Categories

Best Metal Roofing Tiles

#8 x 1/2\ Stainless Philips Pan Head Sheetmetal Screw (1/2\ to 2\ Lengths in Listing) 100 Sheet Metal Screws (#8 x 1/2 Inch)

  • Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1".
  • #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.
  • Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing.
Check Stock

Ames Maximum Stretch - 4.6 Gallon Waterproof Sealant Membrane - Perfect For Roofing, Repairs, Concrete, EPDM & Wood - Liquid Rubber Sealer - Up To 650% Elastic - Made in USA

  • Ames Maximum-Stretch is a white, elastomeric, acrylic, rubberized roof coating & sealant with 650% elongation to resist cracking & peeling. With 88% light reflectivity, the bright white finish reduces surface temperatures resulting in lowered cooling costs..
  • Ames Maximum-Stretch adheres to metal roofing, tar, rolled roofs and more. Use as a RV roof sealant, waterproof sealant, rubber roofing material and more. Designed for low-slope roof maintenance..
  • 650% elongation - does not flake, chip or peel - elastomeric and rubberized coating and sealant. Rubber roofing material is 88% light reflective resulting in lowered cooling costs. Brush, roll or spray on!.
  • Non-toxic, eco-friendly, low VOC & made in the USA.
  • 4.6 Gallon - Tintable White - Our waterproof roof sealant is packaged in 5 gallon Pail. Designed for low-slope roof maintenance on metal roofing, built-up roofing, rolled roofing and more..
Check Stock

#14 Metal Roofing Screws 250 Screws x 1-1/2 Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood Sheet Metal Screws with EPDM Washer for Corrugated Roofing

  • Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1-1/2".
  • Polyurethane coated screw head is painted to closely match many brands of metal roofing (color may vary).
  • #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.
Check Stock

Metal Roofing Screws 250 12 x 2 ZINC/NO Paint Hex ReGrip Sheet Metal Roof Screw Sharp Point Metal to Wood siding Screws.

  • #12 Sheet Metal ROOFING SCREWS.  Sharp Point ReGrip Screws. 5/16" Hex Head, ~9/16" Washer.
  • 250 COUNT Metal-to-wood roofing screws are galvanized and zinc coated to prevent rusting.
  • Hex washer head, sharp point roof screw with EPDM washer seal, seals roofing panel to screws..
  • Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
  • Galvanized Screw is Non-Painted and gets it's Color from the Galvanizing Process and is natural gray.
Check Stock

Metal Roofing Screws: (250) 10 x 2\  Galvanized Hex Head Sheet Metal Roof Screw. Self Starting Metal to Wood siding Screws. EPDM Washer. No Paint

  • Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 2" Under Head.
  • Metal Screws are painted to closely match many brands of metal roofing though color may vary.
  • Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc.
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • #10 Sheet Metal roofing screws are galvanized for corrosion resistance.
Check Stock

Metal Roofing Screws 250 10 x 1 Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood siding Screws EPDM Washer No Paint

  • Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 1".
  • Metal Screws are painted to closely match many brands of metal roofing though color may vary.
  • Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc).
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • No Paint/Galvanized Zinc screws go well with many types of gray, galvanized and other colors of roofing sheet metal.
Check Stock

1 Pail, 4 Gallon Each of Roofing Latex Bonding Glue Adhesive. 100% Full Refund Guarantee Available

  • 1 - 4 gallon pail of ROOFING latex Bonding Adhesive, covers 350 sq. ft. Trowel application is the recommended application as per the instructions as a ONE surface WET LAMINATE. However, if you wish to use a paint roller, we recommend using a 9" fine nap paint approved roller. If you use the roller, and not a trowel, you need to put the adhesive on BOTH surfaces and let TACK dry for 5 minutes or so, like a 2 sided solvent contact adhesive, depending on weather and heat conditions..
  • Used to adhere construction roofing membrane to surface, Not recommended to be used in temperatures lower than 50*. Temperature needs to be above 50* for 24 hours for full cure..
  • Latex NON HAZ MAT Bonding Adhesive. Top Quality. 100% FULL REFUND GUARANTEE.
  • Bond EPDM, TPO, and PVC Roofing to Wood, OSB, Plywood, Metal and BUR Roofing.
  • Use as a SINGLE surface wet laminate adhesive to bond your roofing membrane to the substrate. This is a BONDING Adhesive to adhere or bond the EPDM or TPO to a substrate of wood, plywood, OSB or metal. This is NOT a seaming product that will seam EPDM to EPDM or TPO to TPO, you must use a SEAMING product like black seaming adhesive or vulcanizing seaming tape which we have available for that type of application..
Check Stock

Dripping In Chocolate

  • Built in easy to install 5 FT sections. 4" leg goes under the shingle with 1.5" hemmed edge on the fascia..
  • Matching 1.5" metal roofing screws, 1/4" hex bit driver, and gloves included with each order..
  • 75 degree angle fits most roof pitches with ease. Made from 26 Gauge metal roofing material with 40 year paint finish..
  • Custom sizes and shapes available. Shipping is free. All orders are shipped out same or next business day..
Check Stock

IVY Classic 11163 Roofing Knife with Blade 1/Card

  • ALL METAL CONSTRUCTION: heavy-duty metal construction. Plated for rust resistance..
  • VERSATILE: cuts roofing material and shingles. Knife swivels open for blade change after removal of wing nut..
  • ROOFERS BLADE INCLUDED: retractable bowtie shaped blade adjusts to exact position and depth of cut..
  • COMPATIBILITY: fits Ivy Classic 11176 roofers blade and other roofing blades.
  • BLADE SPECIFICATIONS: high-carbon steel bowtie shaped with 4 cutting edges, blade thickness: .024"..
Check Stock

Strongman Tools Heavy Duty Aluminum Angle Measuring Ruler Angle Finder Template Ideal Gift for The DIY Lover Craftsman Carpenter Construction (Includes Pouch + Pencil) Woodworking Tool

  • ✔ INDUSTRIAL GRADE – Our Angle Tool is made from premium Aluminum which won’t rust, break and will LAST LONGER! Loved by plumbers, builders, construction workers, woodworking professionals, roofers, carpenters, tilers and many more. Perfect for tiling, roofing or any type of DIY projects..
  • ✔ TIME SAVER – Easily adjust with the 4 screw bolts, create custom stencils for brick, wood, tiles, flooring, metal, crafts and much more saving you time and getting jobs done quicker!.
  • ✔ MONEY SAVER – Our tool will help you to create simple templates which you can transfer, saving you money on craft supplies & materials. Create your journals and books quicker, loved by bookbinders and craft hobbyists.
  • ✔ PERFECT GIFT – One of the most popular tool gifts for Men, Women, Dad, Grandad, Mum or anyone who loves DIY and comes with a velvet pouch, builders pencil and a easy to wrap box.
  • ✔ LIFETIME GUARANTEE – Your purchase is protected, return at any time for a refund. What are you waiting for?.
Check Stock

Roof Protector Underlayment Roll - 42\ x 286'

  • Lightweight for easy handling and installation with 90 day UV exposure.
  • Superior tear resistance compared to roofing felt for increased durability.
  • Ideal for for sloped (003e= 2:12) commercial and residential roofs and roofing applications under asphalt shingles or metal cladding.
Check Stock

Uni-Solar PVL-136 Power Bond PVL 136 Watt 24 Volt 216" x 15.5" inches. Flexible Solar Panel. Easiest to Install Peel & Stick.

  • Easy to install adhered directly to metal roofing pans, no racking system is required, laminates and metal roofing can be installed in one step.
  • there are no penetrations to the roof deck It has flexible.
  • Powerbond, flexible solar panel. Peel & Stick..
  • Measures 216-inches in length by 15.5-inches width by 0.2-inches in height.
Check Stock

DEKTITE #2 (DFE102B) Square Black EPDM Flexible Pipe Flashing, Roof Jack, Pipe Boot Flashing Dektite (for OD Pipe Sizes 1/4\ - 3\)

  • Dektite Base Seals Against Uneven Metal Roofing with Ease. Pipe Flashing Will Not Break or Crack..
  • This Pipe Flashing Boot Made By Deks is Made of EPDM for Long Life Even at Extreme Temperatures.
  • Black Dektite Pipe Flashing is Rated for Continuous Service Temperature Ranges of -58˚F to +239˚ F.
  • EPDM Rubber Boot with Flexible Base (Aluminum Collar). Pipe Boot Fits 1/4" to 3" Pipe OD..
  • Metal Roofing Pipe Flashing Boot is Designed for on-site Adjustment with a base of 7" x 7".
Check Stock