15/16"x20 15/16" large upper platform with side mounting holes for customizably placing crossbars to fit mixers in different sizes.
  • Bottom rackmount with 2 metal crossbars & vertical side holes that used for mounting baffles to hold the amplifier, equalizer or power conditioner stably.
  • [Easy Mobility]: Equipped with 4 rolling casters for moving around to different positions as needed effortlessly.
  • 2 of them feature a lockable option for firmly holding the stand in place for safe movement.
  • [45° Adjustable Platform]: The angle of the upper platform can be adjusted by side knobs to an entirely flat or slanted surface for easier visibility and access as needed.
  • [Sturdy Construction]: Features overall metal construction for durable use and long lifespan, as well as providing a strong support for your expensive equipment with max load capacity of 220.46 Lbs for bottom rackmount & 110.23 Lbs for upper platform.
  • [Wide Application]: Applied as a universal electronic device rack stand for using with any sound equipment and perfectly used for clubs, public amenities, outdoor shows, studio, stage, etc..
  • Overall Dimension (LxWxH): 22 15/16" x 20 15/16" x 44 5/16" (58.2 x 53.2 x 112.5 cm).
Check Stock

Samson AirLine AWX Wind Instrument Micro Transmitter Wireless System with HM60 Wind Instrument Microphone, D-Band

  • Frequency-agile UHF wireless system designed for wind instruments.
  • 80 operating channels across 24MHz bandwidth.
  • Up to eight simultaneous systems per frequency band (region dependent).
  • ATX micro transmitter Clips directly to instrument bell (no beltpack or cable required).
  • Transmitter operates up to eight hours with built-in rechargeable lithium-ion battery.
  • HM60 condenser microphone capsule with supercardioid pickup pattern, 3-point halo isolation mount and 8.5" gooseneck for optimal mic placement.
  • CR99 wireless rackmount receiver with backlit LCD and metal chassis (rackmount kit included).
  • Group scan for easy single or multi-system setup.
  • Removable 1/4-wave antennas (front and rear antenna conncetions).
Check Stock

AW Rack Mount DJ Mixer Stand Studio Equipment Adjustable Stage Cart w/Wheel Music Party Show 16U

  • [2-Layer Storage]: Rack Mount Mixer Stand features 22 15/16" x 20 15/16" large upper platform with side holes for mounting crossbars customizable to place different sizes of mixers.
  • Bottom rackmount with 2 metal crossbars & vertical side holes for mounting baffles to hold the amplifier or equalizer stable, ideal for musician, DJ, performer, etc.
  • [Easy Mobility]: Equipped with 4 rolling casters for easy movement to different places as needed effortlessly.
  • 2 of them are lockable for firmly holding the stand in place.
  • [Adjustable Angle & Height]: Features knobs on each side of the upper platform, allowing you to adjust the angle to an entirely flat or slanted surface for easier visibility and access as needed.
  • With 48 7/16" to 54 15/16" height adjustable range to fit your operation height.
  • [Sturdy Construction]: Features overall metal construction for durability and long lifespan, providing a strong support for your expensive equipment with max load capacity of 132.28 Lbs for bottom rackmount and 88.18 Lbs for upper platform.
  • [Wide Application]: Applied as a universal electronic device rack stand for using with any sound equipment and perfectly used for clubs, public amenities, outdoor shows, studio or stage, etc.
Check Stock

TRENDnet - TEG-S16G 16-Port Unmanaged Gigabit GREENnet Switch, TEG-S16G, 16 x RJ-45 Ports, 32 Gbps Switching Capacity, Fanless, Rack Mountable, Network Ethernet Switch, Lifetime Protection Black

  • ETHERNET PORT CONFIGURATION: 16 x Gigabit RJ-45 Ports.
  • GIGABIT SPEEDS: 16 gigabit ports provide high-speed network connections to devices and a 32Gbps switching capacity allows data traffic to flow smoothly, reducing traffic bottlenecks.
  • RACKMOUNT DESIGN: The 16 Port Gigabit switch is designed with a sturdy rackmount metal design with a built-in power supply.
  • GREENnet ENERGY SAVINGS: The 16-Port Gigabit GREENnet switch, provides high bandwidth performance, ease of use, and reliability.
  • Reducing power consumption by up to 70%. GREENnet technology automatically adjusts power consumption as needed, resulting in substantial energy savings.
  • TRENDnet LIFETIME PROTECTION: All metal TRENDnet switches come with lifetime manufacturer protection.
  • DATA TRANSFER RATES: Ethernet: 10Mbps (half duplex), 20Mbps (full duplex).
  • Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex).
Check Stock

AW 9U DJ Mixer Stand Rack Mount Stage Cart Music Equipment Studio Party Show

  • [2-Layer Storage]: 22 15/16"x20 15/16" large upper platform with side mounting holes for crossbars(Not included) to place mixers.
  • 20 7/8" x 19 11/16" bottom rackmount with vertical side holes for mounting baffles to hold the amplifier, equalizer or power conditioner stably.
  • [Easy Mobility]:Equipped with 4 rolling casters for moving around to different positions as needed effortlessly.
  • 2 of them feature a lockable option for firmly holding the stand in place for safe movement.
  • [45° Adjustable Platform]: The angle of the upper platform can be adjusted by side knobs to an entirely flat or slanted surface for easier visibility and access as needed.
  • [Sturdy Construction]: Features overall metal construction for durable use and long lifespan, as well as providing a strong support for your expensive equipment with max load capacity of 220.46Lbs for bottom rackmount & 110.23Lbs for upper platform.
  • [Wide Application]: Applied as a universal electronic device rack stand for using with any sound equipment and perfectly used for clubs, public amenities, outdoor shows, studio, stage, etc..
  • Overall Dimension (LxWxH): 22 15/16" x 20 15/16" x 44 1/4" (58.2 x 53.2 x 112.4 cm).
Check Stock

UCTRONICS SSD Mounting Plate for Raspberry Pi 1U Rackmount, Compatible with All 2.5-inch SSD, with SATA Cable, USB Cable and USB Keystone Jack

  • You will be getting: 1 pcs SSD mounting plate, 1 pcs SATA to USB 3.0 cable, 1 pcs USB 3.0 male to male cable, 1 pcs female to female USB 3.0 keystone jack, and 1 pack of accessories..
  • Designed for 1U rackmount: This SSD mounting plate is specifically designed for UCTRONICS 1U rackmount ASIN B08F9X528J, compatible with any 2.5-inch SSD (Not included)..
  • High Speed: Come with a SATA cable and a USB 3.0 cable allows you to get significantly faster data transfers by connecting with your Raspberry Pi 4 B, 3 B/B+, and other B/B+ boards..
  • Expand the Storage for Your Raspberry Pi: Add a 2.5-inch SSD to your rackmount, which can make you easily add storage, perform backups, create disk images, implement data recoveries, and transfer data to your RPi..
  • Easy installation: 2 slots on the bottom for mounting the rack, 4 slots for fixing the SSD, each hole of the mounting plate can be perfectly aligned with the rackmount and cover the slots where no raspberry pis mounted on the rack, make your rack more manageable. Note: The thickness of the SSD cannot exceed 9mm..
Check Stock

UCTRONICS Jetson Nano Rackmount, 19\ 1U Rack Mount Supports 1-4 Units, Front Removable with Captive Loose-Off Screws, Compatible with All Nvidia Jetson Nano A02 B01/ 2G Developer Kit

  • This 19-inch rackmount is specifically designed to house Jetson Nano boards, compatible with all models A02 B01, 2GB developer kit. The rackmount is also compatible with the Jetson Xavier NX, but the Bluetooth & wifi base on the bottom of it needs to be removed for a perfect fit..
  • This Jetson rackmount is capable of holding up to 4 modules, it allows you to enjoy rackmount solutions for multiple different types of SBCs..
  • Easy Installation: Fixed with exquisite captive loose-off screws. Perfectly protect your Jetson nano from falling to the ground. All you have to do is rotating the screws. The total installation process will not exceed 10 minutes..
  • Front Removable: Use Captive loose-off screws for true no-installation, no screwdriver is needed to introduce your module into the enclosure..
  • Application: This is a housing solution to optimize the workspace, simple and well made, providing an aesthetically pleasing way to keep things organized. It also can be used for Jetsons clusters, video walls, and so on.
Check Stock

Chenbro Rackmount 4U Server Chassis RM42300-F

  • Material: 1.2mm SGCC Sheet Metal, ABS-HB Plastic Material.
  • Processor Support: Intel / AMD UP Quad, Intel / AMD DP Quad.
  • External Bay: 3x 5.25″, 1x 3.5″, 1x Slim ODD(or 2.5″ HDD kit).
Check Stock

Rosewill Server Rack, 19 Inch Desktop Open Frame Server Desk Rack Free Standing

  • Rosewill 25U 4 post Server racks are able to provide the best way to store your server network, telecommunications equipment and perfect compatible with server accessories such as server shelf, cable managements..
  • Rosewill 4 post adjustable server rack cabinet allows users to adjust depth of horizontal rails from 22 to 40 inches by themselves which means user never got stuck with different server cases, server rails and others..
  • The 4 post server rack comes with adjustable rails which offer the flexibility to customers who owns different servers. This open frame server rack (25U) is suitable for all rack mount server chassis, network switches, routers and etc..
  • The server rack posts have easy-to-read Unit (U) and depth adjustment markings for DIY builders and IT staff to recogonize and the convenient cable manager with hooks gives a organized environment for data centers..
  • With RoHS Compliance, Rosewill adjustable open frame rack guarantees our rackmount products and materials to be eco-friendly for our customers and the environment..
Check Stock

SKB Component Rack, Black (1SKB-ISF2U)

  • Heavy-duty rackmount accessory drawer with lock and keys. 45lb weight capacity. Durable metal chassis and parts for road transportation. Smooth metal gliding runners..
  • Easy installation with 4 rack screws. Inside drawer dimensions 16" W x 15" L x 4.5" H.
  • Each locking drawer comes with 2 set of keys. 15 inch-deep interior allows you to keep organized. Good for storing laptops, microphones, electronics, and other valuable accessories..
  • Ideal for open-frame or networking server racks needing secured storage. Also works great as a DJ organizer, AV rack cable drawer, or DVD drawer for a home theater cabinet..
  • The locking rack drawer comes assembled. Working right out the box. Available in 2U, 3U and 4U models..
Check Stock

Aumox 28-Port Gigabit PoE Switch with 24 x PoE 400W, 2 x Uplink Gigabit Ports, 2 x 1G SFP Slots, Rackmount or Desktop, PoE Recovery, Plug and Play, Fan Design,VLAN, 802.3 Af/at, Unmanaged (SG528P)

  • ... gigabit PoE Ethernet switch offers 26*10/100/1000 Mbps Base-TX RJ45 ports, including 24 PoE ports, automatically identifies and powers PoE devices. And 2 Gigabit SFP slots for high-speed connections.With 400W total power output, supply power to wireless AP, IP Camera, VOIP Phones and much more..
  • 【Easy to Install, Rackmount or Desktop】: Supports automatically detect devices, just plug in the power cord and network cable, no configuration is required. Aumox is more intelligent and efficient to determine the power supply priority. And it supports rackmount desktop or wall mount placement, the 19-inch length compatible with more switch racks, providing with more mounting options..
  • 【Reliable PoE Auto Recovery】: Equipped with the innovative PoE Watchdog feature, the switch automatically detects and reboots the dropped or unresponsive PoE-powered devices without the need for manual monitoring, ensuring a more stable and reliable operation..
  • 【Metal Casing, Efficient Cooling】: Sturdy metal casing and powerful industrial fans design provide more stable performance and heat dissipation while effectively reducing noise, enabling safer and longer-lasting operation in a variety of temperature environments..
  • 【Designed to Meet Diverse Needs】: Flexible i....
Check Stock

Tripp Lite 48-Port 2U Rackmount Cat5e 110 Patch Panel 568B, RJ45 Ethernet(N052-048)

  • 19 in. rackmount ready, 1U Height ( 1.75" ).
Check Stock

KRI CK4209 Black 1.2mm SGCC 4U Rackmount Server Chassis 2 External 5.25 Drive Bays

  • Material: 1.2mm SECC Sheet Metal, ABS Plastic Material.
Check Stock