Leviton MS303-DSW 30 Amp, Back & Side Wiring, White & Bell PTC100GY 1-Gang Toggle Switch Nonmetallic Weatherproof Cover, Gray
- Product 1: Accepts back or side wiring, terminal clamps or ring terminals.
- Product 1: Oversized toggle provides clear actuation feedback and long-lasting durability.
- Product 1: Nickel-plated #10 triple-combination terminal screws for corrosion resistance.
- Product 2: For use with PVC single gang field service boxes.
- Product 2: Durable High-Impact Polycarbonate construction.
Check StockNICHE High Strength Rear Left and Right CV Axle Kit for 2003-2008 Yamaha Grizzly 660 5KM-2530U-13-00
- Includes Rear Left Axle, Rear Right Axle.
- Rear-Left CV Axle Compatible with Yamaha 5KM-2530U-13-00, 5KM-2530W-12-00, Rear-Right CV Axle Compatible with Yamaha 5KM-2530T-13-00, 5KM-2530V-12-00.
- Compatible with: Yamaha 2003-2008 Grizzly 660, 2005-2008 Grizzly 660 Hunter Edition, 2003 Grizzly 660 Metallic Titanium Limited Edition, 2003-2004, 2006 Grizzly 660 Hardwoods Hunter Edition, 2003-2005.
- 25% Larger Joint and Shaft Diameters When Compared to Factory Specifications.
- Durable Neoprene Boots Ultra-Low-Profile Boot Clamps Prevent Moisture or Water Damage.
Check Stock
18PCS Hose Clamps Stainless Steel Sheboren Clamping Range 1/2\ to 1-1/4\(12mm-32mm), 1/2’' Hose Clamps, 3/4'', 1’’ Hose Clamps SAE 12 Worm Gear Hose Clamps for Automotive Plumbing
- 【Hose Clamps Specification:】With 1/2’’ (12.7mm) band width, 1/4’’ (6.35mm) hex head screw, these SAE size #12 hose clamps have adjustable clamping range of 1/2" to 1-1/4"(12mm-32mm), fit hoses within this range, great as 1/2 inch hose clamps, 3/4 inch hose clamps, 5/8 inch hose clamps,7/8 inch hose clamps, 1 inch hose clamps, 1 1/4 inch hose clamps etc. The average torque of the hose clamps is 10.5N, much higher than the standard torque 6.78N..
- 【Durable Quality& Premium Materials:】All the hose clamps including the band, housing and screw are made of 304 stainless steel. These worm gear hose clamps are salt resistant, acid resistance, anti rust, anti-corrosion, waterproof and oil proof. These SAE standards compliant hose clamps are sturdy, strong and durable, you’ll never need worry about rusting or breaking..
- 【Effortless Installation& Easy to Operate:】These 1 inch hose clamps are of beautiful shape, precision polishing with smooth surface without burrs. You can install the hose clamps without any effort: use a slotted screwdriver to loosen or tighten the screw of hose clamps then adjust the size, thread the pipes through the hose clamps, tighten the screw and hose clamps in place..
- 【Wide Applications, Save Time and Money:】These....
Check Stock
20PCS Hose Clamps Stainless Steel Sheboren Clamping Range 1/2\ to 1-1/16\(12mm-27mm), 1/2’' Hose Clamps, 3/4'', 1’’ Hose Clamps SAE #10 Worm Gear Hose Clamps for Automotive Plumbing
- 【Hose Clamps Specification:】With 5/16’’ (8mm) band width, 1/4’’ (6.35mm) hex head screw, these SAE size #10 hose clamps have adjustable clamping range of 1/2" to 1-1/16"(12mm-27mm), fit hoses within this range, great as 1/2 inch hose clamps, 3/4 inch hose clamps, 5/8 inch hose clamps,7/8 inch hose clamps, 1 inch hose clamps etc. The average torque of the hose clamps is 9.5N, much higher than the standard torque 6.78N..
- 【Durable Quality& Premium Materials:】All the hose clamps including the band, housing and screw are made of 304 stainless steel. These worm gear hose clamps are salt resistant, acid resistance, anti rust, anti-corrosion, waterproof and oil proof. These SAE standards compliant hose clamps are sturdy, strong and durable, you’ll never need worry about rusting or breaking..
- 【Effortless Installation& Easy to Operate:】These 1 inch hose clamps are of beautiful shape, precision polishing with smooth surface without burrs. You can install the hose clamps without any effort: use a slotted screwdriver to loosen or tighten the screw of hose clamps then adjust the size, thread the pipes through the hose clamps, tighten the screw and hose clamps in place..
- 【Wide Applications, Save Time and Money:】These 3/4’’ hose clamps can....
Check StockPontoon Boat Square Rail Mount Fender Bumpers Hanger/Adjuster/Clip for Docking,4 Pack
- 【FUNCTION】Boat fender clips (Pack of 4) Designed to both 1.25" and 1” square tube rails on pontoon boats, Clamps securely to square tubing. If....
- 【FEATURES】Pontoon boat square rail fender hangers fit boat lines/ropes up to 3/8 inch, Go through the hole in the clip, tie a knot at the end of....
- 【EASY TO USE】Marine boat fender adjuster benefits by design they will make moving/adjusting boat fenders much easier and quicker, quickly to suit....
- 【Material】Pontoon boat bumper clips Constructed from durable ABS plastic, Not easy to break, Non-metallic the material won’t scratch or stain....
- 【NO MORE WORRIES】Dock bumper fender holder provides optimal protection for your boats. Whether you’re anchoring in river currents or docking at....
Check Stock
Winlong Stainless Steel Hose Clamps - 24 Pack Worm Gear Drive Hose Clamps Micro Size 4 Clamping Range 1/4 Inch to 5/8 Inch 6mm-16mm for Automotive Plumbing 1/4 Hose Clamps 1/2 Hose Clamps
- Premium Materials: Winlong hose clamps are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. Winlong stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
- Winlong hose clamps are reliable, strong, reusable and durable..
- Remarkable Performance: Winlong size 4 stainless steel 6-16mm hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The size #4 hose clamps have clamping range from 1/4 inch to 5/8 inch (from 6mm to 16mm), great for hose or pipes within this range, perfect as 1/4 inch hose clamps, 3/8 inch hose clamps, 7/16 inch hose clamps, 1/2 inch hose clamps etc. The average torque of the hose clamps is 3.9N, much higher than the standard torque 2.26N..
- Effortless Installation: Winlong hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. Winlong worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burrs..
Check StockNewhouse Electric Adjustable Electrical Box for Light Fixtures and Ceiling Fans, 14 to 24.5 inches, 20cu in, UL Rated, Gray (AGC20HG)
- Electrical outlet box measures 2.75 x 3.5 x 2.25 and is adjustable from 14 to 24.5 inches in hanging diameter. Box is 20 cubic inches in volume..
- Ceiling box is listed for use with non-metallic sheathed cable in accordance with Article 314 of the National Electrical Code.
- Built-in cable clamps hold wires firmly in place in this drywall outlet box.
- Compares to Carlon electrical boxes. UL and fire safety rated.
- Great electric box for hanging ceiling fans and light fixtures.
Check Stock
WINL Stainless Steel Hose Clamps - 16 Pack Worm Gear Drive Hose Clamps SAE 16 Clamping Range 3/4 Inch to 1-1/2 Inch (19mm-38mm) for Automotive Plumbing, 3/4'', 1'', 1 1/4'' Hose Clamps
- Premium Materials: WINL SAE 16 hose clamps of 19mm-38mm are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
- WINL hose clamps are reliable, strong, reusable and durable..
- Remarkable Performance: WINL stainless steel hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The SAE size #16 hose clamps have clamping range from 3/4 inch to 1-1/2 inch (from 19mm to 38mm), great for hose or pipes within this range, perfect as 3/4 inch hose clamps,7/8 inch hose clamps,1 inch hose clamps,1 1/5 inch hose clamps, 1 1/4 inch hose clamps etc. . The average torque of the hose clamps is 10.5N, much higher than the standard torque 6.78N..
- Effortless Installation: WINL size 16 hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without ....
Check Stock
WINL Stainless Steel Hose Clamps - 22 Pack Worm Gear Drive Hose Clamps Micro Size 6 Clamping Range from 5/16 Inch to 7/8 Inch 8mm-22mm for Automotive Plumbing 1/2 Hose Clamps 3/4 Hose Clamps
- Premium Materials: WINL size 6 hose clamps of 8mm-22mm are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
- WINL hose clamps are reliable, strong, reusable and durable..
- Remarkable Performance: WINL stainless steel hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The micro size #6 hose clamps have clamping range from 5/16 inch to 7/8 inch (from 8mm to 22mm), great for hose or pipes within this range, perfect as 3/8 inch hose clamps, 7/16 inch hose clamps, 1/2 inch hose clamps, 5/8 inch hose clamps, 3/4 inch hose clamps etc. The average torque of the hose clamps is 3.9N, much higher than the standard torque 2.26N..
- Effortless Installation: WINL size 6 hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burr....
Check Stock
WINL Stainless Steel Hose Clamps - 16 Pack Worm Gear Drive Hose Clamps SAE 10 Clamping Range of 1/2'' to 1-1/16'' (13mm-26mm) for Automotive Plumbing, ,1/2 Inch, 3/4 Inch,1 Inch Hose Clamps
- Premium Materials: WINL size 10 hose clamps of 13mm-26mm are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
- WINL hose clamps are reliable, strong, reusable and durable..
- Remarkable Performance: WINL stainless steel hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The SAE size#10 hose clamps have clamping range from 1/2 inch to 1-1/16 inch (from 13mm to 26mm), great for hose or pipes within this range, perfect as 1/2 inch hose clamps, 3/4 inch hose clamps, 7/8 inch hose clamps, 1 inch hose clamps etc.. The average torque of the hose clamps is 9.5N, much higher than the standard torque 6.78N..
- Effortless Installation: WINL size 10 hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burrs..
Check StockWINL Stainless Steel Hose Clamps - 24 Pack Worm Gear Drive Hose Clamps Micro Size 4 Clamping Range 1/4 Inch to 5/8 Inch 6mm-16mm for Automotive Plumbing,1/4 Inch Hose Clamps 1/2 Inch Hose Clamps
- Premium Materials: WINL hose clamps are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
- WINL hose clamps are reliable, strong, reusable and durable..
- Remarkable Performance: WINL size 4 stainless steel 6-16mm hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The size #4 hose clamps have clamping range from 1/4 inch to 5/8 inch (from 6mm to 16mm), great for hose or pipes within this range, perfect as 1/4 inch hose clamps, 3/8 inch hose clamps, 7/16 inch hose clamps, 1/2 inch hose clamps etc. The average torque of the hose clamps is 3.9N, much higher than the standard torque 2.26N..
- Effortless Installation: WINL hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burrs..
- Wide Applications: WINL stainless stee....
Check StockAA-Racks Model X27 Rain-Gutter Van Roof Racks Square 3Bar Set with Ladder Stoppers, Full (White)
- Our unique three-bolt lock design makes it compatible to most van rain gutters, while keeping the stability for the loads.
- The x37-st features the adjustable middle bar design which fits the new model van with uneven roof.
- The protective rubber covers on both upright clamps prevent metallic friction on the rain gutters, which can also further reduce chance of rusting.
- The X27 is built with the thickness of Gauge Grade No. 10 (3.78mm actual steel thickness) for heavy-duty purpose.
- The X27 also comes with four Adjustable Ladder Stoppers.
- (two for each bar), they provide the convenience and security for multiple ladder carrying.
Check Stock
SHALL Pink Magnetic Wristband, Mother's Day Gifts for Women, Tool Gifts for Holding Screws, Nails, Drill Bits, Wood Pencil - Cool Gadgets Gift for Women Mother Mom Wife Girlfriend Men Father Dad
- ...reathable - Made from a high-quality,1680D ballistic polyester for an extra durable, lightweight and breathable design. Well-padded inner layer ensures users' comfort in use..
- New Elastic Loop/Belt Design - SHALL magnetic wristband features a side elastic loop for a woodworking pen and a widened elastic belt for non-metallic tools such as clamps or coils, etc..
- Novel Material - Features two pockets of different depths for holding non-metallic gadgets such as plastic expansion screws, copper/aluminum gadgets, etc. Elastic band material to wrap the pockets mouth to prevent tools from falling off. Double Velcro fastening allows for easy and convenient adjustment to fit any size wrist. Elastic cuff bands on the back for easily wearing on arms..
- Ideal Gift - A special tool gift for Mother's Day or Birthday of your handyman or mother or father, Must Have Gift for Birthdays, and other Holidays for any DIY, contractors, handyman, father/Dad, mother/Mom, Girlfriend, Men, Women, Boy, daughter, Son, Teacher,Husband, Boyfriend, etc..
Check Stock
