Categories

Best Metal Roofing Screws With Caps

Metal Roofing Screws: (250) 10 x 2\  Galvanized Hex Head Sheet Metal Roof Screw. Self Starting Metal to Wood siding Screws. EPDM Washer. No Paint

  • Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 2" Under Head.
  • Metal Screws are painted to closely match many brands of metal roofing though color may vary.
  • Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc.
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • #10 Sheet Metal roofing screws are galvanized for corrosion resistance.
Check Stock

Metal Roofing Screws 250 10 x 1 Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood siding Screws EPDM Washer No Paint

  • Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 1".
  • Metal Screws are painted to closely match many brands of metal roofing though color may vary.
  • Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc).
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • No Paint/Galvanized Zinc screws go well with many types of gray, galvanized and other colors of roofing sheet metal.
Check Stock

#8 x 1/2\ Stainless Philips Pan Head Sheetmetal Screw (1/2\ to 2\ Lengths in Listing) 100 Sheet Metal Screws (#8 x 1/2 Inch)

  • Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1".
  • #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.
  • Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing.
Check Stock

Dripping In Chocolate

  • Built in easy to install 5 FT sections. 4" leg goes under the shingle with 1.5" hemmed edge on the fascia..
  • Matching 1.5" metal roofing screws, 1/4" hex bit driver, and gloves included with each order..
  • 75 degree angle fits most roof pitches with ease. Made from 26 Gauge metal roofing material with 40 year paint finish..
  • Custom sizes and shapes available. Shipping is free. All orders are shipped out same or next business day..
Check Stock

#14 Metal Roofing Screws 250 Screws x 1-1/2 Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood Sheet Metal Screws with EPDM Washer for Corrugated Roofing

  • Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1-1/2".
  • Polyurethane coated screw head is painted to closely match many brands of metal roofing (color may vary).
  • #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.
Check Stock

Ideal Security Inc. SKPHC Plastic Cap Washers for Nails or Screws Box of 500, 7/8 Inch, White, Count

  • Plastic Washers for Insulation: These white plastic caps help distribute the load of a fastener and are used in manufacturing, construction, automobile, and other industries.
  • Universal Compatibility: Our white plastic caps can be assembled with nail sizes #11 - #12 or with #6 - #8 screws.
  • Versatile Usage: Insulation washer is great for installing the roofing felt, rigid board insulation, sheeting, house wrap, and radiant and vapor barriers.
  • Specifications: These plastic cap washers have a diameter of 0.086" and come in a pack of 500.
Check Stock

National Nail 135055 250CT 1-Inch Plastic Cap Nail

  • Deformed ring shank for greater holding power electro galvanized to enhance corrosion resistance. Conforms to surfaces..
  • All hand driven caps are packaged as integral nail-cap units Cap nails round plastic burron cap ring shank lgth 1 inch count=250..
  • Flexible round head conforms to surface making it difficult for water to get under the cap. use to secure roofing felt, sheathing, building papers, etc..
  • Can be used for roofing felt, sheathing, polyethylene, roll roofing, re-roofing, chicken wire, wire lathe. Flexible plastic head..
  • Flexible round head conforms to surface making it difficult for water to get under the cap. Can be used for roofing felt, sheathing, polyethylene, roll roofing, re-roofing, chicken wire, wire lathe..
Check Stock

DEKTITE #1 DF101G Gray EPDM Flexible Round Pipe Flashing Dektite fits OD Pipe Sizes 1/4 - 2-1/2 - Metal Roof Jack Pipe Boot - Metal Roofing Pipe Flashing - Deks Dektite

  • Flashing Base Diameter is 4-3/4", Pipe Boot Fits From 1/4" to 2-1/2" Outside Pipe Diameter.
  • Continuous Service Temperature Ranges of -58F to 239F (EPDM).
  • Easily Customize Pipe Boot Size on the Job Site With Shears or Heavy Scissors.
  • Slide Flashing Down Pipe and Fasten Aluminum Collar To Roof With Metal Roofing Screws Every 1-1/2".
  • EPDM Rubber Boot with Flexible Base (Aluminum Collar) Seals Against Uneven Metal Roofing with Ease.
Check Stock

Oatey 14057 6.75 in. – 13.5 in. Master x 17 in. Base Roof Flashing, 7\ - 13\ pipe diameter, Black

  • Easily customized to accomodate a broad range of pipe diameters.
  • Non-fading EPDM collar provides maximum resistance to weathering caused by ozone and UV rays.
  • Engineered for profiled roofing systems at any pitch.
  • Use silicone sealant between base and surface, and secure with sheet metal screws.
  • Slides over pipe - for pitch to 45 degrees.
Check Stock

#14 Metal Roofing Screws(250) Screws x 2" Ivy/Forest Green Hex Head Sheet Metal Roof Screw. Self Starting/Tapping Metal to Wood Sheet Metal siding Screws -EPDM Washer. for Corrugated Roofing

  • Dimensions: Hex Head 5/16" - Shaft .25" - EPDM Washer ~9/16" - Head Height .2" Length 2-1/64" (UH).
  • Screw head is painted with a two part polyurethane for longer product life (Not Zinc).
  • Polymer coated roof screw head painted to closely match various brands of metal roofing - may vary.
  • #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
Check Stock

ZXFOOG Stainless Steel License Plate Screws-Rust Proof Car Tag Bolts for Fastening License Plate Cover, Front or Rear License Plate Frames with Screw Black Caps (M6 Screws+Chrome Caps)

  • 【Corrosion Resistant, Wear Resistant】：license plate hardware extends the life of your vehicle.Can replace the original bad bolts/old rusty screws of the license plate frame.8 pcs license plate holder fastener kit is definitely a complement to smoked plate shield/diamond/ skull/American flag/patriots license.The complete set of screws is suitable for license plate installations such as Jeep cherokee,jeep wrangler, Acura, Audi, BMW, Tesla,mustang,Honda,Toyota,Lexus,VW,Nissan,Ford.
  • 【Stainless Steel License Plate Cover Screws】: A set of 8 M6 Self tapping screws are made of 100% stainless steel, will never rust or corrode through decades of years.1/4-14-3/4" screws with 3/8" head license plate fasteners Fit most domestic Cars and trucks,motorcycles. Can install the front and rear mounting bracket/tag to most vehicle. Other popular metal screws will rust and damage your license plate holder and car body.
  • 【Easy To Install】:M6x20mm Standard screws size, will fit most American and Import cars.Great for cars, trucks, motorcycles and RVs. 4 solid Stunning Premium Smooth chrome Finish license plate screw caps are used to hide the screws,can better compatible with your license plate frame and license plate.Our upgraded....
Check Stock

Aootf Stainless Steel License Plate Screws-8PC M6X20mm Rust Resistant Stainless Steel Screw, Self Tapping License Plate Bolt Fastener for Securing License Plate Frame, Chrome Caps, Anti-Rattle Pad

  • Corrosion Resistant, Wear Resistant：license plate hardware extends the life of your vehicle.Can replace the original bad bolts/old rusty screws of the license plate frame.8 pcs license plate holder fastener kit is definitely a complement to smoked plate shield/diamond/ skull/American flag/patriots license.The complete set of screws is suitable for license plate installations such as Jeep cherokee,jeep wrangler, Acura, Audi, BMW, Tesla,mustang,Honda,Toyota,Lexus,VW,Nissan,Ford.
  • Stainless Steel License Plate Cover Screws: A set of 8 M6 Self tapping screws are made of 100% stainless steel, will never rust or corrode through decades of years.1/4-14-3/4" screws with 3/8" head license plate fasteners Fit most domestic Cars and trucks,motorcycles. Can install the front and rear mounting bracket/tag to most vehicle. Other popular metal screws will rust and damage your license plate holder and car body.
  • Easy To Install: M6x20mm Standard screws size, will fit most American and Import cars.Great for cars, trucks, motorcycles and RVs. 4 solid Stunning Premium Smooth chrome Finish license plate screw caps are used to hide the screws,can better compatible with your license plate frame and license plate.Our upgraded license plate fr....
Check Stock

Metal Roofing Screws 250 10 x 1-1/2 Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood siding Screws EPDM Washer No Paint

  • Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 1-1/2" Under Head.
  • Metal Screws are painted to closely match many brands of metal roofing though color may vary.
  • Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc).
Check Stock