Categories

Best Metal Shim

Howards Cams 96210-30-1: Valve Spring Shim; 1.250 .030

  • Valve Spring Shim Outside Diameter: 1.250.
Check Stock

9 Piece Punch & Die Set Metal Punch Tool for Cutting Coins Metal Plastic-with Clear Acrylic Guide

  • See What You Cut- Clear plate guide for easy alignment and placement Accurate to within 0.002 inch.
  • Precise Cuts- Hole punch set made from precision ground hardened alloy steel- 9 pieces for a variety of hole sizes.
  • Backed by Amazon's A-Z Guarantee with Prime available and a 1 year manufacturer guarantee.
  • Many Uses- Works well for metal shim, brass shim stock, sheet styrene, leather punch, paper, decal stock, coin ring making, and model ship building.
  • Well Oiled And Ready To Cut- Normal to see grease on the unit Capacities: 20 Gauge Steel Sheet, 13 Gauge Aluminum & Brass.
Check Stock

Game Room Guys Rubber Pool Table Leg Shims Varied Sizes - Set of 12

  • LEVEL YOUR POOL TABLE - Mix and Match Shims to Level Your Pool Table.
  • VARIED THICKNESS - (3) 1/32 Rubber Shim, (3) 1/16 Rubber Shim, (3) 1/8 Rubber Shim, (3) 1/4 Rubber Shim.
  • GREAT FOR BARS AND GAME ROOMS - Perfect for Commerical and Home Use.
  • LONG-LASTING RUBBER - Rubber Lasts Longer than Wood Shims.
Check Stock

Game Room Guys Rubber Pool Table Leg Shims Varied Sizes -Set of 8

  • LEVEL YOUR POOL TABLE - Mix and Match Shims to Level Your Pool Table.
  • VARIED THICKNESS - (2) 1/32 Rubber Shim, (2) 1/16 Rubber Shim, (2) 1/8 Rubber Shim, (2) 1/4 Rubber Shim.
  • GREAT FOR BARS AND GAME ROOMS - Perfect for Commerical and Home Use.
  • LONG-LASTING RUBBER - Rubber Lasts Longer than Wood Shims.
Check Stock

StewMac Acoustic Guitar Neck Shims Maple - Set of 10

  • Fitting an acoustic guitar neck into a dovetail joint is precise work - many times you need to shim a loose side of a dovetail when fitting the neck.
  • This wafer thin shim stock is well made for a clean fit, and is just large enough to create a taper or wedge.
  • Maple shim stock is a problem solver in a busy repair shop, and we found this size has a million uses around the shop—from shimming a saddle, to....
  • Each shim is a 2" x 5" rectangle, approximately 0.022" (0.55mm) thick.
Check Stock

12 Pcs Metal Shim Stock 316 Stainless Steel Sheet Shim Flat Sheets of Metal for Kitchen DIY Craft Making Marine Application 0.001 0.0015 0.002 0.003 0.004 0.005 Inch Thick 6 x 12 Inch

  • 316 Stainless Steel: this 316 stainless steel shim stock is made of 316 stainless steel material, which has corrosion resistance, rust resistance, high temperature resistance performance.
  • Wide Applications: this stainless steel sheet shim is bendable that can be machined or cut into various parts, such as metal shims, washers, spacers and more, and you can DIY crafts as well.
  • Proper Sizes: this stainless steel sheet metal is approx. 30.48 x 15.24 cm/ 12 x 6 inches (length and width), with various thickness, including 0.001 inch, 0.0015 inch, 0.002 inch, 0.003 inch, 0.004 inch, 0.005 inch, which can meet your different uses.
  • Sufficient Quantity: please be careful not to cut your fingers and open the package carefully.
  • There are 12 pieces of stainless steel metal sheets in the package, enough for your various uses and replacements, 6 different thicknesses, 2 pieces each.
  • Practical Gifts: you can give this set of sheet of stainless steel to your family, colleagues and friends, and they will be very happy to receive such a practical and useful gift.
Check Stock

KS E20 Bicycle Dropper Seatpost - 30.9 425/125mm - C228-125-30.9

  • Material: bicycle Seatpost Shim is made of high quality 6061 aluminum alloy, CNC machining CD texture surface ,anti-rust and durable.
  • Feature:Use this bike post shim, 30.9 ID Seat Post shim can be converted to 31.6 bike seat post, bike seatpost shim can help you change the bicycle....
  • Size: 31.6 to 30.9 seatpost shims. Length: 100mm..
  • Tips: Please check your bike frame seat tube outside diameter. Measure the inside diameter of your old clamp. Or measure the outside diameter of your....
  • Application: Bicycle Seatpost reducer matches well with most bicycles, such as MTB ,BMX ,mountain bike, road bike,and more, you can easily adjust the....
Check Stock

Brass Strip Brass Shim Stock Assortment 1 Width x 6 Length 0.002 0.004 0.006 0.008 0.012 and 0.016 Thickness 6 Pieces

  • With 6 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • Brass shim stock assortment size: 6" Length x 1" Width, 0.002", 0.004", 0.006", 0.008", 0.012" and 0.016" Thickness.Nicely polished up..
  • Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • Metal sheets plates widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock

6 Pieces Brass Strip Brass Shim Stock Assortment 1 Width x 12 Length 0.002 0.004 0.006 0.008 0.012 and 0.016 Thickness,Brass Sheet Metal Shims

  • ✔ If you happen to need some brass shim stock, you do not have to drive mile to hardware store to find these, our brass shim stock assortment with 6 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • ✔ Brass flat strip is made of brass material,has nice bend-ability and good processability, excellent conductivity, you can use it according to your requirement..
  • ✔ Brass strip has high strength, high hardness. It can still work well under hot condition and has good corrosion resistance..
  • ✔ Brass shim stock assortment size: 12" Length x 1" Width, 0.002", 0.004", 0.006", 0.008", 0.012" and 0.016" Thickness. Nicely polished up..
  • ✔ Brass shim stock widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
Check Stock

Brass Sheet Brass Shim Stock Assortment 6 Length x 4 Width 0.001 0.002 0.003 0.005 and 0.01 Thickness Metal Sheets Plates 5 Pieces

  • With 5 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • Brass shim stock assortment size: 6" Length x 4" Width, 0.001", 0.002", 0.003", 0.005" and 0.01" Thickness.Nicely polished up.
  • Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • Metal sheets plates widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock

Brass Sheet Brass Shim Stock Assortment 6 Length x 3 Width 0.002 0.004 0.006 0.008 ,0.012 and 0.016 Thickness Brass Shim Stock 6 Pieces

  • With 6 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • Brass shim stock assortment size: 6" Length x 3" Width, 0.002", 0.004", 0.006", 0.008",0.012" and 0.016" Thickness. Nicely polished up..
  • Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • Metal sheets plates widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock

12 Pieces Brass Strip Brass Shim Stock Assortment 1 Width x 6 Length 0.002 0.004 0.006 0.008 0.012 and 0.016 Thickness Metal Shims Brass Sheet

  • ✔ ---- With 6 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • ✔ ---- Brass shim stock assortment size: 6" Length x 1" Width, 0.002", 0.004", 0.006", 0.008",0.012" and 0.016" thickness, 2 pieces for each thickness..
  • ✔ ---- Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • ✔ ---- Metal shims brass sheet widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • ✔ ---- If you are a lover of DIY crafts, you should prepare this brass strip, because it is indeed widely used and multifunctional, you will definitely use it..
Check Stock

Hot Cams 1.90mm 5 Piece Shim Kit 5PK948190 for Yamaha YZ Dirt Bikes

  • 1. 90mm 5 piece shim refill, perfect to refill your Hot Cams shim kit.
  • For Models: 2014-2016 Yamaha YZ 250F BIKE, 2015- 2016 Yamaha YZ 250FX BIKE.
  • Laser etched size on top of shim for quick easy identification.
Check Stock