Categories

Best Metal Shaping Machinery

Diamond Brite Paint 46000 1-Gallon Aluminum Paint

  • Good For properly prepared radiators, chainlink fences and banisters, metal cabinets and shelves, machinery and metal roofs.
Check Stock

All States Ag Parts Parts A.S.A.P. Propane Tank Paint – Gloss White Gallon

  • Good For properly prepared radiators, chainlink fences and banisters, metal cabinets and shelves, machinery and metal roofs.
Check Stock

Krylon K05587007 COLORmaxx Spray Paint and Primer for Indoor/Outdoor Use Metallic Aluminum

  • Good For properly prepared radiators, chainlink fences and banisters, metal cabinets and shelves, machinery and metal roofs.
Check Stock

Shotgun Shell - Leather Fence Row Camo Trifold Wallet

  • Comes in a 5-gallon container that makes up to 128 gallons of cleaner.
  • Loaded with powerful solvents in a low-foaming, easy-to-rinse formula.
  • Wipes out industrial levels of grease on machinery and surfaces.
  • Quickly and efficiently cleans unfinished concrete and metal, so it’s perfect for use on heavy machinery, engine parts and tools.
  • Helps you remove grease from shop floors, work surfaces and other industrial settings.
Check Stock

Awoco 36" Super Power 2 Speeds 1200CFM Commercial Indoor Air Curtain, UL Certified - 120V Unheated - Free Door Switch

  • Fire proof and anti-erosive metal case, easy to clean slim body..
  • Motor: Adopting the technology of German electrical machinery, it runs smoothly with reduced low noise. Fan Wheel: German electrical machinery design, made of high-tech ABS, powerful wind-force.
  • Easy to open, convenient design which does not use screws.Optimized electrical machinery, reliable and safe runs for 5,000 consecutive hours..
  • 110V-120V 60Hz 450W, a HI/LO/OFF switch on the air curtain, also comes with a FREE heavy duty door switch. Air Volume: 1200 CFM, Noise: 49 dB.
  • Overall size: 35-1/2″(Length) x 10-3/8″(Height) x 8-5/8″(Depth, Front to Back). UL listed..
Check Stock

KSEIBI 271150 Engineers Machinist Blacksmith Strike Club Hammer (Wood Handle, 4.40 lb / 2000 grams)

  • The Blacksmith hammer head is made of high-carbon steel with heat treatment, high hardness, good toughness, and durability, which makes it perfect for any project..
  • This cross peen hammer handle is made of high-quality wood handle making this metal working hammer an ideal tool for all metal works..
  • This blacksmithing hammer is an essential tool for forging and can help you finish and get the job done in any metal fabrication tasks, home improvement, or construction sites..
  • A wide variety of projects can be finished with this engineer hammer such as striking, shaping, and bending unhardened metal or shaping block, brick, and stone..
  • The 4.40 lb metal forge hammer head has two different striking surfaces, an anti-rust polished black surface, with a well-balanced 14-inch handle Long.
Check Stock

Capri Tools Dead Blow Ball Peen Hammer, 36 oz

  • An optimal machinist hammer that combines the effortless positive strike of a dead blow hammer with hardened steel domes for shaping and forging metal.
  • Steel face used for striking, shaping, flattening and expanding metal.
  • Shot-filled dead blow action reduces rebound while providing maximum striking force, saving your arm and wrist from strain and capable of giving the force you need in tight spots.
  • Durable premium polyurethane construction.
Check Stock

Lacerta Files [Explicit]

  • PRODUCT SIZE -- 6" flat file total lenth 7.3inch width 0.6inch thickness 0.16inch.
  • QUALITY MATERIAL -- Each file tool is made of high carbon steel, high frequency quenching, high hardness, ensuring strength and durability for long-lasting use..
  • WIDE APPLICATION -- Our hand file can be used for metal deburring,wood rasp,processing hard wood, metal chamfering,sanding sticks for plastic models,tooth file for shaping,trimming and chamfering, polishing rough machining, heavy duty usage. Suitable for shaping metal, wood, plastic, plaster, wallboard, glass and etc. Ideal for wood carving, stone carving, remodeling, boat repair, pattern shops, foundries, etc..
  • EXQUISITE STRUCTURE -- The fine-grained texture double-cut tooth structure makes it a great multipurpose tool for professionals and DIYers alike.
  • AFTER-SALES SERVICE -- We aim to provide the best service to our customers. Just try it, and if you have any questions about our product, please feel free to contact us. We will refund or replace your purchase..
Check Stock

KSEIBI 271450 Machinist Engineers Hammer, Forged Steel Cross Peen Sheet Metal Hammer, Blacksmith Forging Tools (Soft Grip Handle, 2.20 lb / 1000 grams)

  • The Blacksmith hammer head is made of high-carbon steel with heat treatment, high hardness, good toughness, and durability, which makes it perfect for any project..
  • This cross peen hammer handle is made of high-strength fiberglass covered with non-slip rubber making this metal working hammer an ideal tool for all metal works..
  • This blacksmithing hammer is an essential tool for forging and can help you finish and get the job done in any metal fabrication tasks, home improvement, or construction sites..
  • A wide variety of projects can be finished with this engineer hammer such as striking, shaping, and bending unhardened metal or shaping block, brick, and stone..
  • The 2.20 lb metal forge hammer head has two different striking surfaces, an anti-rust polished black surface, with a well-balanced 14-inch handle.
Check Stock

Firelong Basketball Resistance Band Training Dribbling Fitness Single Circle 6 Levels Strong Heavy Duty Professional Exercise Bands Natural Latex 41 Inch Loop 15-25lbs

  • Multiple Choice : 6 Levels strength training bands with different colors range from 15lbs to 180lbs fit for novice to professional athlete.Note : just....
  • Professional Basketball Training Bands :Enhance the strength and stability of various parts of the body.Can replace hard machinery, reduce the damage....
  • Durable Bands : Made of high-quality natural latex material built to last for very long time..
  • Multifunction Stretch Bands: Perfect for Training and physical improvement,home workout,linear variable resistance training with weight bars or....
  • Wide Application: Not easy to snap,rack and deform,rich elastic,can be used in fitness, sports, yoga exercise, the effect of thin body shaping,....
Check Stock

OEM Upgraded GE Genteq Carrier Bryant Payne 1/4 HP 230v Condenser Fan Motor 5KCP39EGS070S

  • High Working Efficiency: Runs at 3 HP, with a maximum speed of 3450 RPM, synchronous speed: 3600 RPM, Voltage: 115/230V 60 HZ, Frame: 56. Shaft Diameter: 5/8" (1.6cm), Shaft Length: 1.88" (4.8cm)..
  • Powerful AC Motor: Compact and small sized AC motor featuring output 3HP, 56 Frame and single phase. Robust and reliable metal material shell protect the inner circuit from thermal overloading..
  • Open Dripproof Fan: Big fan at one end cools the motor in hours' running, even in dusty or damp environments. Reducing energy costs or overheads, reducing running temperature, increasing winding lifetimes..
  • Wide Application: The electric motor is suitable for air compressors, medical equipment refiners, metal cutting machine tools, pumps, fans, transport machinery mixers, food machinery, etc..
  • Please note" Mophorn is a sub-brand of VEVOR", You can buy our air compressor motor without worries. Do not hesitate to contact us if you have any problem..
Check Stock

Sanding Tools Abrasive Waterproof Wet/Dry Sticky Sandpaper for Wood,Metal and Automotive Polishing 100pcs

  • Box of 20– (400Grit,600Grit,800Grit,1000Grit,2100Grit) LONG-BOARD PSA Premium Sanding Sheets – Made with Fused Zirconia Alumina Corundum for a sharp cut and uniform finish..
  • ANSAI sanding Sticky back glue sandpaper are precut to standard File Boards at 0.78" x 3.14" and are conveniently packed 20 to a box..
  • Ideal for: Shaping Body Filler, Removing Paint, Rough Feather Edging, Primer/Metal Sanding It delivers a fast, exceptionally long lasting cut with a consistent scratch pattern for Auto Body and painting, wood working, metal working, Fiberglass, Primers and Plastics ideal for: Shaping Body Filler, Removing Paint, Rough Feather Edging, Primer/Metal Sanding, Hobby working..etc...
  • Provides Exceptional Sanding Performance, so you can get the job done fast, saving you time and money..
Check Stock

Utoolmart Metal Ring Sizer Mandrel Bracelet Stick Gauge Measuring Jewelry Tool Hammer Set Jewelry Tool

  • 【Jewelry Rubber Mallet】- Jewelry mallet will provide perfect strike without scratching or damaging the surface of materials. Rubber head would not leave traces on the jewelry or damage your jewelry. The head diameter: 25mm. Fine workmanship and high quality..
  • 【Wood Ring Mandrel】- Wood ring mandrel is perfect for ring making and shaping, fix bent rings.great for holding rings for polishing and sanding..
  • 【Metal Ring Mandrel】- Utoolmart metal ring mandrel is made of steel, US size 0-15, come in half sizes.The ring sizes are clearly marked, easy to use and accurate to the size. Great for professional and beginners..
  • 【Perfect Performance】- This is a nice basic ring adjuster repair kit. Great for someone get into jewelry-making as hobby and on-line shopper for ring size determining. Good for fix bent rings, making the bent ring round again..
  • 【Ring Making and Shaping Tool Kit】- Package Include: Wood Ring Mandrel + Jeweler Rubber Hammer + Metal Ring Mandrel +Metal Ring Mandrel..
Check Stock