54 PCS Wire Brush Wheel Cup Brush, Wire Brush for Drill 1/4-Inch Shank Brush Kit Brass Coated Wire Brushes Set for Rust/Corrosion/Paint Removal, Wire Cup Brushes for Cleaning

  • ...the bristles(1-1.5time).It can easily remove rust, paint, dust and burrs on metal and wood surfaces, and can also be used to smooth welding spatter.
  • Wide use:Roughening,planing,deburring,edgehoning,structuring, descaling,paint stripping,weld seams, derusting, grinding,finishing,polishing and surface treatment of metals, cast steel,non-ferrous metals, steel ,soft wood and hand wood materials.
Check Stock

NOYAFA NF816 New Genuine Underground Cable Wire Locator, Easily Locate Pet Fence Wires, Metal Pipes, Electrical Wires, Telephone Wire, Coax Cable

  • Helpful-locating & tracking buried and hidden wires and other hidden-wires. Only for wires & cables, NOT FOR sprinkler or irrigation valves.
  • Easily locate pet fence wires, metals wires, metals pipes, electrical wires, ect.
  • Locate-Determining Which Receptacles are on specific circuits,track-Pinpointing Drill Sites before drilling.
  • Wire tracer range-up to 2 feet deep and 1000 feet in length.
  • WARNING: Do not use on live circuits to avoid damaging the Tester! This device is ONLY to locate non-energized Cable.
  • WARNING: Only for single-core or two-core parallel wire, NOT FOR multi-core wire and bundled wires..
Check Stock

NOYAFA D3IN0580-B Underground Cable Wire Locator, Easily Locate Pet Fence Wires, Metal Pipes, Electrical Wires, Telephone Wire, Coax Cable

  • Helpful-locating & tracking buried and hidden wires and other hidden-wires. Only for wires & cables, NOT FOR sprinkler or irrigation valves.
  • Easily locate pet fence wires, metals wires, metals pipes, electrical wires, ect.
  • Locate-Determining Which Receptacles are on specific circuits,track-Pinpointing Drill Sites before drilling.
  • Wire tracer range-up to 2 feet deep and 1000 feet in length.
  • WARNING: Do not use on live circuits to avoid damaging the Tester! This device is ONLY to locate non-energized Cable.
  • WARNING: Only for single-core or two-core parallel wire, NOT FOR multi-core wire and bundled wires..
Check Stock

WENORA Drill Wire Wheel Cup Brush Set 9 Piece, 0.010in Coarse Carbon Steel Crimping Wire Wheel, Thicken Face Width with1/4In Hex Shank - For Power Drill Paint Rust Removal

  • ...drill bits and mold grinding machines, and the maximum speed is 4500 RPM. Long-term use of the wheel brush will not be asymmetrical and distorted..
  • Applicationr-oughening,planing,deburring,edge honing,structuring,descaling,paint stripping,weld seams, derusting, grinding,finishing,polishing and surface treatment of metals, cast steel,non-ferrous metals, steel ,soft wood and hand wood materials..
Check Stock

WENORA 20 Pack Wire Brush Wheel Cup Brush Set , Wire Brush for Drill 1/4 Inch Arbor 0.012 inch Coarse Carbon Steel, Wire Wheel for Drill for Cleaning Rust and Abrasive,for Drill Attachment

  • ...drill bits and mold grinding machines, and the maximum speed is 4500 RPM. Long-term use of the wheel brush will not be asymmetrical and distorted..
  • Applicationr-oughening,planing,deburring,edge honing,structuring,descaling,paint stripping,weld seams, derusting, grinding,finishing,polishing and surface treatment of metals, cast steel,non-ferrous metals, steel ,soft wood and hand wood materials..
Check Stock

E-Z Lok Threaded Insert, 18-8 Stainless Steel, Helical, #6-40 Internal Threads, 0.138\ Length (Pack of 10)

  • THREADED INSERT FOR METAL – E-Z LOK Coil Thread Inserts for metal. Also known as wire thread inserts or helical threaded inserts..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this steel thread insert..
  • 18-8 STAINLESS STEEL WIRE – 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Before installation, the metal threaded insert diameter is larger than the hole and then reduced during installation..
Check Stock

E-Z Lok Threaded Insert, 18-8 Stainless Steel, Helical, M8-1.25 Internal Threads, 8mm Length (Pack of 10)

  • THREADED INSERT FOR METAL – E-Z LOK Coil Thread Inserts for metal. Also known as wire thread inserts or helical threaded inserts..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this steel thread insert..
  • 18-8 STAINLESS STEEL WIRE – 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Before installation, the metal threaded insert diameter is larger than the hole and then reduced during installation..
Check Stock

BAILUK Wire Wheel Cup Brush Set,0.012-Inch Coarse Crimped Carbon Steel,Die Grinder Wire Brush for Drill,1/4In Hex Shank,Wire Drill Brush Se (24 Pack)

  • ...ok like new. Also they can be fitted to a pillar drill in the workshop for a more permanent set up..
  • 【APPLICATION】Roughening,planing,deburring,edge honing,structuring,descaling,paint stripping,weld seams, derusting, grinding,finishing,polishing and surface treatment of metals, cast steel,non-ferrous metals, steel ,soft wood and hand wood materials..
  • 【BRAND GUARANTEE】If you are not satisfied with the size, the functions or any other reasons, just reach out to us and we’ll be happy to resolve any problems you may face to make you satisfied..
Check Stock

iCrimp PL2100 Diagonal Flush Cutter, 5-Inch Side Cutting Pliers, Electronics Pliers with Pointed Nose for Reeled Terminals, Soft Wires, Electronics, Jewelry Making, Zip Tes, Plastic

  • PL2100 Wire Flush Cutter: This diagonal flush cutter is ideal for cutting soft materials such as tie-wraps, plastics, and soft metals. It features an opening spring for ease of use and is crafted from vanadium electric steel, forged and oil-hardened..
  • High Leverage Design: Features a high leverage joint design that provide up to 35% greater cutting power. Ergonomic handles provide comfort and safety for any job you tackle. Spring-loaded for self-opening action..
  • Ultra Sharp Wire Cutter: Short jaws and beveled cutting edges permit close cutting of wire. Induction-hardened cutting knives for long life. Hot-riveted joint ensures smooth action and no handle wobble. Pliers with sharp, pointed nose for precise tip cutting and trimming of printed circuit boards..
  • Usage: Non-beveled for flush cutting spruces off plastic components or cutting tie-wraps, plastic, and soft metals, Ty-Rap,Zip Ties,Thin Wire, Headpins, Eye Pins, Small Chain, Tiger Tail, Cords, Beading Do Not Cut Any Steel. Perfect for electricians and jewelers..
  • Material: Made of high quality chrome-vanadium steel. Cut capacity 6 AWG. Dipped handles for comfort and protection against electric shock..
Check Stock

E-Z LOK Coil Threaded Insert For Metal 18-8 Stainless Steel Helical Wire Thread Insert 8-32 Internal Threads, 0.328\ Length, Pack Of 10

  • THREADED INSERT FOR METAL – E-Z LOK Coil Thread Inserts for metal. Also known as wire thread inserts or helical threaded inserts..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this steel thread insert..
  • 18-8 STAINLESS STEEL WIRE – 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
  • FOR USE WITH APPLICATIONS – The 8-32 threaded insert is designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Before installation, the metal threaded insert diameter is larger than the hole and then reduced during installation..
Check Stock

E-Z LOK Coil Threaded Insert for Metal 18-8 Stainless Steel Helical Wire Thread Insert 1/2-13 Internal Threads, 0.750\ Length, Pack of 5

  • THREADED INSERT FOR METAL – E-Z LOK Coil Thread Inserts for metal. Also known as wire thread inserts or helical threaded inserts..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this steel thread insert..
  • 18-8 STAINLESS STEEL WIRE – 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
  • FOR USE WITH APPLICATIONS – The 1/2-13 threaded insert is designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Before installation, the metal threaded insert diameter is larger than the hole and then reduced during installation..
Check Stock

Xcelite 1178MN SHEARCUTTER,MICRO

  • Shearcutter flush cutting tools require less than half the operator force of most wire and lead cutting tools and transmit proportionately less shock to the component.
  • Flush cutting for precise tip cutting and delicate applications which require minimal shock transmittal and wire tip.
  • Flush cut soft wire up to 14 AWG (1.6mm). Not recommended for hard metals or plastic materials..
  • Complies with MIL-STD-2000, DOD-STD-2000, and WS-6356E standards.
  • Grips are molded of wide, shock-absorbing material for operator comfort.
  • ESD Safe reduces the possibility of a charge build up which can cause failure or damage to components/products.
Check Stock

AuInn 72 PCS Wire Wheel Brushes Kit Steel Wire Wheels Pen Brushes Set for Rotary Tools Polish Clean Tools

  • 【Applications】: This Wire Wheel Brushes Set is usually used for metal surface cleaning, derusting, grinding, dusting, deburring, polishing, stripping residue, Remove burrs, rust, dust, removing the oxide layer on surface like ferrous and non-ferrous metals, castings, welded joints, rivets, rust, stone, glass..
  • 【Quality Material】: Use Brass and stainless steel as raw materials, the wire brush set is corrosion-resistant, not easy to rust. Having a long service life..
  • 【Package Contents】: 12 PCS Brass Pencil Wire Brush, 12 PCS Stainless Steel Pencil Wire Brush, 12 PCS Brass Wire Wheel Brush, 12 PCS Stainless Steel Wire Wheel Brush, 12 PCS Brass Cup Wire Wheel Brush, 12 PCS Stainless Steel Cup Wire Wheel Brush..
  • 【Using】: Fit your hand drill, drill press, and foredom tool.(Shank Diameter 2.9 mm. Do not run in excess of 15,000 RPM.) Please make sure you wear a good pair of safety glasses and other Protective equipment before using the wire brush set!.
  • 【Note】: Please feel free to contact us if you meet any problems during use. We would try our best to solve any problem for you..
Check Stock